Notes

The 10 Worst Double Glazing Lock Repairs Fails Of All Time Could Have Been Prevented
Double Glazing Lock Repairs

Good locks on your windows and doors will stop burglars from getting into your home. They usually don't want to break glass or try to get through windows that are open.

Some owners of double glazing, however, have had issues with their door or window lock after the installation. These issues can usually be resolved without the need for a new double glazing.

Broken or faulty locks

If your uPVC door or window lock is broken or faulty or has a problem, a locksmith will repair it for you. They will be able to repair the hinges, striker plates and locks on your double-glazed. They will also be able to adjust the cylinder's position to correct any misalignment issues that could be causing the handle to not function correctly.

The mechanism might be jammed when the key fits into the lock, but it will not turn or be difficult to insert. This could be due to dirt or grime getting stuck in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or Teflon and not oil, as oil attracts dirt and cause it to stick to the mechanism's inside. After lubricating, insert the key into the lock and turn it. The lubricant should be absorbed into the mechanism and the lock should spin easily.

A faulty lock can also be caused by loose screws in the mechanism of the lock. They may loosen and fall out or even break completely preventing the lock to perform as it should. These screws can be tightened using a screwdriver, but you must be careful not to over tighten them. This can damage the internal components.

A damaged lock can be dangerous for your family and you. This is particularly relevant if you have young children. They can open the door without your knowledge which gives them access to your house. If you're worried about the possibility that this could occur, a licensed professional locksmith can help you to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing, who can repair all kinds of damaged and damaged mechanisms such as handles, cylinders, handles and lock systems on both uPVC windows and doors. We can also alter the locking mechanism on your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.

Handles that are damaged or broken

Many double glazed windows feature the multi-point lock as part of the overall security package. This is an excellent option for those who are concerned about burglars who are opportunistic and trying to gain entry into their home. Ask your installer about antilift blocks. They can be installed in addition to existing locks and can aid in keeping your windows closed.

Handle locks are usually damaged or fail. They are the first component that a criminal will use to force open your window. The good news is, this is one of easiest parts to fix.

Modern uPVC handles and aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette which is designed to ward off forced entry. This security upgrade is available as an option for new uPVC windows. As an optional upgrade, older style handles made of aluminium or uPVC that are no longer used can be upgraded to the shoot bolt locking system.

It is important to repair the handle as soon as you can if it's damaged. A damaged handle can stop the window from closing correctly and allow drafts in. It can also be a flaw that opportunistic thieves could exploit and put the belongings of your family and your own at risk.

The process of fixing the malfunctioning mechanism begins by gaining access to the frame of the window and removing the broken handle. The gearbox that opens the handle is located and the model is identified, so that a replacement may be sourced which is in line with the profile of the internal window frame mechanism.

After the mechanism is replaced the handle can be returned to the original screws. We recommend replacing them with more long screws to ensure the most secure fit. The final step is to apply a coat of clear sealant in order to protect the handle from further corrosion. After you've completed this step the window should be functional again, and at a fraction the cost of replacing it.

Hinges that are broken or Faulty

If your windows aren't shut properly, draughts could get in, your home's security barriers will become weaker and there's an increased chance of water damage or damp. Broken or defective window hinges are a common issue that can be fixed easily.

If you have a uPVC window that won't close or open it's likely that the hinges are damaged or broken and require replacement. A lot of window manufacturers will require you to buy an entirely new window unit in order to fix this simple issue, but we are able to replace the hinges and save you money.

Window hinges are often damaged through repeated use, or weakened over time by corrosion. If you've got a broken window hinge, it's important to take precautions to prevent further damage. This includes not causing the window to close or open.

The type of hinge you are looking for will help you locate the right parts to repair it. Maco, Mila and Roto are all manufacturers of window hinges. Consult a professional to avoid purchasing parts that will not work with your existing hardware. webpage can result in more damage.


Faulty hinges can be a huge problem for your uPVC window and doors. They can be a major source of noise, and could also allow water to infiltrate your windows.

Make sure whether the pin barrels on both hinge halves are aligned. If not, tap the head pin using the hammer to create an arc in the barrel of the hinge. This will hold the pin in position. Then, ask a friend to hold the door as you take the hinges and hinges from both the doorjamb and the door. Replace the hinges using those that are the same size and install the screws with glue. Finally fix the hinges using clamps or weights while the glue dries.

After you have repaired your hinges, you can reinstall the door. You could also reattach the handle. It is recommended to replace the screws with the same length of dowels as the original screw so that they match up with each other.

Broken or Faulty Glass

uPVC Windows can be damaged over time, despite the fact that they are great at keeping cold out and keeping heat. This can be the case with broken or damaged glass, as well as faulty locks. If neglected, this could become a very costly issue. It can also hurt your home's aesthetics and lead to a loss in insulation. It is important to repair any damage immediately.

If your glass has broken but isn't shattered it is usually possible to repair it yourself using the appropriate tools and techniques. Make sure that the area around the glass that has been broken is free of debris so that any pieces of glass do not cause injuries or trip hazards. Then, you must remove any broken pieces and dispose of them properly. Apply masking tape across the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window, it's best to prepare the glass before gluing it back into place to ensure that you'll have enough space to complete the project.

Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the directions for application and curing, which can vary from product to product. You may need to clamp the broken glass with lightweight clamps designed to support fragile materials, based on the angle.

Once the adhesive has fully cured, carefully install the glass in the window frame. Make sure it's flush with the frame edge and that there aren't gaps between the glass sash as well as the frame. Be careful not to bend the window as it's being put back in place, as this can weaken the seal and lead to condensation and water infiltration.

Get in touch with a professional glazier, such as O'Brien(r) for an exchange if your glass window is completely shattered. Leaving broken glass unattended can be a risk to pets and children It's therefore essential to act swiftly.

My Website: https://etextpad.com/