Notes

15 Twitter Accounts You Should Follow To Learn About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. However when windows with double panes are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this situation you'll need to source some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the door and the window is large, you might need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll have to open the window to get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.


It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. upvc windows repair will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by improper installation in the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop where the sash meets the frame. They can be fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them re-aligned or replaced. Second, the interlock can be disaligned. It is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.

Website: https://www.repairmywindowsanddoors.co.uk/wokingham-windowrepair/