Notes

Three Reasons Why You're Double Glazing Door Lock Repairs Is Broken (And How To Fix It)
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism become faulty? Maybe the handles on your uPVC windows or doors aren't aligned correctly or are difficult to use.

You'll be wasting energy when your double-glazed doors do not function properly. This also increases the likelihood of burglaries. Owen the Locksmith can repair your door lock at a reasonable price.

Snapped Key

When a key snaps off inside a lock, it could be extremely difficult. It also poses a security risk since the door may not lock and could leave you vulnerable to burglars. There are a couple of quick solutions you can use to repair the issue and make your door work again.

Remember to remain calm. If you panic and begin poking around wildly you may end up pushing the broken piece of the key even further into the lock, making the situation worse.

Spray WD-40, or any other penetrating lubricant into the lock. double glazing repair near me will allow the broken piece emerge more easily. You can also employ a screwdriver in order to break up any stuck pieces that might be blocking the way. If you're fortunate enough to have a small piece of the key that is hanging out, you can make use of a paperclip or other metal object that is thin to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that can be used to extract hooks, and some jigsaw blades are also suitable for this use. If you don't have any of these handy, you can use needle-nose pliers to bend and create a hook. You can also use a pair of tweezers grab and remove the remaining pieces of broken keys.

If you're unable to pull the broken piece of key out, you can try using a lock de-icer. It is found in most hardware stores. It works by freezing any water or ice that could be in the lock.

If none of these solutions seem to work, it might be time to call a locksmith. Fitlocks experts can quickly resolve issues with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also alter your double glazing door mechanisms to make them more user-friendly. Request a repair for your double glazing with us online, or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. Luckily, it's an easy repair for an expert locksmith to complete. A locksmith must tap the cylinder to repair it. This can be done with a hammer, or any other tool. However, the most effective method is to make use of a wire or a long match. The match or wire end near the keyway. The locksmith can then strike the lock in order to break it. This is better than using a hammer, which can harm the lock.

Overheating is the most common cause of cylinder heads cracking. This can occur when the cylinder block and head are made of different metals, like cast iron and aluminum. Different metals will heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest.

Another possible cause for cracks in the cylinder is corrosion. If the cylinder block and head are not maintained correctly, they can rust or corrode and cause them to expand faster than expected. In time, this could cause cracks.

If your uPVC door or window lock is brittle or requires lots of pressure to turn, this could be due to several things. This problem can be caused by a malfunctioning locking mechanism or misalignment, as well as a worn-out handle.

It is a quick and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will usually solve the issue within one hour of arriving at your home. They can repair the locking mechanisms, or change the window handles and change the gearboxes, depending on the specific requirements of your home. A skilled locksmith will always be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star Euro cylinders, TS007, that will add an extra layer of security against burglars. It is a small cost to pay for the peace-of-mind that comes from knowing your uPVC door is secure.

Broken Handle


It's not a surprise that window handle locks could break. They are equipped with complex mechanisms that become less effective over time. It isn't always easy to pinpoint the reason for the problem and then fix it properly.

Repairing your damaged handle, whether it's an internal locking mechanism or latch will increase the security of your uPVC door and stop draughts. When you aren't doing it right, replacing or repairing your handle can be very costly and may harm the door's frame as well as lock, so it's worth taking the time to do it right.

Screwdriver: With the window open remove the screw that holds the handle. This should be located on the inside face of the back plate, and is normally hidden by an aesthetically pleasing cover for the screw reasons. Be careful not to lose any of the internal parts within the handle, for example the plates or levers that are on either side of the spindle. Keep them in the same arrangement so that it is easier to replace if necessary.

Then, rotate the handle until it's 90 degrees to the window frame. Finally, loosen the screw on the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is released, you'll be able to pull the handle off and take off the damaged spindle. Replace it with a brand new spindle, ensuring it's the same length (you can find them online or at hardware stores). Screw it in place. Be cautious not to overtighten as this could cause damage to the handle or the window frame.

Close the handle and try it. The hope is that it will function smoothly and you'll be able open your window again.

Be sure to double-check that your uPVC window is shut correctly when you're using the handle. If they're not closing properly cause draughts and damp in your home as well as compromising the efficiency of your home's energy usage. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is most common in uPVC tilt and turn windows. These windows require a handle that operates an locking device within the window frame. The handle is connected to a rod in the centre that in turn activates mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism does not open after the handle has been turned, it is likely the spindle is damaged. This can be a frustrating issue.

There are ways to fix this problem. A skilled locksmith can quickly and efficiently solve the issue. A reputable locksmith will be able disassemble the handle of the window by using a tool to take out the wheel portion that houses the spindle. This can be done without damage to the handle or the window frame.

Once the wheel has been removed, the technician can inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its constituent components and carefully observing their general condition as in addition to any specific areas of wear or damage. This procedure is typically carried out by technicians working in an environment that is clean.

The next step is to clean the damaged spindle, this helps eliminate any dirt or debris that could be hindering its normal function. After that the spindle could be repaired or replaced. If it is replaced, the technician could use the dowel that is similar in size to the original and drill mating holes into both parts of the spindle. This ensures that the new spindle has an exact fit with the handle.

If the damaged spindle is beyond repair, it may be required to replace it completely. Home centres sell generic replacements. However, if the style of your window is rare then it is necessary to speak with a woodworker or cabinet maker who can make the exact part for you. Once the new spindle is installed, it can be positioned to the handle by lining up the holes for screws in the handle with the frame's existing screws. Once the handle is in place, you can use your uPVC windows.

Here's my website: https://blogfreely.net/flareclef8/five-lessons-you-can-learn-from-double-glazing-repairs-cost