Notes

5 Common Phrases About Repairs To Upvc Windows You Should Stay Clear Of
Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike www.repairmywindowsanddoors.co.uk and aluminium, they do not get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you are going attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap between the door and the window is substantial, you may prefer security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to access the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen up. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges will be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be simpler with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.


The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you advice.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause gaps to develop where the sash meets the frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them re-aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

The next common reason for draughts are the window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.

My Website: https://www.repairmywindowsanddoors.co.uk/weybridge-windowrepair/