Notes

15 Reasons Not To Be Ignoring Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism not working properly? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

It's important that your double-glazed doors work smoothly, otherwise you will lose energy and increase the chance of burglary. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

If a key breaks in the lock, it can be extremely difficult. It could also be a security risk since the door might not lock and leave you open to intrusion. There are a few easy fixes you can make to fix the problem and make your door work again.

Keep calm. If you panic and start doing a lot of fumbling around, you might just end up pushing the broken piece of the key further into the lock, which could make the situation even more difficult.

Next spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also use the screwdriver to break up any pieces that are stuck. If you happen to have a small piece of the key left visible it, you can make use of a paperclip, or any other thin metal object to grab it and pull it out. Both methods work well, but be very careful not to push the damaged piece of the key further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you do not have any of these handy, you can use needle-nose pliers to bend them and create hooks. Additionally, a pair of tweezers is a good way to grasp and remove the remaining part of the broken key.

If you cannot remove the broken key piece then you can use a lock deicer. It's available in many hardware stores and works by freezing any moisture present within the lock.

If none of these strategies appear to be working you, it's time to call locksmith. Fitlocks experts can quickly fix problems such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms so that they are simpler to use. Get a double glazing repair through us online or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder could pose an extremely risky security issue. It's a good thing that it's a simple repair for an expert locksmith to complete. To fix the cylinder, a locksmith will need to tap it. They can do this with a hammer or other tool, but the most efficient way is to use a long match or piece of wire. Then, put the end of the match or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is much safer than using a heavy hammer that could harm the lock.

The most frequent cause for cylinder head cracks is overheating. This can happen when the cylinder block and head are made from different metals, such as cast iron and aluminum. When the different metals heat up and cool down at different rates, it can create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion can be a reason for cracks in the cylinder. If the head and block of a cylinder are not maintained in a timely manner they may corrosion or rust, which can cause them to expand more than anticipated. This can cause cracks over time.

If your uPVC window or door lock is stiff and requires a lot of pressure to turn it could be due to a variety reasons. A defective locking mechanism, misalignment or an old handle are the most common reasons for this issue.

This is a straightforward and inexpensive fix that most homeowners with double glazing can perform. A professional locksmith is able to solve the issue within one hour of arriving at the home. Depending on your needs, they can replace the locking mechanism, change the window handles, or change the gearboxes. A professional locksmith will be able to provide you with a recommendation of the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which give you an extra security layer from burglars. It is a small cost to enjoy the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with time and use, so it's not a surprise they occasionally break. It isn't always easy to pinpoint the reason for a broken window handle lock and fix it correctly.

Fixing the broken handle, whether it's the internal latch or locking mechanism, will improve the security of your uPVC door and prevent draughts. It is costly to repair or replace the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

With the window open then loosen the screw that holds the handle with the screwdriver. The screw should be on the inside of the backplate, which is usually covered by an eye-catching cap to conceal it for aesthetic reasons. It is not recommended to lose any internal parts of the handle such as the plates and levers on either side. Ideally, keep these in the same order so that you can replace them again when needed.

Next, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle using a second screwdriver. Once this is removed, you should be in a position to pull the handle off and pull out the broken spindle. Replace it with a new one, making sure it is the same length as the previous one (you can usually find these on the internet or in hardware stores) and then securely screw it into place. Don't over tighten the screw as this could cause damage to the handle and window frame.

Check that the new handle is correctly fitted Close the window and test the handle. The hope is that it will function smoothly and you'll be able open your window again.

Be sure to double-check that your uPVC window is shut correctly when you're using the handle. If they don't, you could experience damp and draughts in your home as and also affecting the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure that they close correctly.

Broken Spindle

It is often the case that the spindle in the handle is broken, not the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle to operate an locking device within the window frame. The handle is connected to a central rod which triggers a set of cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism fails to open when the handle has been turned, it is most likely the spindle has been damaged. This could be a frustrating problem.

Luckily, there are ways to rectify this issue. A skilled locksmith can quickly and effectively fix the issue. They will be able to remove the window handle using a tool that removes the wheel component of the mechanism that is where the spindle is. This is done without causing any damage to the handle or causing other damage to the frame of the window.

After removing the wheel the technician can examine the spindle and determine the cause of the break. This involves breaking the spindle into its individual components and carefully observing their general condition as well as any specific areas of damage or excessive wear. This procedure is typically carried out by technicians in a clean environment.

Then, clean the damaged spindle. This will help get rid of any dirt or other debris that may be obstructing it from functioning normally. The spindle can be replaced or repaired. If it's being replaced, the technician can take an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.


If the damaged spindle cannot be repaired it may need to be replaced entirely. Home centers sell generic replacements but if the window design is unusual then you'll have to speak with a cabinet maker or woodworker who can recreate the exact part. Once the new spindle is installed, it can be positioned to the handle by lining up the holes for screws in the handle with the frame's existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

Read More: https://list.ly/wngyd36