Notes

The Most Common Mistakes People Make Using Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like aluminum and timber.


It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this case you'll need find some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you are going attempt to remove the window panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is large, you might want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you are happy with the fit of the window, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism wears out. Fortunately, it's easy to repair a loose uPVC window handle yourself. You'll first need to close the window and do an initial fitting. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to act if you awake each day to discover mouldy walls and floors that are wet. Windows that leak water do are not just a cause for degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be put on. When it is time to uPVC repair, you should be careful not to over-caulk. This will only make your window harder to clean and reduce its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze, it may be the hinges that are at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change the hinges on a window but it's much easier if someone else helps you hold the frame.

Check that the uPVC hinges are open and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer advice.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also lower the risk of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become misaligned due to wear, which can cause an opening where the sash meets frame. They can be fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it's possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

The next most common reason for draughts is window seals. These can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen the risk of draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be put on top of your windowsill. They will keep your home warm by blocking cold air.

With upvc window repair and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a life span and they may reach an point at which it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.

Here's my website: https://sloan-gunn.mdwrite.net/five-repair-window-lessons-from-the-pros