Notes

A Productive Rant About Double Glazing Lock Repairs
Double Glazing Lock Repairs

Quality locks on your windows and doors will help prevent burglars from getting into your home. In general, they don't enjoy breaking glass or trying to wiggle through open windows.

look at this site glazing owners, however, have had issues with their door or window lock following the installation. double glazing repair can usually be solved without the need for a new double glazing.

Broken or faulty locks

A locksmith can repair your uPVC window lock or door lock if it is broken or faulty. They will be able to repair the hinges, striker plates and locks on your double-glazed. They will also be able to move the cylinder around to fix any misalignment problems which could cause your handle to not work correctly.

If the key fits into the lock, but it doesn't turn or is difficult to insert, the mechanism might be stuck. Dirt or grease can get stuck in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the inside mechanism. After lubricating the lock, you should insert the key and attempt to turn it. The lubricant should work through the mechanism, and the lock should be able to turn easily.

A damaged lock can be caused by loose screws in the mechanism of the lock. They can loosen, fall out, or even break off completely, preventing the lock from being able to function properly. These screws can be tightened with a screwdriver, but you must be careful not to overtighten them. This could cause damage to the internal components.

A broken lock can be hazardous for your family and you. This is especially the case if you have children. It can be easy for them to unlock the door without you knowing, and this can allow them access to your home. If you're concerned about this happening, then a locksmith who is vetted can provide a quick and efficient service to re-secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing, who can repair all types of faulty and broken mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also alter the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always required.

Handles that are broken or are damaged

As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is a great option for those worried about criminals who are looking to gain entry to your home. Ask your locksmith about antilift blocks. They can be installed alongside your existing locks and can help keep your windows firmly shut.

It's not uncommon for handle locks to become damaged or fail - they are the first part of your window that will be forced open by criminals intent on breaking in. Luckily, the good news is that this is among the most simple parts to fix.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is offered as an option for new uPVC windows. As an optional upgrade, older style aluminium or uPVC handles that are no longer in use can be upgraded to the shoot bolt locking system.

When a handle is faulty it's crucial to get it repaired as soon as is possible. The damaged handles could stop the window from closing properly and allow a draft to enter. It can also be a flaw that thieves can exploit and put the belongings of your family and you at risk.

The process of fixing the damaged mechanism begins with gaining access to the window frame and removing the damaged handle. The gearbox that opens the handle is located and the model is identified so that a replacement can be sourced which matches the profile of internal window frame mechanisms.

Once the mechanism has been replaced the handle can be re-attached with the original screws - however, we generally recommend replacing them with more long screws because this will ensure a more secure fit. The final step is to apply a coating of clear sealant in order to protect the handle from further rust. Once that's done the window will be fully operational again and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or damaged

If your windows don't close properly, you could suffer from draughts or a weakening of your home's security barrier, and an increased risk of water or damp damage. Windows hinges that break or fail to function properly are a common issue and can be easily repaired.

If your uPVC windows won't open or shut, it is likely that hinges need to be repaired or replaced. Many window companies will require you to buy an entirely new window unit to fix this simple issue, but we can replace the hinges and save you money.

Window hinges are often damaged by repeated use, or weakening over time due to corrosion. If you find a broken hinge, it's crucial to take steps to prevent further damage by taking care not to make the window swing open or closed.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all window hinges. It is recommended to consult an expert in this regard to ensure that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and cause further damage.

A damaged hinge can be a big issue for your uPVC window and doors. They can be a major source of noise and also allow water to infiltrate which can damage your windows.

To fix this issue, first check that the pin barrel on both sides of the hinge is aligned. If it isn't then tap the head pin with a hammer to make a small bend in the hinge barrel. This will help to keep the pin in place. Then, ask a helper to hold the door while you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges using those that are the same size and attach the screws using glue. Finally, while the glue is drying, fix the hinges by using clamps or weights.

Once you have repaired your hinges, you can reinstall the door. You could also reattach the handle. Replace the screws with wooden dowels of the same size as the original screw to ensure they are in line.

Broken or damaged glass

While uPVC windows do a great job of keeping cold out and warm in, they may become damaged over time. This can be the case with broken or damaged glass, as well as defective locks. If not taken care of, it can be a costly problem. It can also hurt your home's aesthetics and lead to a loss in insulation. It is essential to repair any damage promptly.


You can fix your cracked glass by yourself if your have the right tools and techniques. Make sure that the area around the broken glass is free of debris, so that pieces of glass do not cause injuries or cause a trip hazard. Then, take any broken pieces and dispose of them in a safe manner. Then, put masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. Pre-fitting the glass pane prior to applying glue is an ideal option when you have a window that has two panes. This will ensure you have enough space to finish your project.

Before applying the glue, wipe the entire surface of the broken frame and the glass with an unclean, dry cloth. Follow the curing and application directions that may differ from product-to-product. Depending on the degree of the crack you may need to hold the glass in place while it is curing. You can do this using lightweight clamps that are designed to hold delicate materials.

After the adhesive has cure, carefully insert the glass into the window frame. Make sure it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Avoid bending the glass as you reinstall it, as this could weaken the seal. This could result in water infiltration or condensation.

If you have a glass window that is completely shattered or has larger cracks, call a professional glazier such as O'Brien(r) to arrange an exchange. Leaving broken glass unattended can pose a safety risk for children and pets and is why it's important to act quickly.

Read More: https://writeablog.net/homeblood87/the-top-reasons-why-people-succeed-in-the-glazing-repair-near-me-industry