Notes

Why Window Sash Repairs Is The Right Choice For You?
Window Sash Repairs

Check the windows sashes regularly for any damage, mildew and mold. By catching these problems early you will save money on future repairs.

The sash is the interior framing that can be moved vertically upwards or downwards in windows that open. This article will demonstrate how to do a variety of simple repairs to sash.

Weather Stripping

Wooden window sashes are a great way to add a classic look to your home. They are also durable and can last many years when they are maintained properly. However, they may become damaged or degrade in time because of exposure to the elements and normal wear and tear. However, sash repair experts can restore your windows to their original condition and maintain their appearance for a longer period of time than replacement windows.

Weather stripping is the first aspect to consider when you are repairing windows with sash. It's on both the frame and sash. If it's damaged or worn out, it can cause drafts, as well as other issues. To fix it, start by finding your window brand and the date on which the glass was manufactured (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash, and mark its width and height so that you can purchase replacement weather stripping that matches.

Then, remove the sash from the holder and place it on an even surface that allows you to access all four sides. If your sash has been double-hung, you must remove the weights using their ropes that should fall into the pocket in the jamb lining. Once you've removed the sash, use a utility knife to cut off the weather stripping that was formerly in place at the corners, and then remove it manually or using a putty knife.

Once the sash has been cleared, you can install the stoppers that separate the two sashes. These are long pieces of wood that divide the two sashes. Pam likes to replace them with standard 1/2-inch by 3/4-inch window trim from the lumberyard, however you could also use scrap wood.

After removing the parting stops and trimming them to the desired length, apply a thin layer of glazing compound to the bottom of the sash. Smooth the compound using your putty tool, and allow it to dry for at least one day. Once the putty has fully dried it is possible to apply a topcoat of acrylic latex. This will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that holds the window sashes may wear out over time and with use. This can result in the window or door that is difficult to open or close. It's important to know that replacing and fixing this hardware is usually straightforward and cost-effective. If you're having difficulty opening the sash, spray some oil into the jamb channel. Then, slide the sash open to see if that fixes the issue. If the problem persists it's most likely the sash balance. You'll need to take off the window sash in order to get access to this part of the hardware.

Window sashes should open and close with little effort. However, this may be difficult if weights are worn out or the sash-to-rail connecting rail isn't covered with. This issue can be caused by a variety of reasons, such as the lack of maintenance or an incorrect weight rating for the particular sash.

If the hinge arms of a window are beginning to lose their elasticity, this could cause the sash to drag and eventually strike the frame in the corner opposite the hinge arm (Photo 1). To fix the problem ensure that the sash is centered in the frame opening, and then remove it. If the sash was fixed to the hinge arm, take it off the hinge and replace it. (Photo 2). Then, put in the new sash (Photo 3).

Windows that are old, especially in older houses, can be difficult to close and open due to hinges that are sagging and an overall inefficiency. In many instances, a few minor repairs can transform these windows into smooth operation for the first time and save the homeowner cash on energy costs.

It is crucial to have the tools you require before you start. Start by marking the location of the hinge channel on the frame with pencil (Photo 1). This will assist you in getting the channel back in the correct position after you've finished. Then, remove the sash and remove the hardware including the beads that separate (Photo 2) and the chains or cords that hold it in place. Soften any hardened putty using a heat gun set to medium and fitted with an shield for the nozzle. Remove the old sash and store it in a bag with a label.

Sash Weights

Sash weights are able to be replaced to improve the performance of your window sash and decrease energy costs. Sash weights are heavy lead or iron cylinders enclosed inside a hidden compartment and linked to the moveable sash by a rope. These weights act as counterbalances, allowing you to open and shut the window without the need for mechanical or electrical devices. When upvc window repair fail, sashweights are often ignored or disabled by homeowners.

It's difficult to retrieve the sash-weight that fell from the cavity, so you'll want to find one that fits properly. You will also require a fresh piece of string, a length sashcord and a few sashpulleys for tying the weights you are replacing to the cord.


Older wood windows are joined using mortise and tenon joints. Hammers and pins can be used to remove the wood pegs that hold the parts together. The majority of them have an enormous diameter on one side and a smaller diameter on the other, so it is crucial to take out the smaller-diameter sides first. Sashes that were made later in the century used glue instead of pegs. They can be separated by cutting the glue line using the help of a knife, and then tapping the mortised part loose using a mallet.

After the sash is released, you can remove sash stops and access the pockets for weights. This is typically done by drilling an opening at the bottom of each jamb. This hole is then covered by an access panel made of wood that can be cut off to let you view the inside of the frame.

Once the sash is stopped and the access panel is removed, you are able to remove the old weight and replace it. Be sure to weigh the sash before you do this, since the old weights may be a different size than the one you need. After the new weight is installed, you can thread the string through the sash pulling mechanism. Then, attach the string to the boxed frame. Leave a few inches at the end of the string to allow for future adjustments.

Sash Cords

In most old double-hung window, a chain or cord is attached to the weights. This helps keep the sashes of the jamb balanced. Over time, these chains may become damaged and render it impossible to raise the windows. A new sash cable can restore the ability to raise and lower the sash, and keep it in place when it is opened.

To replace sash cords, the first step is to remove the access panels from the jambs. They are typically screwed or nailed into and must be removed. You could use a hammer and chisel for removing them, but it's always better to lay down dust sheets before commencing any work.

After you have removed the access panel, you are able to begin to work on the sash. Utilize a flat bar, or chisel, to pry the tiny parting beads out of their grooves. They are usually wedged in or nailed, but they can be removed which is why it's worth your time. If the sash is in place, break the mortise and tenon joints with pin punch and hammer or screwdriver, then unhook the wood pegs attached to each component. You should now be able to move the sash back and forth freely, although it might require oil if it feels stiff.

With the sash open With the sash in an open position, measure the sash chain or cord to extend from the pulley at the top of the jamb to the sash slot in the bottom. Cut the chain or cord and attach it in the previous step. You can employ a hammer, screws or nails, but nails are less likely to cause damage.

It's best to leave the original weights in place unless you have purchased a kit that will replace the counterbalance that was previously installed. It's not expensive to buy them from a salvage store and they'll be simple to install once you've got the sash open. Depending on the size of your window, one or two sashweights could be needed to keep the sash in an open position.

My Website: https://bonner-stafford.thoughtlanes.net/7-small-changes-that-will-make-the-difference-with-your-windows-repair