Notes

Physicochemical as well as Microstructural Portrayal regarding Whey protein concentrate Movies Produced using Oxidized Ferulic/Tannic Chemicals.
Radial-cavity quartz-enhanced photoacoustic spectroscopy (RC-QEPAS) was proposed for trace gas analysis. A radial cavity with (0,0,1) resonance mode was coupled with the quartz tuning fork (QTF) to greatly enhance the QEPAS signal and facilitate the optical alignment. The coupled resonance enhancement effects of the radial cavity and QTF were analyzed theoretically and researched experimentally. With an optimized radial cavity, the detection sensitivity of QEPAS was enhanced by >1 order of magnitude. The RC-QEPAS makes the acoustic detection module more compact and optical alignment comparable with a bare QFT, benefiting the usage of light sources with poor beam quality.A novel mid-infrared (MIR) laser crystal Co/ErPbF2 was successfully grown. The use of Er3+ ion co-doping to sensitize a Co2+ ion and enhance the 2.1-4.2 µm broadband MIR emission of the Co2+ ion in a PbF2 crystal was studied for the first time, to the best of our knowledge. The Er3+ ion was demonstrated to be an effective sensitizer of the Co2+ ion, making the Co/ErPbF2 crystal propitious to be pumped by commercialized laser diodes. Furthermore, with Er3+ ion co-doping, the local symmetry of Co2+ and Er3+ ions was seriously distorted, thereby enhancing the 2.1-4.2 µm MIR emissions. This study provides a path for designing MIR laser materials with optimal performance.Optical binding of microparticles offers a versatile playground for investigating the optomechanics of levitated multi-particle systems. We report millimeter-range optical binding of polystyrene microparticles in hollow-core photonic crystal fiber. The first particle scatters the incident LP01 mode into several LP0n modes, creating a beat pattern that exerts a position-dependent force on the second particle. Particle binding results from the interplay of the forces created by counterpropagating beams. A femtosecond trapping laser is used so that group velocity walk-off eliminates disturbance caused by higher order modes accidentally excited at the fiber input. The inter-particle distance can be optically switched over 2 orders of magnitude (from 42 µm to 3 mm), and the bound particle pairs can be translated along the fiber by unbalancing the powers in the counterpropagating trapping beams. The frequency response of a bound particle pair is investigated at low gas pressure by driving with an intensity-modulated control beam. The system offers new degrees of freedom for manipulating the dynamics and configurations of optically levitated microparticle arrays.Light scattering by disordered media is a ubiquitous effect. After passing through them, the light acquires a random phase, masking or destroying associated information. Filtering this random phase is of paramount importance to many applications, such as sensing, imaging, and optical communication, to cite a few, and it is commonly achieved through computationally extensive post-processing using statistical correlation. In this work, we show that mixing noisy optical modes of various complexity in a second-order nonlinear medium can be used for efficient and straightforward filtering of a random wavefront under sum-frequency generation processes without utilizing correlation-based calculations.In this study, we demonstrate a compact vectorial optical field generator for any coherent light, including femtosecond laser beams. The apparatus utilizes a single Köster prism for both beam splitting and recombining. A phase-only spatial light modulator is used as a diffractive optical element to encode the two complex fields that recombine after being converted to orthogonal polarizations, generating an arbitrary vectorial optical field. We apply this setup to shape focused femtosecond pulses in producing patterned structures.The terahertz (THz) band, which corresponds to intermolecular binding energy, is the key to achieving a nonlabeled biosensor. To realize high-sensitivity binding detection, we focused on surface plasmon resonance (SPR) in the THz range. Using THz-SPR enhanced a in topological insulator, we expect to observe the synergistic effects of two resonance phenomena, namely intermolecular vibrational resonance and SPR. In this Letter, we report the nonlabeled detection of biomolecular binding by the topological insulator THz-SPR. Bi2Se3 was processed in a microribbon array to enhance the SPR in the THz range. The avidin-biotin specific binding, which is similar to the antigen-antibody reaction mechanism and has powerful interactions, was observed owing to enhancement by Bi2Se3 THz-SPR. This work paves the way for a system to directly measure specific molecular bonds using topological insulators.The vacuum ultraviolet (VUV) radiation is generated in the strong-field-ionized CO molecules through 2+1 resonance excitation with two-color femtosecond laser pulses. When scanning the relative delay between two pump pulses, the rotational-resolved VUV radiations show periodic oscillations lasting as long as 500 ps. Fourier analysis reveals that these oscillations correspond to rotational beat frequencies of the A2Πi state of CO+, which is the result of multi-channel interference during the resonant excitation process. High resolution of Fourier transform spectra up to 0.067cm-1 allows us to obtain the fine energy levels of the A2Πi state. The theoretical calculation is in good agreement with the experimental observation. This work reveals the rotational coherence of the ionic excited state and shows the prospect of rotational coherence spectroscopy in measuring fine structures of molecular ions.We propose a deep subwavelength plasmonic cavity based on a metal-coated coaxial structure with Ge0.9Sn0.1 as the active medium. A fundamental surface plasmon polariton mode is strongly confined on the sidewall of the metal core, with the quality factor up to 5×103 at 10 K. By reducing the cavity dimension to a few nanometers, this cavity mode shows a strong plasmon binding with the mode volume down to 8×10-10 (λ/n)3, and significant size-dependent damping caused by the non-local optical response. The Purcell factor is achieved as high as 2×109 at 10 K and 7×108 at 300 K. This cavity design provides a systematic guideline of scaling down the cavity size and enhancing the Purcell factor. Our theoretical demonstration and understanding of the subwavelength plasmonic cavity represent a significant step toward the large-scale integration of on-chip lasers with a low threshold.Micro motion estimation has important applications in various fields such as microfluidic particle detection and biomedical cell imaging. Conventional methods analyze the motion from intensity images captured using frame-based imaging sensors such as the complementary metal-oxide semiconductor (CMOS) and the charge-coupled device (CCD). Recently, event-based sensors have evolved with the special capability to record asynchronous light changes with high dynamic range, high temporal resolution, low latency, and no motion blur. In this Letter, we explore the potential of using the event sensor to estimate the micro motion based on the laser speckle correlation technique.For the design of achromatic metalenses, one key challenge is to accurately realize the wavelength dependent phase profile. Because of the demand of tremendous simulations, traditional methods are laborious and time consuming. Here, a novel deep neural network (DNN) is proposed and applied to the achromatic metalens design, which turns complex design processes into regression tasks through fitting the target phase curves. During training, x-y projection pairs are put forward to solve the phase jump problem, and some additional phase curves are manually generated to optimize the DNN performance. To demonstrate the validity of our DNN, two achromatic metalenses in the near-infrared region are designed and simulated. Their average focal length shifts are 2.6% and 1.7%, while their average relative focusing efficiencies reach 59.18% and 77.88%.The barrier layer in InAs/GaSb LWIR nBn detector is usually composed of AlGaSb alloy, which has a non-negligible valence band offset and is sensitive to chemical solutions. In this work, we investigated a type-II superlattice (T2SL) barrier that is homogeneous with the T2SL absorber layer in order to resolve these drawbacks of the AlGaSb barrier. The lattice mismatch of the T2SL barrier was smaller than that of the AlGaSb barrier. CDK inhibitors in clinical trials At -70mV and 80 K, the dark current density and the noise equivalent temperature difference of the nBn devices with the T2SL barrier were 4.4×10-6A/cm2 and 33 mK, respectively.We propose and experimentally demonstrate a high-order coupled-resonator optical waveguide (CROW) nanobeam filter with semi-symmetrical Fano resonance enhancement. Thanks to the tight arrangement of multiple nanobeams and assistance of the partial transmission element, the designed filter has a high-contrast transmission and low insertion loss. Finally, the fabricated filter has a compact size of 20µm×10µm, a high extinction ratio as much as 70 dB, and an insertion loss as low as 1 dB. This filter shows a passive structure without thermal control configuration for calibration on each resonator. This compact filter can be a basic building block for various applications requiring high extinction ratio filtering, such as single-photon source filtering of integrated photon chips.We originally report the use of a neural network-based method for diagnosing multiple key parameters in axis-symmetric laminar sooting flames. A Bayesian optimized back propagation neural network (BPNN) is developed and applied to flame luminosity to predict the planar distribution of soot volume fraction, temperature, and primary particle diameter. The feasibility and robustness of this approach are firstly assessed using numerical modeling results and then further validated with experimental results of a series of laminar diffusion sooting flames. This proposed BPNN model-based flame luminosity approach shows high prediction accuracies, typically up to 114 K, 0.25 ppm, and 2.56 nm for soot temperature, volume fraction, and primary particle diameter, respectively. We believe that the present machine learning-assisted optical diagnostics paves a more efficient, lower costing, and high-fidelity way for multi-parameters simultaneous diagnosis in combustion and reacting flows.We report an efficient diode-pumped high-power cryogenic regenerative amplifier operating at 1019 nm employing the c axis of YbYLF. Compared to the usually selected 1017 nm transition of the a axis, the c-axis 1019 nm line has a three-fold higher emission cross section and still possesses a full-width at half-maximum (FWHM) of 6.5 nm at 125 K. The chirped-pulse amplifier system is seeded by a fiber front-end with energy of 30 nJ and a stretched pulse width of 2 ns. In regenerative amplification studies, using the advantage of higher gain in the c axis, we have achieved record average powers up to 370 W with an extraction efficiency of 78% at a 50 kHz repetition rate. The output pulses were centered on 1019.15 nm with a FWHM bandwidth of 1.25 nm, which supports sub-1.5 ps pulse durations. The output beam maintained a TEM00 beam profile at output power levels below 250 W with an M2 below 1.2. Above this power level, the thermally induced lensing in YbYLF created a multimode output beam. The thermal lens was rather dynamic and deteriorated the system stability above a 250 W average power level.
Here's my website: https://www.selleckchem.com/CDK.html