Notes

What's Holding Back What's Holding Back The Double Glazing Door Lock Repairs Industry?
Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism not working properly? Maybe the window or door handles aren't aligned correctly or are difficult to use.

It is essential that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at a reasonable price.

Snapped Key

It can be quite frustrating when a key snaps inside the lock. This can also be a security issue, as it may make you vulnerable to a burglar if the door is not locked. Fortunately, there are simple fixes you can attempt to fix the problem and get your door working correctly.

Be sure to remain calm. If you get scared and start poking around wildly you may end up pushing the damaged piece of the key further into the lock, which could make the situation worse.

Then spray WD-40 or a different penetrating oil into the lock to make the broken piece slide out more easily. You can also use a screwdriver to break off any pieces stuck. If you have a part of the key that's stuck then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges, which can serve as hook extractors, and some jigsaw blades are also suitable for this purpose. If you do not have any of these handy, you can use needle-nose pliers to bend them and create hooks. Finally, you can use a pair of tweezers grab and pull out the last piece of broken keys.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It's available at most hardware stores and is used to freeze any moisture that may be present within the lock.


If none of these strategies seem to be helping then it's probably the time to contact a locksmith. Fitlocks experts can fix problems such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms to ensure that they are simpler to use. Book a double glazing repair through us online or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder could pose a major security risk. A professional locksmith can easily repair the cylinder. To repair the cylinder, a locksmith will need to tap it. They can do this with a hammer or other tools, but the most effective method is to employ a long match or piece of wire. Then, position the match's end or wire near the keyway. After that, the locksmith will strike the lock to crack it open. This is far better than using a hammer that can damage the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can occur when the block and cylinder head are made from different metals, such as cast-iron or aluminium. Different metals will be heated and cool at different rates. This could cause localized hotspots to expand more quickly than the rest of the cylinder.

Corrosion is a different cause of cracks in the cylinder. If the cylinder block and head are not maintained in a timely manner they may corrosion or rust and cause them to expand more than anticipated. This can cause cracks in the future.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn, it could be due to a variety of causes. A defective locking mechanism, misalignment or an old handle are the most common reasons for this issue.

Fortunately it is a simple and inexpensive fix for most homeowners of double glazing. A professional locksmith will typically be able to solve this problem within an hour after arriving at your residence. Depending on your needs, they can replace the locking mechanism, change the window handles, and also change the gearboxes. A skilled locksmith will always be able to inform you of the most cost-effective option for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which provide an additional layer of protection against burglars. This is a small price to pay for the security that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks are complex mechanisms that become less effective as time passes and usage, so it's no surprise that they can break. If yours fails, it can be difficult to pinpoint the cause of the issue and make sure you fix it correctly.

The issue could be with the internal locking mechanism or the latch, repairing your broken handle will increase your uPVC double glazing door's security and help you stop draughts. It can be expensive to replace or repair your handle incorrectly and it could also harm the frame and lock of your door.

With the window open, loosen the screw holding the handle using a screwdriver. This should be located on the inside face of the back plate, and is normally hidden by a screw cover for aesthetic reasons. Be careful not to lose any of the internal parts within the handle, such as the levers or plates on either side of the spindle. Ideally, keep these in the same place so you can replace them when needed.

Then, with a second screwdriver loosen the screw that connects the handle with the spindle on the back. Once the screw is free, you can pull the handle out and take out the broken spindle. Replace it with a brand new spindle, ensuring it's the same length (you can find them online or in hardware stores). Securely screw it in place. Do not overtighten the screw because this could cause damage to the handle and window frame.

Close the handle and try it. It should work smoothly and you'll be able to open your windows after a few times.

While you're working on the handle, be sure to ensure that your uPVC windows are shut properly. If they don't close properly, you may experience draughts or damp in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they close correctly.

Broken Spindle

It is more common for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These types of windows require a handle which operates a locking mechanism in the window frame. The handle is attached a central rod that triggers the locks that are shaped like mushrooms and lock into the window frame keep. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle is broken and this could be a frustrating problem.

Fortunately there are ways to fix this problem. A good locksmith can quickly and efficiently fix this problem. A professional locksmith will be able disassemble the window's handle using a tool to remove the wheel part that houses the spindle. This is done without causing any damage to the handle or causing any other damage to the frame of the window.

After removing the wheel the technician will inspect the spindle and identify what caused it to break. This involves breaking down the spindle into its individual parts and meticulously noting their general condition, as well as any particular areas of damage or excessive wear. This procedure is typically performed by technicians in an environment that is clean.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that may be obstructing it from functioning normally. The spindle could be replaced or repaired. If it is being replaced the technician will need an identical dowel size to the original and drill mating holes into both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the spindle is damaged and cannot be repaired, it might need to be replaced entirely. Home centers offer generic replacements but If the style of your window is rare then it will be necessary to contact a wood worker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be attached to the handle by line up the screw holes on the handle with the frame's existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.

Website: https://perfectworld.wiki/wiki/Glazing_Repair_Near_Me_Tools_To_Enhance_Your_Daily_Life