Notes

Does Technology Make Double Glazing Door Lock Repairs Better Or Worse?
Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism not working properly? Perhaps the window or door handles aren't aligned correctly or are difficult to use.

It is essential that the double glazed doors operate smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

If a key is snapped off inside the lock, it can be extremely annoying. It's also potentially a security risk, as the door may not be locked and could leave you vulnerable to intruders. There are a few easy fixes you can make to resolve the issue and get your door working again.

Be calm. If you get scared and start poking around wildly, you might just end up pushing the broken piece of the key further into the lock, making the situation worse.

Next, spray WD-40 or another penetrating oil into the lock to help the broken piece to slide out more easily. You can also use the screwdriver to break off any pieces stuck. If you have a piece of the key that's still sticking out then grab it using a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the broken key piece further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these items then you can bend a hook with needle-nosed pliers. Finally, you can use a pair of tweezers grasp and pull out the last piece of broken keys.

If you are unable to remove the broken piece of key, use a lock deicer. It's available in many hardware stores and works by freezing any moisture that may be present inside the lock.

If none of these solutions work, it could be time to call a locksmith. double glazing repairs near me are able to quickly solve problems with uPVC door locks and mechanisms such as snapped keys and broken handles. They can also alter the double glazing door mechanisms to ensure that they are more easy to use. You can schedule an appointment online for a double-glazing repair or contact us to discuss your needs.

Broken Cylinder

A damaged cylinder can pose a serious security threat. It's a good thing that it's a simple repair for an expert locksmith to complete. To repair the cylinder, a locksmith will need to tap it. They can do this using a hammer or other tool, but the most efficient method is to employ a long match or piece of wire. Then, put the end of the match or wire close to the keyway. After this, the locksmith can strike the lock to crack it open. This is much better than using a heavy hammer, which could damage the lock.

The most common cause of cracks in the cylinder head is overheating. This can occur when the cylinder block and head are made from different metals, including cast iron and aluminum. When the different metals heat up and cool down at different rates, it can create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion can be a reason for cylinder fractures. If the cylinder block and head are not maintained correctly, they can be corroded or rust and cause them to expand more than they would normally. This can cause cracks in the future.

If your uPVC window or door lock is stiff and requires a lot more pressure to turn it could be due to a variety reasons. A defective locking mechanism, misalignment, or an old handle are the most common causes of this problem.

This is a simple and cost-effective fix that a majority of double glazing owners can do. A professional locksmith can usually solve the issue within one hour of arriving at your property. They can replace the locking mechanisms, or replace the window handles, and also change the gearboxes, based on your particular requirements. A professional locksmith will always be able advise you on the most cost-effective solutions for your home. They can also suggest upgrades to the highest-security 3 Star Euro cylinders, TS007, that will add an extra layer of security against burglars. This is a small price to pay for the security that comes from knowing your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with time and use, so it's no surprise that they sometimes break. If yours breaks, it can be difficult to determine the source of the issue and make sure you fix it correctly.

Whether the problem is related to the locking mechanism inside or the latch, fixing your broken handle can improve your uPVC double glazing door's security and help you to stop the draughts. If you do not repair or replace your handle can be very expensive and could cause damage to the door's frame and lock It is therefore worth taking the time to do it correctly.

With the window in the open position and the window open, loosen the screw that holds the handle using a screwdriver. The screw should be on the inside of the backplate, which is usually covered by the cap of the screw to enhance the appearance. Be careful not to damage any of the internal components inside the handle, for example the plates or levers on either side of the spindle. Ideally, keep these in the same order so that you can re-install them if needed.

Then, using an additional screwdriver, loosen the screw that connects the handle to the spindle in the back. Once the screw is free, you can take the handle off and take the broken spindle out. Replace it with a brand new one, ensuring it's the same size as the old one (you can usually find these on the internet or at hardware stores) and screw it securely into the correct position. Be careful not to overtighten as this could cause damage to the handle or the window frame.

Close the handle and try it. Hopefully, it will work smoothly and you'll be able open your window once more.

While you're working on the handle, don't forget to make sure your uPVC windows are shut correctly. If they're not, you could experience damp and draughts in your home, as well as compromising your home's energy efficiency. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure they close properly.

Broken Spindle


It is more typical for the spindle to break than the handle. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that is a lock mechanism that is located in the frame of the window. The handle is attached a central rod that activates a series of locks that are shaped like mushrooms and lock into the window frame keep. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle is broken This can be a frustrating problem.

There are solutions to this issue. A professional locksmith will be able to quickly and effectively address this problem. A good locksmith will be able disassemble the window's handle using a tool to take out the wheel portion in which the spindle is. This is done without causing any damage to the handle or causing any other damage to the frame of the window.

Once the wheel has been removed, the technician can examine the spindle to determine what caused it to break. This involves disassembling the spindle and inspecting each component, noting any wear or damage. This process is usually performed by technicians in a clean environment.

The next step is to clean the damaged spindle, this assists in removing any dirt or other debris that might be hindering its normal operation. The spindle can be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. The technician will then make holes in the same way into both pieces. This ensures that the new spindle is a precise fit with the handle.

If the spindle is damaged and cannot be repaired, it could require replacement. Home centres sell generic replacements, but if the style of your window is unique then you will need to find a woodworker or cabinet maker who can duplicate the exact model for you. Once the new spindle has been installed it can be attached to the handle by line up the holes for screws in the handle with the frames existing screws. Once the new handle is firmly seated you will be ready to operate your uPVC window.

Homepage: https://notes.io/wrENW