Notes

Oxidation of much needed mercury simply by revised invested TiO2-based SCR-DeNOx reasons throughout simulated coal-fired flue gas.
Solid-state batteries are seen as a possible revolutionary technology, with increased safety and energy density compared to their liquid-electrolyte-based counterparts. Composite polymer/ceramic electrolytes are candidates of interest to develop a reliable solid-state battery due to the potential synergy between the organic (softness ensuring good interfaces) and inorganic (high ionic transport) material properties. Multilayers made of a polymer/ceramic/polymer assembly are model composite electrolytes to investigate ionic charge transport and transfer. Here, multilayer systems are thoroughly studied by electrochemical impedance spectroscopy (EIS) using poly(ethylene oxide) (PEO)-based polymer electrolytes and a NaSICON-based ceramic electrolyte. The EIS methodology allows the decomposition of the total polarization resistance (Rp) of the multilayer cell as being the sum of bulk electrolyte (migration, Rel), interfacial charge transfer (Rct), and diffusion resistance (Rdif), i.e., Rp = Rel + Rct + Rdif. The phenomena associated with Rel, Rct, and Rdif are well decoupled in frequencies, and none of the contributions is blocking for ionic transport. In addition, straightforward models to deduce Rel, Rdif, and t+ (cationic transference number) of the multilayer based on the transport properties of the polymer and ceramic electrolytes are proposed. A kinetic model based on the Butler-Volmer framework is also presented to model Rct and its dependency with the polymer electrolyte salt concentration (CLi+). Interestingly, the polymer/ceramic interfacial capacitance is found to be independent of CLi+.Alkylation of aromatic hydrocarbons is among the most industrially important reactions, employing acid catalysts such as AlCl3, H2SO4, HF, or H3PO4. However, these catalysts present severe drawbacks, such as low selectivity and high corrosiveness. Taking advantage of the intrinsic high acid strength and Lewis and Brønsted acidity of niobium oxide, we have designed the first series of Nb2O5-SiO2(HIPE) monolithic catalysts bearing multiscale porosity through the integration of a sol-gel process and the physical chemistry of complex fluids. The MUB-105 series offers efficient solvent-free heterogeneous catalysis toward Friedel-Crafts monoalkylation and -acylation reactions, where 100% conversion has been reached at 140 °C while cycling. Alkylation reactions employing the MUB-105(1) catalyst have a maximum turnover number (TON) of 104 and a turnover frequency (TOF) of 9 h-1, whereas for acylation, MUB-105(1) and MUB-105(2) yield maximum TON and TOF values of 107 and 11 h-1, respectively. Moreover, the catalysts are selective, producing equal amounts of ortho- and para-substituted alkylated products and greater than 90% of the para-substituted acylated product. The highest catalytic efficiencies are obtained for the MUB-105(1) catalyst, bearing the smallest Nb2O5 particle sizes, lowest Nb2O5 content, and the highest amorphous character. The catalysts presented here are in a monolithic self-standing state, offering easy handling, reusability, and separation from the final products.Low-abundance biomarker amplification detection systems have been widely used to detect miRNAs; however, "always active" systems are insufficient for high spatial and temporal control of miRNAs. Here, we constructed a light-activated nanodevice (LAN) based on DNA nanotechnology for high spatial and temporal precision detection of low-abundance miRNA. Light-activated hairpin probes and triple-helix molecular switches were modified on the surface of gold nanoparticles (AuNPs) to trigger miRNA on-demand imaging analysis by UV light activation. In the presence of both UV light and miRNA, the LAN releases hairpin DNA and completes the hybridization chain reaction (HCR) with the conformation-altered triple-helix molecular switch, enabling fluorescence imaging of low-abundance miRNAs in living cells. The current work provides an opportunity to develop light-activated signal amplification sensors that can accurately image miRNAs on-demand in both temporal and spatial dimensions.Semiconducting polymer dots (Pdots) are increasingly used in biomedical applications due to their extreme single-particle brightness, which results from their large absorption cross section (σ). However, the quantum yield (Φ) of Pdots is typically below 40% due to aggregation-induced self-quenching. One approach to reducing self-quenching is to use FRET between the donor (D) and acceptor (A) groups within a Pdot; however, Φ values of FRET-based Pdots remain low. Here, we demonstrate an approach to achieve ultrabright FRET-based Pdots with simultaneously high σ and Φ. The importance of self-quenching was revealed in a non-FRET Pdot adding 30 mol % of a nonabsorbing polyphenyl to a poly(9,9-dioctylfluorene) (PFO) Pdot increased Φ from 13.4 to 71.2%, yielding an ultrabright blue-emitting Pdot. We optimized the brightness of FRET-based Pdots by exploring different D/A combinations and ratios with PFO and poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-phenylene)] (PFP) as donor polymers and poly[(9,9-dioctyl-2,7-divunt of FRET acceptor polymer with a large donor-acceptor spectral overlap can be generalized to produce ultrabright Pdots with emissions that span the visible spectrum.Negative thermal expansion (NTE), referring to the lattice contraction upon heating, has been an attractive topic of solid-state chemistry and functional materials. The response of a lattice to the temperature field is deeply rooted in its structural features and is inseparable from the physical properties. For the past 30 years, great efforts have been made to search for NTE compounds and control NTE performance. The demands of different applications give rise to the prominent development of new NTE systems covering multifarious chemical substances and many preparation routes. Even so, the intelligent design of NTE structures and efficient tailoring for lattice thermal expansion are still challenging. However, the diverse chemical routes to synthesize target compounds with featured structures provide a large number of strategies to achieve the desirable NTE behaviors with related properties. The chemical diversity is reflected in the wide regulating scale, flexible ways of introduction, and abundant structure-function insights. It inspires the rapid growth of new functional NTE compounds and understanding of the physical origins. In this review, we provide a systematic overview of the recent progress of chemical diversity in the tailoring of NTE. The efficient control of lattice and deep structural deciphering are carefully discussed. This comprehensive summary and perspective for chemical diversity are helpful to promote the creation of functional zero-thermal-expansion (ZTE) compounds and the practical utilization of NTE.Tandem-repeat proteins comprise small secondary structure motifs that stack to form one-dimensional arrays with distinctive mechanical properties that are proposed to direct their cellular functions. Here, we use single-molecule optical tweezers to study the folding of consensus-designed tetratricopeptide repeats (CTPRs), superhelical arrays of short helix-turn-helix motifs. We find that CTPRs display a spring-like mechanical response in which individual repeats undergo rapid equilibrium fluctuations between partially folded and unfolded conformations. We rationalize the force response using Ising models and dissect the folding pathway of CTPRs under mechanical load, revealing how the repeat arrays form from the center toward both termini simultaneously. Most strikingly, we also directly observe the protein's superhelical tertiary structure in the force signal. Using protein engineering, crystallography, and single-molecule experiments, we show that the superhelical geometry can be altered by carefully placed amino acid substitutions, and we examine how these sequence changes affect intrinsic repeat stability and inter-repeat coupling. Our findings provide the means to dissect and modulate repeat-protein stability and dynamics, which will be essential for researchers to understand the function of natural repeat proteins and to exploit artificial repeats proteins in nanotechnology and biomedical applications.A hyphenated strategy for photoelectrochemical (PEC) disinfection is proposed with rationally designed black TiO2-x as a photoresponsive material. The PEC method, a fusion of electrochemistry and photocatalysis, is an innovative and effective way to improve photocatalytic performance, which imparts certain properties to the photoelectrode and greatly promotes the charge transfer, thus effectively inhibiting the recombination of carriers and greatly promoting the catalytic efficiency. The oxygen vacancy (Vo) engineering on TiO2 is conducted to obtain black TiO2-x, which shows a much larger light absorption region in the full solar spectrum than the pristine white TiO2 and presents excellent PEC sterilization performance. The bactericidal efficiency with the PEC method is 10 times higher than that with the photocatalytic method, inactivating 99% of bacteria within a short time of 30 min. In addition, the black titanium oxide nanowires (B-TiO2-x NWs) are grown on flexible carbon cloth (CC) to form a sandwich structural self-cleaning face mask. The bacteria adhering to the surface of the mask will be sterilized quickly and efficiently under the illumination of visible light. The face mask with the characteristics of superior antibacterial effect and long service lifetime will be used for epidemic prevention and reduce the second pollution.The HIV-Ι trans-activation responsive (TAR) RNA-trans-activator of transcription (Tat) protein complex is crucial for the efficient transcription of the integrated human immunodeficiency virus-I genome and is an established therapeutic target for AIDS diagnosis and treatment. Developing a sensitive strategy for the TAR RNA-binding ligand assay could provide antiviral leads with a radically new mechanism for the treatment of AIDS. Herein, a new TAR RNA-binding ligand assay platform was established using a signal amplification strategy that combines aggregation-induced emission (AIE) with a metal-enhanced fluorescence (MEF) concept. check details The tetraphenylethylene (TPE) derivative was labeled on the Tat peptide as a fluorescent molecule, while the TAR RNA was immobilized on the surface of the Fe3O4@Au@Ag@SiO2 nanoparticles (NPs) to specifically bind the TPE-Tat peptide. The TPE-Tat peptide was weakly emissive itself while emitting strongly in the NP-TAR-TPE-Tat complex by the AIE and MEF signal amplification effect. It was confirmed by known Tat peptide competitors that this system could be applied to the screening and detection of TAR RNA-binding ligands because they could replace the TPE-Tat peptide from the complex and make the system fluorescence decrease. When this system was adopted to test four candidate ligands, it was found that bisantrene had a favorable TAR RNA-binding ability. The proposed AIE-MEF strategy not only provides a sensitive and reliable method for the TAR RNA-binding ligand assay but also can avoid the influence of ligands on fluorescent detection in the conventional displacement assay.
My Website: https://www.selleckchem.com/products/nps-2143.html