Notes

15 Undeniable Reasons To Love Fix Door Hinge
How to Fix a Loose Door Hinge

The majority of homeowners can fix a loose hinge. If, however, the screw holes are stripped and aren't able to hold screws, you may need to put in dowels and wood glue before you can put back the hinge.

Before you do that, however you should clean off any surface corrosion. This will help the dowels remain in place and provide them a solid base to grip into.

Take off the Hinges

Many standard door hinges can be removed, which makes it easier to move the door from one side to another or to remove the entire door off of the frame, if needed. It is simple for anyone with patience, though you do need to know how to do it properly.

If the hinges are painted, you'll need to get rid of the paint before attempting to remove the pins. You may scratch your door if don't take off the paint. Place the hinges into a stainless steel pot and fill it with water until the hinges are submerged. The hinges should rest in the pan for 30 minutes. The heat from the water should soften the paint and make it easier to remove the pins.

Once the pins are removed, take the hinges and frame from the door. You can use a screwdriver to get the job done, however it is recommended that you use a magnetic screwdriver for this task. This type of screwdriver is designed to pick up screws made of metal and can make the work run much more quickly.

It is a good practice to spray lubricant onto the hinges prior to trying to remove them. A simple lubricant can help you move the process along faster and make the removal of pins and screws more easily. This kind of lubricant is able to be found in most hardware stores as well as home improvement shops.

It is important to keep in mind that the number of door hinges you'll require will differ based on the door's type and its configurations. Doors with solid cores and heavy weights will require more hinges while hollow-cored and lighter doors might only need two or three.

It is also important to understand the different types of hinges so you can determine which ones will best suit your needs. Exterior hinges are designed to support the weight of a door, while interior hinges need to be able to handle heavier loads.

Reattaching the Hinges

Sometimes, a hinge on a door will get looser and eventually begin to hang crookedly or sag. This can be a major issue, but the solution is usually easy. Retightening the screw will typically resolve the issue. However, if the screw holes have been stripped out, this can be more difficult. A dowel made of wood can be used to tighten the holes once more.

Start by drilling the old hole using a drill bit close to the size of the new screw (normally 3/8"). Then use a wood glue and a dowel made of wood to fill the hole. The dowel should be cut to a length that is similar to the screw to ensure a snug fit. Install the screw again, and tighten to desired level of tightness. If the door is still unable to be bounded up, insert a second dowel to the gap. Repeat the procedure. Be sure to close the door slowly so that you can examine the clearances around the perimeter after each adjustment.

Another option is to make use of a wood plug instead of a dowel. It works just as well but might take a little longer to put in. Simply whittle a chunk of wood to the right size for a snug fit, and then insert it into the hole. If you don't own an instrument for woodworking or toothpicks, you can make use of toothpicks or matchsticks made of wood.

Use a countersink to make the hole smaller for the head of the screw after you have installed it. This will prevent the screw from rubbing against the edge of the doors as they are opened and closed. This will aid in tightening the screw when you are reinstalling the hinge.

Once you have reinstalled the hinge, be sure to lubricate it using a dry lubricant to ensure that it doesn't get stuck in the future. Products like PB Blaster or Liquid Wrench are excellent alternatives. Apply a thin layer and allow it to soak into the barrel of the hinge for approximately 15 minutes.

Refinishing the Hinges

If you're not ready to replace the hinges on your door, you could do a few simple repairs. The first step is to ensure whether the screws that secure the hinge plate to the frame and door are tight. If they're loose, tighten them with a screwdriver or power drill. Be careful not to tighten your screws so much that they start to create gaps in the trim joints or, even more damagingly remove the threads.

If the issue is that the hinge plates are splitting and you want to reattach the plates by applying wood glue on the side of them and inserting toothpicks or wooden dowels into the holes. The toothpicks or dowels will provide a solid base for the screws and prevent the plates from shifting when you drive them into place. Allow the glue to dry before attaching the hinge.

The screws may also be damaged or missing. It is possible to fix this issue by replacing the screws with longer ones. Make sure you use the correct drill bit for the size of the screw hole to avoid drilling into other parts of the jamb or hinge.

Close the door once you've reattached the hinge and examine the gap between the frame and the door. The gap should be the thickness of a penny all around or less if the old door was not hung correctly. If the hinges were put in place properly, this shouldn't be a problem.

If you notice that the hinges are still loose, try putting a thicker hinge shim between the hinge plate and the mounting surface to give some extra space. You can also remove the hinge pin and pound it down with a heavy hammer to tighten it up or choose a new hinge. You can also lubricate your hinges with mineral oil or jojoba to reduce friction and hold them in their place. Lubricating your hinges regularly will help keep them from becoming stiff and squeaky, and can also prolong their life.

Cleaning the Hinges

The friction generated by the hinge's constant motion attracts dust particles. These particles can become stuck and accumulate in the moving parts of door hinges if they're not maintained and cleaned regularly. As a result the hinge can become stiff and creaky and its appearance may get worse. Regular cleaning, lubrication, and inspection will preserve the integrity and functionality of hinges that are attached to doors.

Check the hinges for the accumulation of rust. If the rust has corroded to the point of destroying surface of the hinge barrel or screw holes, you will have to replace the hinges. If you're able to save the hinges, you can remove any loose rust using wire brush and steel wool. Apply a commercial rust-removing product or a homemade solution such as lemon juice on the hinge. Let the rust removal solution be on the hinge for a few minutes to penetrate and dissolve any remaining rust.


The tightening of screws can restore hinge function if you don't want to spend time or money to replace hinges. It may be necessary, however, to add a wooden shim or dowel to the hinge when the screws have been shaved. Dowels made of wood are round pieces of wood that are in the form of rods, which are available in varying lengths and sizes. You can find them at home improvement centers or woodworking supply shops, or online.

You can also create an shim out of either plastic or metal, depending on the type hinge you are using. To make a dowel cut a piece of wood dowel or another sturdy material to the size you want. You can then dip a dowel into the adhesive of a carpenter and insert it in the hole. The glue will hold the dowel securely in the position.

Before cleaning upvc door hinge repair near me , lay down a cloth or towel to protect your flooring from spills. Once the area is protected and dry, clean the hinges with a soft cloth or sponge dipped in a mild cleaner or vinegar to get rid of dirt, grime, and tarnish. You can make use of a toothbrush or a small brush to reach difficult-to-reach places in crevices and tight areas.

Here's my website: https://www.repairmywindowsanddoors.co.uk/bristol-door-hinge-repairs-near-me/