Notes

A Provocative Remark About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to source some plastic spacers to help the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A sagging uPVC windows can cause issues with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. After that, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wearing out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges


If your uPVC windows are brittle to open, or slack and open with a breeze it could be hinges at the fault. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you to hold the frame.

Verify that the uPVC hinges open and close in the right direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to offer advice.

It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. you can check here recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also become unbalanced due to wear, which can cause an opening where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window, can also become misaligned, again it's possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a life span and they may reach the point when it's more efficient to replace them than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.

Here's my website: https://www.repairmywindowsanddoors.co.uk/walthamabbey-windowrepair/