Notes

How To Outsmart Your Boss In Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance you'll need find some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the door and the window is significant, you may want to use an alarm system that includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows to get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you cannot reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to take action if you get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do can not only cause destruction of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. When it is time to uPVC repair, you should avoid over-caulking. This will only make your window harder to clean and reduce its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze it could be hinges at fault. They can be easily replaced by any competent DIYer and can be completed in just a few minutes.


Like any mechanical component hinges will wear out over time. It is essentially a very simple procedure, but it is simpler with someone else to help hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to give suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also lower the possibility of a window sticking and help prevent corrosion. My Home Page is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, causing an opening between the frame and sash. If they are beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it is feasible to give them a clean but in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes filled with some sort of filler and can be put on top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it's best to seek professional assistance as soon as you can.

Read More: https://www.openlearning.com/u/ayalahussain-s5hh2i/blog/TheReasonsYouLlWantToFindOutMoreAboutWindowRepairNearMe