Notes

Problem Trouble And Solutions Of Floating Fish Feed Equipment
Problem Issue And Solutions Of Floating Fish Feed Equipment

Trouble Problem Of Fish Feed Machine

Your floating fish feed equipment will come out various troubles after it functioned a long time, or as a result of your incorrect operation, your fish feed equipment has actually happened problems or otherwise functioning well even stopped working.

Usual issues are low production output, too high puffing or otherwise sufficient puffing, and also bad pellet creating, versus these trouble problems, specifically on bad pellet developing issue, a few of our clients fulfilled this kind of issue, some as a result of basic materials formula, some as a result of incorrect operation, and also in below we will certainly provide some troubleshooting and services for you.

Troubleshooting Of Fish Feed Equipment

Solutions Of Low Production Outcome

1. The screw head is used greatly, please alter the screw head or the entire screw


2. The bushing of the extrusion chamber is used significantly, please change the bushing in the extrusion chamber

3. If you changed the formuation or not? for sinking kind pellets: starch content percent: ≥ 20%, for floating kind pellets: starch content percentage: ≥ 10%. Additionally: Specifically for floating hop pelletizer , the web content of pet protein must not be too high.

The role of starch:

1). richi machinery has strong water absorption;

2). The gelatinized starch can boost the thickness of the product

3). Dual feature of puffing and binding in the last pellets

The role of healthy protein:

1). Healthy protein has water absorption, elasticity and also coagulation

2). Healthy protein is divided right into: veggie protein and animal protein, Formulas including vegetable healthy protein are usually simpler to process than those including pet protein. Since animal protein is not as easy to incorporate with other components or bulk as veggie healthy protein or starch

4. Is the aperture area of the die is suitable or otherwise?

A= 1aperture area area= πr2, 10holes-8mm die 8mm diameter= 4mm redius.

area= πr2, 3.14 × 16= 50.24 mm2.

10 holes × 50.24= 502.4 mm2.


Solutions Of Expensive Puffing Or Otherwise Sufficient Puffing.

1. the raw products are puffed a lot also highly.

1) the conditioner temperature is too expensive( for damp kind equipment).

2) the turning speed of the host maker is expensive.

3) excessive or also less water included the raw products or in the conditioner.

4) the holes of the die mould is obstructed.

2. The puffing degree of the product is insufficient.

1) the extruder production ourput is low.

2) the conditioner temperature level is inadequate high.

3) the rotating rate of the host machine is as well reduced.

4) the home heating plate temperature in the extrusion chamber is also low.

5) water content is as well low in the conditioner or in the raw material.

6) have you ever before altered the formulation.

3. Poor pellet forming.

1) the raw materials solution is not so great.

2) the functioning temperature is too expensive or too reduced.

3) feeding resources is not balanced.

4) the reducing speed is not right, too expensive or also reduced.

5) the reducing blades are put on.

6) the size of powder raw materials is also large, you can inspect right here the raw materials dimension requirement.

die mold aperture φ (mm) grinding fineness required.
1.095% reach to 90-100 mesh.
1.595% reach to 80 mesh.
2.095% reach to 80 mesh.
3.095% reach to 60 mesh.
4.095% reach to 60 mesh.
5.095% reach to 60 mesh.

4. sheep feed pellet machine are harsh surface area and also various lengths.

1) some partial holes of the die mould are obstructed.

2) the finness of the raw products is not enough.

3) the raw products conditioning is bad.

4) the top quality of the die mould holes is poor.

5) the cutting blades are used.

6) the water percent in the raw products is not correct.

5. The extrusion temperature level is too reduced.

1) the steam conditioning temperature is also reduced (for wet type machine).

2) The vapor inlet pipeline of the puffing chamber is blocked or the temperature of the electric heating device is not enough( for damp kind machine).

3) Jacketed vapor line (catch) plugged( for wet kind maker).

4) The temperature level of the electric heating plate is also low or the electric heating switch is not turned on.

5) Basic material wetness is too high.

6. Particles are obstructed before exiting the die hole.

1) The particle size of the raw product is as well large relative to the size of the die hole.

2) The quantity of water is not enough to make the product flow.

3) the screw rod is put on significantly.

4) The feeding inlet is obstructed.


Website: https://cnrichipelletizer.mystrikingly.com/blog/rabbit-pellet-making-machine