Notes

Five Killer Quora Answers To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism faulty? Perhaps the window or door handles aren't aligned correctly or are difficult to use.

It is essential that your double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

When a key snaps off inside a lock, it could be extremely frustrating. It's also potentially a security risk since the door may not be locked and make you vulnerable to intruders. There are a couple of quick fixes you can make to fix the problem and make your door work again.

Be sure to remain calm. If you panic, you could end up pushing the broken key further into the lock.

Spray WD-40, or another penetrating oil, into the lock. This will allow the broken piece emerge more easily. You can also use a screwdriver to break any pieces stuck. If https://www.repairmywindowsanddoors.co.uk/corby-windowrepair/ enough to have a bit of the key left visible and you want to remove it, use a paperclip or some other thin metal object to grab it and remove it. Both methods are effective, but you need to be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as a hook extractor and some Jigsaw blades can also be used for this function. If you don't happen to have one of these tools then you can bend a hook with needle-nosed pliers. Finally, a pair of tweezers is a good way to grasp and pull out the last piece of the key that was broken.

If you are unable to remove the broken piece of key, use a lock deicer. This is usually available at most hardware stores, and it is used to freeze any water or ice that could be in the lock.

If none of these solutions work, it could be time to call a locksmith. Fitlocks experts can quickly solve problems like broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. You can request a double-glazing repair online or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. It's fortunately a simple repair for an expert locksmith to complete. A locksmith must tap the cylinder in order to fix it. They can do this using an hammer or another tools, but the most effective way is to use a long match or a piece of wire. Then, place the match's tip or wire near the keyway. The locksmith can then hit the lock to break it. This is more secure than using the hammer, which could damage the lock.

The most frequent cause of cylinder head cracks is overheating. This can occur when the cylinder head and block are made of different metals, such as cast-iron or aluminum. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.

Corrosion can be a cause of fractures in cylinders. If the cylinder head as well as the cylinder block aren't properly maintained, this can cause corrosion or rust that could cause them to expand at greater rates than they ought to. This can lead to cracks in the future.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn, it could be due to a variety reasons. This problem can be caused by a malfunctioning locking mechanism or misalignment, as well as a worn-out handle.

Fortunately it is a simple and inexpensive fix for most double glazing owners. A professional locksmith should be able to solve this issue within a matter of hours of arriving at your property. Based on your requirements they will be able to replace the locking mechanism, replace the window handles, and change the gearboxes. A professional locksmith will be able to inform you on the most cost-effective solutions for your home. They can even recommend upgrades to the highest-security 3 Star TS007 euro cylinders that will provide an extra layer of security against burglars. It's a small price to pay for the peace of mind that comes from knowing that your uPVC doors are safe.

Broken Handle

Window handle locks have complex mechanisms that become less effective with age and usage, so it's no surprise they occasionally break. If yours breaks it may be difficult to identify the cause of the issue and make sure that you repair it correctly.

Fixing the broken handle, regardless of whether it's the internal latch or the locking mechanism will increase the security of your uPVC door and stop draughts. If you do not repair or replace the handle could be costly and may harm the door's frame as well as lock It is therefore worth taking some time to do it correctly.


With the window open, loosen the screw that holds the handle using the screwdriver. The screw should be on the inside of the backplate, usually hidden by a screw cap for aesthetic purposes. Be careful not to lose any internal components inside the handle, such as the plates or levers on either side of the spindle. Ideally, keep them in the same place so you can re-install them when needed.

Next, turn the handle so it's at 90 degrees to the window frame and loosen the screw at the back of the handle which holds it to the internal spindle by using another screwdriver. Once the screw is loose, pull the handle out and remove the broken spindle. Replace it with a new one, making sure it's the same length as the previous one (you will typically find them on the internet or in hardware stores) and securely screw it into place. Be careful not to tighten too much as this could cause damage to the handle or the window frame.

Close the handle and try it. It should function smoothly and you'll be able to open your window once again.

While you're working on the handle, don't forget to make sure your uPVC windows are shut correctly. If they're not closing properly, you may experience damp or draughts inside your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on your window frames to ensure they close correctly.

Broken Spindle

It is more likely for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These windows require a handle that acts as a locking device in the window frame. The handle is connected to a rod in the centre that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle has broken This can be a frustrating problem.

Luckily, there are options to fix this problem. A reputable locksmith can swiftly and efficiently solve the issue. They will be able to take apart the window handle using a tool that can remove the wheel portion of the mechanism that is where the spindle is. This is done without damage to the handle or window frame.

Once the wheel has been removed, the technician will inspect the spindle and determine what caused it to break. This involves disassembling the spindle and examining each component part, noting any damage or excessive wear. This procedure is usually carried out in a clean room by skilled technicians.

The next step is to clean the damaged spindle. This will remove any debris or dirt that might be obstructing its normal functioning. The spindle could be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is comparable in size to the original. The technician will then drill matching holes into both pieces. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centers offer generic replacements. However, if the design of your window is unusual then you will need to speak with a woodworker or cabinet maker who can replicate the exact model for you. Once the new spindle has been installed it can be positioned to the handle by lining up the holes for screws in the handle and the frame existing screws. Once the handle is securely in place, you can use your uPVC windows.

My Website: https://www.repairmywindowsanddoors.co.uk/corby-windowrepair/