Notes

11 "Faux Pas" That Are Actually Okay To Do With Your Upvc Window Replacement Hinges
Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window replacement hinges isn't as complicated as you think. It is essential to verify that the arrows on the hinges are facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are several different types of hinges, each with their distinct characteristics. This article will focus on the most commonly used kinds of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

They are a great option to replace or upgrade windows for fire escapes since they can be opened at a 90-degree angle. They can also be disengaged to an 'easy clean' position so that you can easily access the outside of your windows to clean them without the need to climb an overhang or climb a ladder at angles that could be dangerous.

These heavy duty egress hinges are manufactured by Yale one of the most known and trusted home security brands available today. They can be used with all kinds of uPVC side-hung windows. By pressing a small button, the window sash can be slid to the side and into the position that is easy to clean. After closing, the sash will automatically reset to its original operative position.

Both 13mm and 17mm are both available. Based on the size of your existing window, we suggest using our Egress Selection Guide to determine the best product for you.

These hinges are compatible with standard side-hung frames made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the chance of an accidental closure during high winds. They have been tested to more than 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

Without buttons or catches, The Nico Egress Easy Clean Friction Hinge is simple to operate and offers a practical solution for emergency egress and safe cleaning. First, open the window to the egress (full opening) position and then press the hinge retaining clip on the inside of the bottom corner. This will open the top and bottom catches which will allow you to slide the sash into an easy-clean position. Once it is in the easy-clean position close the window to reset the hinges back to their original position.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as "Easy Clean" hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. These types of window hinges are more spacious and more efficient than conventional hinges to provide an expansive clear opening for escape in the event of an emergency fire. The building regulations state that this type of hinge should be placed in any room that has a window.

They feature a unique friction stay that allows the window to open at a 90 degree angle and also allows the sash opening to slide across when it is open to make it easy to clean the exterior side of the glass, without having to climb ladders. The hinges aren't flimsy buttons or catches and operate with a simple, secure lever that can be accessed from inside the home.

The hinges are made in the UK by Cotswold and come complete with a child safety limiter for day-to-day use that can be reverted with a hidden button giving you peace of mind that your children won't accidentally open the window too far. The stack heights are 13mm or 17mm.

Find the length of the current side-hung window hinge that is fixed to the frame. (See the guide for measuring upvc window hinges). Then, select the appropriate size hinge from the options below.

Note that this measurement is taken at the part of the hinge that connects to the frame, not the sash. The actual hinge length can be longer or shorter depending on the way your windows were made in the past. When choosing the size of the hinge, the majority of frames made of upvc can accommodate the 13mm stack height however if your original window frame has 17mm, then select this option. Alternatively you can fit the 4mm packer to make up for the difference. All hinges are supplied in pairs (1 left and 1 right). Screws aren't included with the hinges. If needed, they can be purchased separately. We suggest using our upvc window hinge repair screws. They are specifically made to improve the performance of your hinges and allow them to function smoothly for longer. They have a reduced-friction design and a heightened weather seal with a nylon reducer cap.

Restricted Hinge

There are occasions windows need to open fully and this can be a challenge using hinges that are standard. These child safety hinges can help overcome this issue and are a great solution for situations where ventilation is required but access for cleaning or escape in the event of fire isn't possible. They limit the possibility of opening the sash, and allow for the bypass of this limitation by pressing the button. They can be used for top and side hung windows and are available in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinges blend the features of both the standard restrictor, as well as an escape pivot to provide a simple but efficient method of complying with building regulations. It is suitable for both side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available as a pair of hinges where one hinge is the restricted egress, the other unrestricted allowing one of these to be fitted on the bottom of the sash while the other is fitted to the top.

These uPVC restricting hinges have been tested to BS6375, part 2 and are designed for use on a window that cannot be fully opened like a small child's bedroom. The mechanism restricts the distance the sash can open to 100mm in a safe distance and then re-engages when the window is shut.

These uPVC friction-type hinges can be used with all types of windows. They are particularly useful for windows that are difficult to reach, such as those in three-storey apartments or those which would require a ladder. They can be complemented with our selection of security features like hinge guards, protection plates for hinges or dog bolts to provide PAS 24 performance.

It is important to measure your existing window hinge in order to get replacements of the same size. repair window hinges to accomplish this is by looking at the hinge in the image gallery and working out the best place for it to be. Top-hung hinges are limited to both sides and side hung hinges can only be used to one side.

Standard Hinge


Standard hinges use metal-to-metal connections and don't require additional parts to help reduce friction. It is available in a variety of finishes and is also fire-rated. To quickly determine the radius of hinges, lay it out flat and align a quarter and dime in two corners. If the quarter fits better, then the corner should be turned to 5/8 inches.

The hinge you choose can enhance or break the look of your door. Matching the style and finish of your hinges to your door will give it an attractive and well-integrated look.

My Website: https://www.repairmywindowsanddoors.co.uk/christchurch-window-hinge-repairs-near-me/