Notes

These Are The Most Common Mistakes People Make With Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like aluminum or timber.


It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace, and they typically fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to locate some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea tape the gap once the glass is removed. This will prevent water and drafts from entering your property until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is substantial, you may prefer security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you're happy with the fit, tighten the screws until they stay in position.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any competent DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer is applied. When it comes to uPVC repair, you should avoid over-caulking. This will make your window harder to clean and lower its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

repairmywindowsanddoors of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier to do with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also lower the chance of windows sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges, also due to wear and tear may become displaced, which causes a gap to form where the sash joins the frame. If they're beyond repair, it might be required to realign them. The interlock may be misaligned. This happens on the hinge's side and may need to be cleaned. In some instances it might be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is essential to remember that all windows eventually wear out and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.

Website: https://www.repairmywindowsanddoors.co.uk/aldershot-windowrepair/