Notes

The Ultimate Guide To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism started to fail? Perhaps the handles on your uPVC windows and doors aren't aligned correctly or are difficult to operate.

You will lose energy when your double-glazed doors do not function properly. This increases the chance of burglary. click this over here now will be able to fix your door lock at an affordable price.

Snapped Key

If a key is snapped off within a lock, it can be incredibly frustrating. double glazing repair near me poses a security risk since the door may not be locked and could leave you vulnerable to intruders. Fortunately, there are quick fixes that you can use to solve the issue and get your door working properly again.

First, remember to stay double glazing repairs . If you panic and begin doing a lot of fumbling around, you might just end up pushing the broken piece of the key further into the lock, which could make the situation much worse.

Next spray WD-40 or another penetrating oil into the lock to make the broken piece slide out more easily. You can also use a screwdriver to break any pieces stuck. If you have a piece of the key still sticking out, grab it with the help of a paperclip or any other thin metal object and pull it. Both of these methods work well, however, be cautious not to push the broken piece of the key further into the keyway.

Some paperclips have grooved edges, which can serve to extract hooks, and some jigsaw blades are also suitable for this purpose. If you do not have any of these available, you can use needle-nose pliers that bend to create a hook. Additionally, a pair of tweezers is a good way to grip and remove the remaining part of the broken key.

If you cannot remove the broken piece of key then you can use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present in the lock.

If none of these strategies seem to be helping you, it's the time to contact locksmith. The experts at Fitlocks can quickly resolve issues with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms so that they are more easy to use. Request a repair for your double glazing through us online or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can pose an extremely risky security issue. It's fortunately a simple repair for an expert locksmith to complete. Locksmiths will need to tap the cylinder in order to repair it. They can do this with the hammer or any other tool, but the best way is to make use of an extended match or piece of wire. Position the match or the wire end near the keyway. The locksmith will hit the lock to break it open. This is superior to using a hammer, which can damage the lock.

Overheating is the primary reason for cylinder heads to crack. This can happen when the cylinder block as well as the cylinder head are made of different metals, such as cast iron and aluminum. Different metals can heat up and cool down at different rates. This can cause localized hotspots to expand more quickly than the rest.

Corrosion is another possible reason for fractures in cylinders. If the head and block of a cylinder are not maintained properly they could be corroded or rust and cause them to expand faster than expected. As time passes, this may cause cracks.


If your uPVC window or door lock is stiff and requires a lot more pressure to turn, it could be due to a variety of reasons. A malfunctioning locking mechanism, misalignment, or a worn handle are common reasons for this issue.

Fortunately, this is an easy and affordable fix for the majority of double glazing owners. A professional locksmith will typically be able to solve this issue within a matter of hours after arriving at your residence. They can fix the locking mechanisms, or change the window handles, and also change the gearboxes, depending on your specific needs. A skilled locksmith will always be able to advise you of the most cost-effective solution for your home. They can also suggest upgrades to 3 Star security Euro cylinders, TS007, that will add an extra layer of protection against burglars. It's a small price to pay for the peace of mind that comes with knowing your uPVC doors are secure.

Broken Handle

It's not a surprise that window handle locks can break. They are equipped with complex mechanisms that become less effective over time. If yours fails it may be difficult to determine the source of the issue. Make sure you fix it properly.

The issue could be in the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you stop the draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

Screwdriver When the window is open, loosen the screw holding the handle. This should be located on the inside of the back plate, which is usually covered by an attractive cover for the screw for aesthetic reasons. It is not recommended to lose any internal components of the handle, such as the plates and levers on either side. Ideally, keep these in the same order so you can replace them again if needed.

Then, rotate the handle until it's 90 degrees to the window frame and loosen the screw at the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is removed, you should be able to pull the handle off and take out the broken spindle. Replace this with a new one, making sure it's the same size as the old one (you will typically find them on the internet or in hardware stores) and securely screw it into the right place. Don't over tighten the screw as this can damage the handle and the window frame.

Close the handle and try it. It should work smoothly and you'll be able to open your windows once more.

While you're working on the handle, don't forget to ensure that your uPVC windows are closing properly. If they don't close correctly, you could encounter damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the frames of your windows to ensure that they close properly.

Broken Spindle

It is often the case that the spindle inside the handle breaks, rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle to operate an locking device within the frame of the window. The handle is connected to a central rod that triggers the locks that are shaped like mushrooms and secure the window frame keep. If the dead latch mechanism does not open after the handle is turned, it's likely the spindle is damaged. This could be a problem that is frustrating.

There are ways to fix this issue. A reputable locksmith can swiftly and effectively fix the issue. They can remove the window handle using a tool to remove the wheel component of the mechanism that is where the spindle is. This is done without causing any damage to the handle or causing other damage to the frame of the window.

After removing the wheel, the technician can examine the spindle to determine what caused it to break. This involves breaking the spindle into its individual components and carefully observing their general condition as well as any specific areas of wear or damage. This process is typically done in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any dirt or other debris that could be hindering its normal functioning. After that, the spindle can be repaired or replaced. If it is being replaced the technician can take the dowel that is similar in size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centers sell generic replacements, but if your window design is unique then you'll require contacting an expert in woodworking or cabinet making who can recreate the exact component. Once the spindle has been installed, it is connected to the handle. The screw holes on the handle with the screws that are already in the frame. Once the handle is securely set, you are able to operate your uPVC windows.

Here's my website: https://doodleordie.com/profile/pantsmaid35