Notes

Life-time cigarette smoking intake and common cancer malignancy among residents of a large occurrence city.
It would provide a new idea for environmentally friendly mid-IR photodetectors working at room temperature.Black phosphorus (BP) is a promising material for photodetectors due to its excellent and broadband photoresponse. To realize a wide application of BP in photodetection, there is a continuous eagerness for new approaches to tailor photoresponse of BP for a specific purpose, such as high sensitivity and switching of negative/positive responses. Here, we demonstrate that the ion irradiation with controllable conditions can enhance the photoresponsivity of BP for two orders compared to the pristine one, and can select the positive/negative photoresponse of the BP. The range of the tailored photoresponse covers the whole optical spectrum, ranging from the visible (532 nm) to the mid-infrared (10 μm). This work shows a pathway to modulate the photoresponse of BP, which opens new possibilities for potential photonic applications.Electrical scanning probe microscopies (SPM) use ultrasharp metallic tips to obtain nanometer spatial resolution and are a key tool for characterizing nanoscale semiconducting materials and systems. However, these tips are not passive probes; their high work functions can induce local band bending whose effects depend sensitively on the local geometry and material properties and thus are inherently difficult to quantify. We use sequential finite element simulations to first explore the magnitude and spatial distribution of charge reorganization due to tip-induced band bending (TIBB) for planar and nanostructured geometries. We demonstrate that tip-induced depletion and accumulation of carriers can be significantly modified in confined geometries such as nanowires compared to a bulk planar response. This charge reorganization is due to finite size effects that arise as the nanostructure size approaches the Debye length, with significant implications for a range of SPM techniques. We then use the reorganized charge distribution from our model to describe experimentally measured quantities, using in operando scanning microwave impedance microscopy measurements on axial p-i-n silicon nanowire devices as a specific example. By incorporating TIBB, we reveal that our experimentally observed enhancement (absence) of contrast at the p-i (i-n) junction is explained by the tip-induced accumulation (depletion) of carriers at the interface. Our results demonstrate that the inclusion of TIBB is critical for an accurate interpretation of electrical SPM measurements, and is especially important for weakly screening or low-doped materials, as well as the complex doping patterns and confined geometries commonly encountered in nanoscale systems.Biological organisms experience constantly changing environments, from sudden changes in physiology brought about by feeding, to the regular rising and setting of the Sun, to ecological changes over evolutionary timescales. Living organisms have evolved to thrive in this changing world but the general principles by which organisms shape and are shaped by time varying environments remain elusive. Our understanding is particularly poor in the intermediate regime with no separation of timescales, where the environment changes on the same timescale as the physiological or evolutionary response. Experiments to systematically characterize the response to dynamic environments are challenging since such environments are inherently high dimensional. This roadmap deals with the unique role played by time varying environments in biological phenomena across scales, from physiology to evolution, seeking to emphasize the commonalities and the challenges faced in this emerging area of research.Image segmentation for human organs is an important task for the diagnosis and treatment of diseases. Current deep learning-based methods are fully supervised and need pixel-level labels. Since the medical images are highly specialized and complex, the work of delineating pixel-level segmentation masks is very time-consuming. Weakly supervised methods are then chosen to lighten the workload, which only needs physicians to determine whether an image contains the organ regions of interest. These weakly supervised methods have a common drawback, in that they do not incorporate prior knowledge that alleviates the lack of pixel-level information for segmentation. In this work, we propose a weakly supervised method based on prior knowledge for the segmentation of human organs. The proposed method was validated on three data sets of human organ segmentation. Experimental results show that the proposed image-level supervised segmentation method outperforms several state-of-the-art methods.In the context of organ shortage for transplantation, new criteria for better organ evaluation should be investigated. Ex-Vivo Lung Perfusion (EVLP) allows extra-corporal lung re-conditioning and evaluation, under controlled parameters of the organ reperfusion and mechanical ventilation. This work reports on the interest of exhaled gas analysis during the EVLP procedure. After a one-hour cold ischemia, the endogenous gas production by an isolated lung of nitric oxide and carbon monoxide is simultaneously monitored in real time. The exhaled gas is analysed with two very sensitive and selective laser spectrometers developed upon the technique of optical-feedback cavity-enhanced absorption spectroscopy. Exhaled gas concentration measured for an ex-vivo lung is compared to the corresponding production by the whole living pig, measured before euthanasia. On-line measurements of the fraction of nitric oxide in exhaled gas (FENO) in isolated lungs are reported here for the first time, allowing to resolve the respiratory cycles. In this study, performed on 9 animals, FENO by isolated lungs range from 3.3 to 10.6 ppb with a median value of 4.4 ppb. Pairing ex-vivo lung and pig measurements allows to demonstrate a systematic increase of FENO in the ex-vivo lung as compared to the living animal, by a factor of 3 ± 1.2. Measurements of the fraction of carbon monoxide in exhaled gas (FECO) confirm levels recorded during previous studies driven to evaluate FECO as a potential marker of ischemia reperfusion injuries. FECO production by ex-vivo lungs ranges from 0.31 to 2.3 ppm with a median value of 0.8 ppm. As expected, these FECO values are lower than the production by the corresponding whole pig body, by a factor of 6.9 ± 2.7.A method is proposed to model by a generative adversarial network the distribution of particles exiting a patient during Monte Carlo simulation of emission tomography imaging devices. The resulting compact neural network is then able to generate particles exiting the patient, going towards the detectors, avoiding costly particle tracking within the patient. As a proof of concept, the method is evaluated for single photon emission computed tomography (SPECT) imaging and combined with another neural network modeling the detector response function (ARF-nn). A complete rotating SPECT acquisition can be simulated with reduced computation time compared to conventional Monte Carlo simulation. selleckchem It also allows the user to perform simulations with several imaging systems or parameters, which is useful for imaging system design.
A system for long-length intraoperative imaging is reported based on longitudinal motion of an O-arm gantry featuring a multi-slot collimator. We assess the utility of long-length tomosynthesis and the geometric accuracy of 3D image registration for surgical guidance and evaluation of long spinal constructs.

A multi-slot collimator with tilted apertures was integrated into an O-arm system for long-length imaging. The multi-slot projective geometry leads to slight view disparity in both long-length projection images (referred to as 'line scans') and tomosynthesis 'slot reconstructions' produced using a weighted-backprojection method. The radiation dose for long-length imaging was measured, and the utility of long-length, intraoperative tomosynthesis was evaluated in phantom and cadaver studies. Leveraging the depth resolution provided by parallax views, an algorithm for 3D-2D registration of the patient and surgical devices was adapted for registration with line scans and slot reconstructions. Registrationo achieve median TRE ∼2 mm and<2° from a single scan.

The multi-slot configuration provided intraoperative visualization of long spine segments, facilitating target localization, assessment of global spinal alignment, and evaluation of long surgical constructs. 3D-2D registration to long-length tomosynthesis reconstructions yielded a promising means of guidance and verification with accuracy exceeding that of 3D-2D registration to conventional radiographs.
The multi-slot configuration provided intraoperative visualization of long spine segments, facilitating target localization, assessment of global spinal alignment, and evaluation of long surgical constructs. 3D-2D registration to long-length tomosynthesis reconstructions yielded a promising means of guidance and verification with accuracy exceeding that of 3D-2D registration to conventional radiographs.During the last decade graphene-enhanced Raman spectroscopy has proven to be a powerful tool to detect and analyze minute amounts of molecules adsorbed on graphene. By using a graphene-based field-effect device the unique opportunity arises to gain a deeper insight into the coupling of molecules and graphene as graphene's Fermi level can be controlled by the transistor`s gate voltage. However, the fabrication of such a device comes with great challenges because of contaminations stemming from processing the device inevitably prevent direct adsorption of the molecules onto graphene rendering it unsuitable for field-effect controlled graphene-enhanced Raman spectroscopy measurements/experiments. In this work, we solve this problem by establishing two different fabrication procedures for such devices, both of which are in addition compatible with large area and scalable production requirements. As a first solution, selective argon cluster irradiation is shown to be an efficient way to remove resist residues after processing. We provide evidence that after the irradiation the enhancement of the molecular Raman signal can indeed be measured, demonstrating that this procedure cleans graphene's surface sufficiently enough for direct molecular adsorption. As a second solution, we have developed a novel stacking method to encapsulate the molecules in between two graphene layers to protect the underlying graphene and molecular layer from the harsh conditions during the photolithography process. This method combines the advantages of dry stacking, which leads to a perfectly clean interface, and wet stacking processes, which can easily be scaled up for large area processing. Both approaches yield working graphene transistors with strong molecular Raman signals stemming from cobalt octaehtylporphyrin, a promising and prototypical candidate for spintronic applications, and are therefore suitable for graphene based molecular sensing applications.Exosomes contain cargoes of proteins, lipids, micro-ribonucleic acids, and functional messenger RNAs, and they play a key role in cell-to-cell communication and hold valuable information about biological processes such as disease pathology. To harvest their potentials in disease diagnostics, prognostics, and therapeutics, exosome isolation is a crucial first step in providing pure and intact samples for both research and clinical purposes. Unfortunately, conventional methods for exosome separation suffer from low purity, low capture efficiency, long processing time, large sample volume requirement, the need for dedicated equipment and trained personnel, and high cost. In the last decade, microfluidic devices, especially those that incorporate nanostructures, have emerged as superior alternatives for exosome isolation and detection. In this review, we examine microfluidic platforms, dividing them into six categories based on their capture mechanisms passive-structure-based affinity, immunomagnetic-based affinity, filtration, acoustofluidics, electrokinetics, and optofluidics.
Homepage: https://www.selleckchem.com/products/sgi-110.html