Notes

How To Explain Double Glazing Door Lock Repairs To Your Boss
Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism started to fail? Perhaps the window or door handles aren't able to connect correctly or are difficult to use.

It is essential that the double glazed doors operate smoothly, otherwise you will lose energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

It can be quite frustrating when a key gets stuck inside a lock. It also poses a security risk, as the door may not lock and leave you vulnerable to intruders. There are fortunately quick fixes you can attempt to fix the problem and get your door functioning correctly.

First, remember to stay calm. If you panic you may end up pushing the broken key further into the lock.

Then, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also employ a screwdriver in order to break pieces that might be blocking the way. If you're lucky enough to have a bit of the key that is hanging out and you want to remove it, use a paperclip or some other thin metal object to grab it and pull it out. Both methods work, but be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have one of these tools, you can bend a hook using needle-nosed pliers. Additionally, double glazing repair of tweezers is a good way to grasp and remove the remaining part of the broken key.

If you are unable remove the broken piece of key, use a lock deicer. It's available in many hardware stores and works by freezing any moisture present within the lock.

If none of these solutions work, it could be time to contact a locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also alter your double glazing door mechanisms to make them more user-friendly. You can schedule repairs to your double-glazing online or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder poses an extremely risky security issue. A professional locksmith can easily fix the cylinder. A locksmith will have to tap the cylinder to fix it. They can do this with the hammer or any other tool, but the best method is to make use of a long match or piece of wire. The match or wire's end close to the keyway. After that, the locksmith can strike the lock to crack it open. This is more secure than using a hammer that could cause damage to the lock.

Overheating is the most common reason behind cylinder heads cracking. This can occur when the cylinder head and block are made from different metals like cast-iron and aluminium. When the various metals heat up and cool down at different rates, it may create hotspots in the local area that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion can be a reason for cracks in the cylinder. If the cylinder head and cylinder block are not maintained properly, this could result in corrosion or rust and cause them to expand at a higher rate than they ought to. This could lead to cracks in the future.

If your uPVC window or door lock is brittle and requires a lot more pressure to turn it could be due to a variety of causes. A malfunctioning locking mechanism, misalignment, or the wear of the handle are typical reasons for this issue.

This is a straightforward and inexpensive fix that most double glazing owners can accomplish. A professional locksmith will usually be able to solve this issue within a matter of hours after arriving at your residence. Depending on the needs of your home, they can replace the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to provide you with a recommendation on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star euro cylinders TS007 that give you an additional layer of security against burglars. It is a small cost to enjoy the peace of mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks have intricate mechanisms that deteriorate with time and use, so it's not a surprise that they can break. It isn't easy to determine the cause of the problem and then fix it properly.


The issue could be with the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you stop draughts. When you aren't doing it right, replacing or repairing your handle can be costly and may harm the door's frame as well as lock It is therefore worth taking some time to make sure you do it right.

Screwdriver When the window is open remove the screw that holds the handle. This should be located on the inside face of the back plate, and is normally concealed by an attractive cover for the screw for aesthetic reasons. You should not lose any internal components of the handle like the plates and levers on either side. Keep them in the same arrangement to make it easier to replace if necessary.

Then, using another screwdriver, loosen the screw that holds the handle to the spindle in the back. Once the screw is loose, you should be in a position to pull the handle off and pull out the broken spindle. Replace it with a brand new one, making sure it's the same size as the previous one (you can usually find these on the internet or at hardware stores) and screw it securely in place. Be careful not to overtighten because this could cause damage to the handle or the window frame.

Close the handle and test it. It should work smoothly and you'll be able to open your windows once again.

While you're working on the handle, be sure to ensure that your uPVC windows are closing properly. If they're not closing properly cause draughts and damp in your home as and also affecting the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges of the window frames to ensure they close properly.

Broken Spindle

It is quite common that the spindle inside a handle breaks rather than the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that operates an electronic locking mechanism within the frame of the window. The handle is connected to a central rod which in turn activates cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle has broken and this could be an extremely frustrating issue.

There are ways to fix this problem. A good locksmith can quickly and efficiently solve the issue. A good locksmith will be able disassemble the handle of the window by using a tool to take out the wheel portion that houses the spindle. This can be done without causing any damage to the handle or causing other damage to the window frame.

Once the wheel is removed, the technician will inspect the spindle and determine what caused it to break. This involves breaking down the spindle into its individual components and carefully observing their general condition as in addition to any specific areas of wear or damage. This procedure is typically performed by technicians in a clean environment.

The next step is to clean the damaged spindle. This helps eliminate any dirt or other debris that might be hindering its normal functioning. The spindle may be repaired or replaced. If it is replaced, the technician could use an identical dowel size to the original and drill mating holes into both parts of the spindle. This ensures that the new spindle has a precise fit with the handle.

If the damaged spindle can't be repaired, it could need to be replaced entirely. Home centers sell generic replacements, but if your window design is unusual you'll need to contact a cabinet maker or woodworker who can make the exact piece. Once the new spindle is installed, it can be attached to the handle by line up the screw holes in the handle with the frame's existing screws. Once the handle is securely set, you are able to operate your uPVC windows.

Homepage: https://www.repairmywindowsanddoors.co.uk/oldham-windowrepair/