Notes

The Advanced Guide To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You'll be wasting energy when your double-glazed doors do not function properly. This increases the risk of burglary. Owen the Locksmith will be able to fix your door lock at an affordable price.

Snapped double glazing repairs near me can be frustrating when a key snaps into the lock. It also poses a security risk, as the door may not lock and leave you vulnerable to burglars. There are fortunately simple fixes you can try to resolve the problem and get your door operating properly again.

The first step is to remain calm. If you panic, you could end up pushing the damaged key further into the lock.

Spray WD-40, or any other penetrating lubricant into the lock. This will assist the broken piece to come out more easily. You can also make use of a screwdriver to break up any stuck pieces that could be hindering the flow. If you're fortunate enough to have a little bit of the key that is hanging out, you can use a paperclip or some other metal object that is thin to grab it and then pull it out. Both of these methods work, but be cautious not to push the broken piece of the key even further into the keyway.

Some paperclips have grooved edges, which can be used to extract hooks, and some Jigsaw blades also work for this function. If you don't have any of them handy, you can make use of needle-nose pliers that bend to create hooks. Finally, a pair of tweezers can be used to grasp and pull out the remaining part of the broken key.

If you're unable to pull the broken piece of the key out, try using a lock de-icer. It is available at all hardware stores, and it is used to freeze any water or ice that could be in the lock.

If none of these solutions seem to work, it might be time to call a locksmith. Fitlocks experts can fix problems such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Our Webpage glazing repair via our website, or give us a phone call to discuss your needs.

Broken Cylinder

A broken cylinder can be an extremely risky security issue. It's fortunately a simple repair for professional locksmiths to complete. To fix the cylinder a locksmith will need to tap it. They can do this using an hammer or another tool, but the most efficient method is to employ a long match or piece of wire. Position the match or the wire end near the keyway. The locksmith can then strike the lock in order to crack it. This is far better than using a hammer that can harm the lock.

Overheating is the main reason behind cylinder heads cracking. This can happen when the cylinder head and block are made of different metals, such as cast-iron or aluminium. Different metals will heat up and cool off at different rates. This could cause localized hotspots to expand faster than the rest of the cylinder.

Another reason that could cause cracks in cylinders is corrosion. When the cylinder head and cylinder block are not properly maintained, it can result in corrosion or rust that could cause them to expand at more than they ought to. In time, this could cause cracks.

If your uPVC window lock or door is brittle or requires lots of pressure to turn, it can be the result of several things. A defective locking mechanism, misalignment or a worn handle are common causes of this problem.

Fortunately it's a simple and affordable fix for the majority of double glazing owners. A professional locksmith will usually solve this issue within an hour of arriving at the home. Depending on the needs of your home they will be able to replace the locking mechanism, change the window handles, or change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective solutions for your home. They can even recommend upgrades to the highest-security 3 Star TS007 euro cylinders that will add an extra layer of security against burglars. It's a small amount to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with time and use, so it's no surprise they occasionally break. It can be difficult to determine the reason behind the broken window handle lock and repair it correctly.

Repairing your damaged handle, regardless of whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and stop draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and could cause damage to the door's frame and lock It is therefore worth taking the time to do it correctly.

Screwdriver: With the window open, loosen the screw holding the handle. It should be located on the inside face of the back plate, and is normally concealed by a screw cover for aesthetic reasons. Be sure not to damage any of the internal parts within the handle, for example the levers or plates on either side of the spindle. Keep them in the same arrangement to make it easier to replace them if needed.

Then, turn the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is loose, you should be capable of pulling the handle off and pull out the broken spindle. Replace this with a new one, making sure that it's the same size as the old one (you can typically find these online or in hardware stores) and then securely screw it in the correct position. Do not tighten the screw too much as this could damage the handle and the window frame.

Close the handle and test it. Hopefully, it will work smoothly and you'll be able to unlock your window.

While you're working on the handle, don't forget to ensure that your uPVC windows are closing properly. If they're not then you may experience draughts and damp in your home, as in addition to compromising your home's energy efficiency. Core Sash Windows is a local window company that can adjust the hinges on the frames of your windows to ensure that they shut properly.

Broken Spindle

It is quite common that the spindle in the handle is broken, not the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that operates an locking device within the window frame. The handle is attached to a central rod that triggers the locks that are shaped like mushrooms and secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned, it is most likely the spindle is damaged. This could be a frustrating issue.

Fortunately, there are options to rectify this issue. A professional locksmith will be able to quickly and effectively fix this issue. A professional locksmith will be able disassemble the window's handle using a tool to take out the wheel portion in which the spindle is. This can be done without causing any damage to the handle or causing any other damage to the window frame.

Once the wheel is removed, the technician can inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as well as any particular areas of damage or excessive wear. This process is typically carried out in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any debris or dirt that might be obstructing its normal functioning. The spindle may then be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. He will then drill holes that are identical to both pieces. This will ensure that the spindle fits perfectly with the handle.


If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centres sell generic substitutes but if the window design is unique you'll need to contact an expert in woodworking or cabinet making who can recreate the exact part. After the spindle is installed, it is attached to the handle. Place the screw holes on the handle to the screws that are already in the frame. Once the new handle is firmly installed, you are now ready to operate your uPVC window.

Homepage: https://maize-crab-gzrd32.mystrikingly.com/blog/the-most-hilarious-complaints-we-ve-received-about-double-glazing-lock-repairs