Notes

20 Questions You Need To Ask About Double Glazing Lock Repairs Before You Buy Double Glazing Lock Repairs
Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows helps to prevent burglars from getting into your home. They don't usually like breaking glass or trying to get through windows that are open.

However, some double glazing owners have experienced issues with their door lock or window lock after it was installed. These problems can often be fixed without the need to replace double glazing.

Broken or damaged locks

A locksmith can repair your uPVC window lock or door lock if broken or faulty. They will be able to fix the striker plates, hinges, and locks on your double glazing. They will also be able to reposition the cylinder to fix any misalignment problems that could be causing the handle to not function properly.

The mechanism could be seized if the key fits in the lock, but it will not turn or is difficult to insert. This can be due to dirt or grime getting stuck inside the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or Teflon but not oil as oil attracts dirt and cause it to stick to the mechanism's inside. After lubricating the lock you must insert the key and attempt to turn it. The lubricant should make its way through the mechanism, and the lock should be able turn without difficulty.

Screws that are loose within the lock mechanism are another cause of a faulty lock. They can loosen and fall out or even break completely, preventing the lock to function properly. A screwdriver can be used to tighten the screws however, care must be taken not to over-tighten them because this could cause damage to internal components.

A broken lock can be hazardous for your family and you. This is particularly relevant if you have young children. They can easily unlock the door without your knowledge and gain access to your house. If you're worried about this happening, a locksmith who is vetted can provide fast and efficient assistance to re-secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing, who can repair all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems on both uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your specific needs, which means that in most cases, replacement windows and doors are not necessary.

Handles that are damaged or damaged

Many double glazed windows feature the multi-point lock as part of the overall security package. This is a great choice for those who are concerned about potential burglars trying to gain entry to their home. Ask your installer about antilift blocks. These can be installed as an addition to the existing locks and help keep your windows firmly shut.

It's not uncommon for the handle locks to get damaged or fail. They are the first component of your window that will be pushed open by criminals who want to break in. The good news is that this is one of the easiest parts to repair.

Modern uPVC handles as well as aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette which is designed to ward off forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installation. As an optional upgrade, older handles made of aluminium or uPVC that are no longer in use can be upgraded to shoot bolt locking systems.

It is crucial to fix the handle as soon as you can if it's damaged. Faulty handles can prevent the window from closing properly and also allowing drafts to enter. It could also be a weakness that opportunistic thieves could exploit and put your family's possessions and you at risk.

To repair the broken mechanism, you first need to gain access to the window frame and remove the damaged handle. The gearbox that opens the handle is located and the model is identified so that a replacement can be found that matches the profile of the internal window frame mechanism.

After the mechanism is replaced the handle can be reattached using the original screws. However, we recommend replacing them with larger screws as they will provide an even more secure fit. The final step is to apply a coating of clear sealant to protect the handle from further rust. After that your window will be fully operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows don't close properly, draughts can be able to enter, your home's security barriers will weaken and you run an increased chance of water damage or damp. Broken or defective window hinges are a common issue that can be fixed easily.

If your uPVC windows won't open or close it's likely that the hinges require to be replaced or repaired. Many window companies will require you to purchase a new window unit to fix this simple issue, but we can replace the hinges in order to save you money.

Window hinges may break from repeated use or they could be weakened by corrosion over time. If you've got a broken window hinge, it's essential to take steps to avoid further damage. This includes not forcing the window to close or open.

You can find the correct parts for your hinge by identifying the type of hinge it is. The most common types of window hinges include Maco, Mila, Roto and many other brands. Talk to a professional before buying parts that do not fit with your existing hardware. This can result in more damage.

A damaged hinge can be a major issue for your uPVC window and doors. They can be a major source of noise and also allow water to infiltrate which could damage your windows.

To resolve this issue, first make sure whether the pin barrel on both sides of the hinge is aligned. If it isn't then tap the headpin using a hammer in order to make an incline in the hinge barrel. This will help keep the pin in position. Have a person hold the doors while you take out hinge screws and hinges. Replace the hinges and install screws using glue. After the glue is drying, put a secure hold on the hinges using weights or clamps.

After you have fixed your hinges, you are able to put the door back in place. You could also reattach the handle. It is a good idea to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each the other.

Broken or faulty glass

While uPVC windows do an excellent job of keeping the cold out and warm in, they are susceptible to becoming damaged over time. double glazing repair near me can be the case with damaged or broken glass and damaged locks. This is a problem that can be very expensive when left unattended. This can also detract from the appearance of your home and can result in a decrease in insulation. It is crucial to repair any damage promptly.

If your glass has cracked, but not broken it is usually possible to repair it yourself using the right tools and techniques. First, ensure that the area surrounding the glass is clean to ensure that any shards do not harm anyone and aren't an accident hazard. Then, you must remove any pieces of broken glass and dispose of them properly. Apply masking tape to the entire area. This will stop glass shards from sticking to your skin and scattering when you move them. If you're dealing with a double-pane glass it's best to pre-fit the pane of glass before glueing it back in place to ensure that you'll have enough space to complete the task.

Use a clean, dry cloth to wipe clean the glass's surface and the frame prior to applying the glue. Follow the instructions for application and curing which may differ from product to. Based on the degree of the crack you may need to hold the glass in place during curing. This can be done using lightweight clamps designed to hold delicate materials.

After the adhesive has set, carefully place the glass into the window frame. Make sure it's aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Be careful not to bend the window while it's put back in place, as this can weaken the seal and cause condensation and water infiltration.


Contact a professional glazier, like O'Brien(r) to arrange an exchange if your glass window is completely shattered. It's crucial to act fast if you have broken glass.

My Website: https://www.repairmywindowsanddoors.co.uk/bedford-windowrepair/