Notes

10 Things We Love About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the cloth instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the distance between the window and the door is significant, you may prefer security screens that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need to open the window to get to the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. upvc window repair near me that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a fairly simple fix that can be done by any competent DIYer. Depending on how severe the problem is, the old caulking may have to be removed. When it comes to uPVC repair, you must avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes have no debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze It could be hinges at the fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It's very simple to change the hinges on a window, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to offer advice.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, can become misaligned, this will cause an opening to appear where the sash meets the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. The interlock may also become misaligned. This happens on the hinge side and could require to be cleaned. In some cases it might be necessary to replace these.


The next most common reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as you can.

Homepage: https://anotepad.com/notes/cx8wkabx