Notes

20 Trailblazers Leading The Way In Double Glazing Lock Repairs
Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows will stop burglars from getting into your home. They aren't likely breaking glass or trying to get through windows that are open.

However, some double-glazing owners have experienced issues with their door or window lock after it was installed. Fortunately, these issues are usually fixable and don't require to pay for new double glazing.

Broken or faulty locks

A locksmith can repair your uPVC window or door lock if it's damaged or is not working properly. They can repair the hinges, striker plates and locks on your double-glazed. They can also reposition the cylinder in order to fix any misalignment that could be causing your handle not to operate correctly.


The mechanism may be locked if the key fits in the lock, but it does not turn or is difficult for you to insert. Grease or dirt can be trapped in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. It is important to apply a dry lubricant such as graphite or teflon instead of oil which can attract dirt and stick to the interior of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should make through the mechanism, and the lock should be able to rotate with ease.

The loose screws inside the lock mechanism are another reason for a broken lock. They can become loose, fall out, or even break off completely, preventing the lock from being able to function properly. A screwdriver can be used to tighten these screws however, care must be taken not to tighten them too much, since this could cause damage to internal components.

A faulty lock is dangerous for your family and you. double glazing repairs is especially relevant if you have young children. They can easily unlock the door without your knowledge which gives them access to your house. If you're concerned that this might occur, a professional locksmith can help you to secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair all kinds of damaged and damaged mechanisms handles, handles, cylinders, and lock systems for both uPVC windows and doors. We can also reconfigure the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are damaged or broken

A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great choice for those worried about criminals who are looking for ways to gain access to your home. Ask your installer about antilift blocks. They can be put in as an addition to the existing locks and will ensure that your windows are securely closed.

It's not uncommon for handles to be damaged or fail. They are the first component of your window that could be pushed open by criminals intent on breaking in. The good news is that this is one of the easiest parts to fix.

Modern uPVC and aluminium handles feature a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installation. As an upgrade option, older style uPVC or aluminium handles that are no longer in use can be upgraded to the shoot bolt locking system.

When a handle is faulty it is essential to get the handle repaired as quickly as possible. Handles that are damaged can prevent the window from closing correctly and also allowing drafts to enter. It could be a weakness that burglars with a plethora of opportunities could exploit, therefore putting your family and belongings at risk of being taken.

The process of fixing the failed mechanism starts with getting access to the window frame and removing the broken handle. The gearbox that opens the handle is then accessed and the type identified so that a replacement can be found that is in line with the profile of the internal window frame mechanism.

After the mechanism has been replaced, the handle may be reattached using the original screws. We recommend replacing them with more long screws since they provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further deterioration. Once that's done, your window will be functional again, and at a fraction of the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows do not close properly, draughts could enter your home, the security barriers will weaken and you run an increased risk of water damage or damp. Window hinges that break or become faulty are a common problem and can be easily repaired.

If your uPVC windows don't close or open and close, it's likely the hinges need to be replaced or repaired. While many window companies require you to purchase a new window unit in order to resolve this simple issue, we're able to replace the hinges that are damaged and save you money.

Window hinges can be damaged through repeated use, or weakening over time due to corrosion. In the event of a broken hinge, it's important to take steps to prevent further damage by being careful not to force the window open or closed.

You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all window hinges. It's best to consult an expert in this situation so that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and cause further damage.

Faulty hinges are a major problem for uPVC doors and windows. They can be a major source of noise and can also allow water infiltration which can damage your windows.

To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If not tapping the headpin, use the hammer to make a slight bend in the hinge barrel. This will help keep the pin in the right position. Have a person hold the doors as you take out hinge screws and hinges. Replace the hinges with ones that are of the same size, and install the screws with glue. Finally put the hinges in place using weights or clamps while the glue is drying.

After you have repaired your hinges, you can put the door back in place. You can also reattach the handle. It is a good idea to replace the screws using the same length of dowels as the screw that was originally used so that they align with each other.

Glass that is broken or damaged

uPVC Windows can be damaged over time, despite the fact that they are excellent at keeping out the cold and retaining the heat. This could include cracked or damaged glass as well as defective locks. If left unattended, this can be a costly problem. It can also affect the appearance of your home and can lead to loss of insulation, so it is essential to fix any damage as quickly as you can.

If the glass is broken but isn't shattered it is possible to fix it yourself with the proper tools and techniques. Make sure that the area surrounding the broken glass is clear of debris, so that shards do not cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in the proper way. Then, put masking tape to the entire area to prevent fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-pane glass, it's best to fit the glass pane before glueing it back in place so that you are sure you'll have enough space to finish the project.

Use a dry, clean cloth to clean the glass's surface and the frame before applying the glue. Follow the directions for application and curing time that can differ from product to. Depending on the angle of the crack, you may want to hold the glass to hold it in place during curing. This can be done using lightweight clamps that are specifically designed to support fragile materials.

When the adhesive has completely cured, carefully reinstall the glass into the window frame, making sure it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid flexing the glass as you reinstall it in order to weaken the seal. This could lead to condensation or water infiltration.

Contact a professional glazier such as O'Brien(r) for an appointment to replace your glass if the window is completely broken. It's essential to act swiftly when you notice broken glass.

Here's my website: https://fnote.me/notes/3xM7fQ