Notes

15 Incredible Stats About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism broken? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

It is essential that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

It can be frustrating when a key is snapped into the lock. It could also be a security risk, as the door may not lock and leave you vulnerable to burglars. Fortunately, there are quick fixes that you can use to solve the issue and get your door functioning correctly.

Be calm. If you panic and begin poking around wildly you may end up pushing the broken piece of the key deeper into the lock, thereby making the situation even more difficult.

Spray WD-40, or any other penetrating lubricant, into the lock. This will help the broken piece emerge more easily. You can also make use of a screwdriver to break up any pieces stuck that could be hindering the flow. If you have a chunk of the key that is stuck out and is not being removed, grab it with a paperclip or other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you do not have any of these available, you can use needle-nose pliers to bend them and create hooks. Finally, you can use a pair tweezers to grab and pull out the last bit of the broken keys.

If you're unable to pull the broken piece of key out, you can try using a lock de-icer. repairmywindowsanddoors.co.uk at most hardware stores and is used to freeze any moisture that may be present within the lock.

If none of these tricks seem to be helping you, it's the time to contact a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also reconfigure your double glazing door mechanisms to make them easier to operate. You can book an appointment online for a double-glazing repair or contact us to discuss your requirements.

Broken Cylinder


A broken cylinder can be a serious security risk. A professional locksmith is able to fix the cylinder. Locksmiths will need to tap the cylinder in order to repair it. They can do this using a hammer or other tool, but the best way is to make use of a long match or piece of wire. Then, put the end of the match or wire close to the keyway. The locksmith will then hit the lock to crack it. This is better than using the hammer, which could cause damage to the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and cylinder head are made from different metals, such as cast iron and aluminum. Different metals can heat up and cool down at different rates. This can cause localized hotspots to expand more quickly than the rest.

Another reason that could cause cracks in cylinders is corrosion. When the cylinder head and cylinder block are not properly maintained, it can cause corrosion or rust that could cause them to expand at more than they should. As time passes, this may cause cracks.

If your uPVC door or window lock is stiff or requires a lot of pressure to turn, it can be the result of several things. A defective locking mechanism, misalignment, or the wear of the handle are typical causes of this issue.

Fortunately, this is an easy and inexpensive fix for most double glazing owners. A professional locksmith should be able to resolve the issue within an hour after arriving at your residence. Based on your requirements they will be able to replace the locking mechanism, replace the window handles, and change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective options for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that offer an additional security layer from burglars. This is a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that become less effective with time and use, so it's not a surprise they occasionally break. It can be difficult to determine the reason for the broken window handle lock and then fix it properly.

The issue could be in the internal locking mechanism or the latch, repairing your broken handle can improve your uPVC double glazing door's security as well as help you stop drafts. It could be costly to repair or replace your handle incorrectly and it can also harm the frame and lock of your door.

Screwdriver Open the window remove the screw that holds the handle. This should be located on the inside of the back plate, which is usually hidden by a screw cover for aesthetic reasons. Be sure not to lose any internal components inside the handle, for example the plates or levers that are on the opposite side of the spindle. Ideally, keep them in the same place so you can replace them again when needed.

Then, with an additional screwdriver loosen the screw that connects the handle to the spindle on the back. Once the screw is loose, you should be able to pull the handle off and pull out the broken spindle. Replace it with a new one, ensuring it's the same size as the old one (you will typically find them on the internet or in hardware stores) and securely screw it into place. Be careful not to overtighten as this could cause damage to the handle or the window frame.

Ensure the new handle is correctly installed, then close and test the handle. The hope is that it will function smoothly and you'll be able to unlock your window.

Be sure to double-check that your uPVC window is shut correctly while you're working with the handle. If they don't cause draughts and damp in your home, as and also affecting the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges on the frames of your windows to ensure that they close correctly.

Broken Spindle

It is quite common that the spindle in the handle breaks, rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These types of windows require a handle that operates a locking mechanism in the frame of the window. The handle is connected to a centre rod that is then activated by a series of cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism is not able to open when the handle is turned, it is most likely the spindle has been damaged. This can be a frustrating issue.

Luckily there are options to rectify this issue. A professional locksmith will be able to quickly and effectively fix this problem. A professional locksmith will be able to disassemble the window's handle using a tool to remove the wheel part in which the spindle is. This can be done without causing any damage to the handle or causing any other damage to the frame of the window.

Once the wheel is removed the technician can then inspect the spindle to determine what caused it to break. This involves breaking down the spindle into its component parts and meticulously noting their general condition, as well as any specific areas of wear or damage. This procedure is typically carried out by technicians in a clean environment.

The next step is to clean the damaged spindle. This will help remove any debris or dirt that might be preventing it from functioning normally. The spindle may be replaced or repaired. If it is replaced, the technician can take an identical dowel size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle can't be repaired, it might need to be replaced entirely. Home centers sell generic replacements. However, If the style of your window is unique then it will be necessary to contact a wood worker or cabinet maker who can make the exact component for you. Once the new spindle is installed, it can be fitted to the handle by line up the screw holes on the handle with the frames existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.

Homepage: https://www.repairmywindowsanddoors.co.uk/southend-windowrepair/