Notes

20 Things You Must Know About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

You'll be wasting energy when your double-glazed doors do not function properly. This can also increase the chance of burglary. Owen the Locksmith will be able to fix your door lock at a reasonable cost.

Snapped Key

If a key breaks inside the lock, it can be incredibly annoying. This can also be a security issue because it could leave you vulnerable to a burglar if the door does not lock. Fortunately, there are quick fixes that you can try to resolve the issue and get your door working correctly.

First, remember to stay calm. If you panic and start poking around wildly, you might just end up pushing the broken piece of the key further into the lock, thereby making the situation much worse.

Spray WD-40 or another penetrating lubricant, into the lock. This will allow the broken piece to emerge more easily. You can also use a screwdriver to help break pieces that could be hindering the flow. If you have a part of the key that is stuck and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges that can be used as a hook extractor, and some jigsaw blades are also suitable for this function. If you do not have any of these handy, you can use needle-nose pliers that bend to create a hook. Finally, a pair of tweezers is a good way to grasp and pull out the remaining piece of the key that was broken.

If you can't get the broken piece of the key out, try using a lock de-icer. This is usually available at most hardware stores. It works by freezing any moisture or ice that might be in the lock.

If none of these tricks seem to be helping then it's probably time to call a locksmith. Fitlocks experts can solve problems like broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure double glazing door mechanisms to ensure that they are more easy to operate. You can schedule an appointment online for a double-glazing repair or contact us to discuss your requirements.

Broken Cylinder

A broken cylinder is a serious security threat. A professional locksmith is able to fix the cylinder. Locksmiths will need to tap the cylinder in order to repair it. This can be accomplished with a hammer or other tool. However, the best method is to employ a wire or long match. Position the match or the wire end near the keyway. The locksmith will then strike the lock to crack it. This is more secure than using a hammer, which can damage the lock.

The most frequent cause for cylinder head cracks is overheating. This can occur when the block and the cylinder head are made of different metals such as cast-iron and aluminium. Different metals can heat up and cool down at different rates. This could cause localized hotspots to expand faster than the rest.

Another possible cause of cracks in the cylinder is corrosion. When the cylinder head and the cylinder block aren't properly maintained, this can result in corrosion or rust, which may cause them to expand at a greater rates than they should. This can cause cracks as time passes.

If your uPVC window lock or door is stiff or requires a lot of pressure to turn, this can be the result of a number of things. A defective locking mechanism, misalignment or an old handle are the most common causes of this issue.

It is a quick and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will usually solve the issue within one hour of arriving at your property. They can fix the locking mechanisms, or change the window handles and replace the gearboxes, depending on your particular requirements. A skilled locksmith will always be able to provide you with a recommendation on the most cost-effective solutions for your home. They can even recommend upgrades to 3 Star security euro cylinders TS007 that provide an extra layer of security against burglars. It's a small price to enjoy the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle


Window handle locks have complex mechanisms that wear out as time passes and use, so it's not a surprise they occasionally break. It isn't easy to determine the reason behind a broken window handle lock and then fix it properly.

The issue could be with the internal locking mechanism or the latch, fixing the broken handle will improve your uPVC double glazing door's security as well as help you to stop draughts. It can be expensive to repair or replace your handle if it is not done correctly and can also harm the frame and the lock of your door.

With the window in the open position and the window open, loosen the screw holding the handle with a screwdriver. The screw should be on the inside face of the back plate, and is normally covered by an attractive cover for the screw for aesthetic reasons. Be careful not to damage any of the internal parts within the handle, for example the plates or levers on either side of the spindle. Keep them in the same order so that it is easier to replace if necessary.

Then, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw on the back of the handle that holds it to the internal spindle using a second screwdriver. Once this is released, you'll be in a position to pull the handle off and take out the broken spindle. Replace it with a brand new spindle, ensuring that it's the same length (you can find them online or in hardware stores). Screw it in place. Don't over tighten the screw as this can cause damage to the handle and window frame.

Close the handle and try it. The hope is that it will function smoothly and you'll be able to open your window once more.

Make double glazing repair near me to check that your uPVC window is shut properly when you're working with the handle. If they're not closing correctly, you could encounter damp or draughts inside your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the window frames to ensure that they shut correctly.

Broken Spindle

It is usually the case that the spindle in the handle breaks, rather than the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that acts as an locking device within the frame of the window. The handle is attached to a centre rod that is then activated by a series of cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned it is likely that the spindle has broken This can be a very frustrating issue.

There are ways to fix this problem. A professional locksmith will be able to quickly and effectively fix this issue. A reputable locksmith can disassemble the handle of the window by using a tool to take out the wheel portion that houses the spindle. This is done without causing any damage to the handle or causing other damage to the window frame.

After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves disassembling the spindle, and then examining each component part, noting any wear or damage. This procedure is usually carried out in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle. This will remove any debris or dirt that may be obstructing it from working normally. The spindle may then be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is the same size to the original. Then, he will drill matching holes into both pieces. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle cannot be repaired it may need to be replaced entirely. Home centers sell generic replacements, but if your window design is unique you'll require contacting a cabinet maker or woodworker who can make the exact part. Once the new spindle is installed, it can be positioned to the handle by line up the screw holes in the handle with the frames existing screws. Once the new handle is seated you will be ready to operate your uPVC window.

Homepage: https://www.repairmywindowsanddoors.co.uk/altrincham-windowrepair/