Notes

11 Strategies To Completely Redesign Your Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.


It's important that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock at a reasonable price.

Snapped Key

If a key breaks within a lock, it can be incredibly annoying. It also poses a security risk since the door may not lock and make you open to intrusion. Fortunately, there are some quick fixes you can attempt to fix the problem and get your door functioning correctly.

Be sure to remain calm. If you panic you could end up pushing the damaged key piece further into the lock.

Next spray WD-40 or another penetrating oil into the lock to make the broken piece slide out more easily. You can also make use of a screwdriver to break up any stuck pieces that might be blocking the way. If you happen to have a little bit of the key hanging out it, you can make use of a paperclip or other metal object with a thin surface to grab it and pull it out. Both methods work, but be careful not to push the damaged key further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't have any of these items you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grasp and pull out the remaining piece of the key that was broken.

If you can't get the broken piece of the key out, you can try using a lock de-icer. It's usually available at most hardware stores. It works by freezing any moisture or ice that might be inside the lock.

If none of these solutions work, it may be time to consult a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure double glazing door mechanisms so that they are easier to operate. You can schedule an appointment online for a double-glazing repair or call us to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose a serious security threat. A professional locksmith is able to repair the cylinder. A locksmith must tap the cylinder in order to fix it. This can be done with the hammer or other tool. However, the best method is to make use of a wire or a long match. Then, put the end of the match or wire close to the keyway. After this, the locksmith will hit the lock to break it open. This is better than using a hammer that could damage the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can occur when the cylinder block and cylinder head are made of different metals, like cast iron and aluminium. When various metals are heated and cool at different rates, it may cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.

Another possible cause of cracks in the cylinder is corrosion. If the cylinder head and cylinder block are not maintained properly, this could result in corrosion or rust, which may cause them to expand at a more than they ought to. This could lead to cracks in the future.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn, it could be due to a variety of causes. This problem can be caused by a faulty locking mechanism or misalignment, and also a worn out handle.

It is a quick and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith should be able solve this problem within an hour after arriving at your residence. They can fix the locking mechanisms, or replace the window handles, and also change the gearboxes based on your specific needs. A professional locksmith will always be able advise you on the most cost-effective options for your home. They can even recommend upgrades to high-security 3 Star TS007 euro cylinders that will add an extra layer of security against burglars. It's a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.

Broken Handle

It's not surprising that window handle locks can break. They have complex mechanisms that become less effective over time. It isn't always easy to pinpoint the reason for the problem and then fix it properly.

Fixing the broken handle, regardless of whether it's the internal locking mechanism or latch, will improve the security of your uPVC door and prevent draughts. It could be costly to replace or repair your handle if it is not done correctly and can also harm the frame and lock of your door.

Screwdriver Open the window remove the screw that holds the handle. It should be located on the inside face of the back plate, normally hidden by an aesthetically pleasing cover for the screw reasons. You should not be able to replace any internal parts of the handle such as the plates and levers on either side. Ideally, keep them in the same order so you can re-install them if needed.

Next, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle which holds it to the internal spindle with another screwdriver. Once the screw is loose, pull the handle out and remove the broken spindle. Replace it with a brand new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Screw it in place. Do not tighten the screw too much as this can cause damage to the handle and window frame.

Make sure the new handle is correctly fitted Close the window and test the handle. It should function smoothly, and you will be able to open your window once again.

Be sure to double-check that your uPVC window is shut properly when you're working with the handle. If they aren't closing correctly, you could encounter damp or draughts inside your home. You could also compromise the energy efficiency of your home. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they can shut properly.

Broken Spindle

It is often the case that the spindle within the handle breaks, rather than the handle itself. This is particularly frequent in uPVC tilt and turn windows. These types of windows require a handle which acts as a locking mechanism within the window frame. The handle is attached to a central rod which is then activated by a series of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has been damaged, this can be a very frustrating issue.

Luckily there are ways to fix this problem. A professional locksmith can quickly and effectively address this issue. double glazing repair near me can take apart the window handle using a tool to remove the wheel part of the mechanism, where the spindle goes. This is done without damaging the handle or causing any other damage to the window frame.

After removing the wheel the technician can examine the spindle and determine the cause of the break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. This procedure is usually done in a clean, well-lit room by highly skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any debris or dirt that could be hindering its normal operation. The spindle could be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the new spindle is precisely matched to the handle.

If the spindle is damaged and cannot be repaired, it could require replacement completely. Home centres sell generic replacements but if the design of your window is unique then it will be necessary to speak with a woodworker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be fitted to the handle by lining up the screw holes on the handle with the frames existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.

Homepage: https://www.repairmywindowsanddoors.co.uk/braintree-windowrepair/