Notes

Think You're Ready To Start Repairs To Upvc Windows? Take This Quiz
Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that assist the new pane to fit correctly into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from entering your home until a professional comes out to repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues such as sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and secure from draughts.


uPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform a test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may need to be removed before a new layer of caulk can be put on. When it is time to uPVC repair, you must avoid 'over-caulking'. This will only make your window harder to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge. This shows which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to give suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges can also be unbalanced due to wear, creating an opening where the sash meets frame. They can be fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it is possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.

just click the following webpage , and most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than fix them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as you can.

Homepage: https://www.repairmywindowsanddoors.co.uk/stevenage-windowrepair/