Notes

10 Fundamentals Regarding Upvc Window Replacement Hinges You Didn't Learn In The Classroom
Choosing Upvc Window Replacement Hinges

It's not as difficult as it could appear to select and install the replacement hinges made of upvc. Check that the arrows on the hinges are facing the correct direction and determine the thickness of the hinge arms on the frame that opens (13mm or 17mm).

There are several different types of hinges, each with their own unique features. This article will review some of the most common uPVC hinges and their benefits.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape safety windows because they can open to a full 90-degree angle. They can be disengaged to an easy-clean position that allows you to see the windows' exterior without the need to climb ladders or lean at dangerous angles.

Yale is one of the most trusted and well-known brands in the home security industry. They can be used with all types of uPVC side-hung windows. By pressing a small button, the window sash will be slid to the side and into the clean position. When the sash is closed, it will automatically reset to its original operative position.

They are available in 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.

The hinges are designed to be used with a standard side-hung frame that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the windows simpler and less likely of accidental closing during strong winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

There are no buttons or catches There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is simple to use and provides a convenient solution for emergency egress and secure cleaning. First, open the window to the egress (full opening) position, and then press the hinge retaining clip that is located on the inner side of the bottom corner. This will open both the bottom and top catches and allow you to slide the sash to the clean position. Close the window once you are in the easy-cleaning position. This will set the hinges back to their Egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace side-opening windows for fire safety reasons. These kinds of hinges for windows are more spacious and more efficient than standard hinges to allow an expansive clear opening to escape in the case of an incident of fire. This type of hinge is required in any living space that has a window, as stipulated by building regulations.

The windows feature an elongated friction that permits them to open to a 90-degree angle. They also let the opening sash to slide across the glass when opened, allowing for simple cleaning without the need to use ladders. The hinges are easy to operate and do not have complicated buttons or catchers. They can be operated from inside of the house with a safe, simple lever.


The hinges, manufactured in the UK by Cotswold and Cotswold, have the safety of children in everyday use. This can be overridden with a hidden button. You'll be able to rest of mind knowing that your children will not accidentally open the windows too far. The stack heights are 13mm or 17mm.

Take a measurement of the length of the current side-hung window hinge, which is fixed to the frame. (See the article on measuring the size of Upvc window hinges). Select the correct size hinge from the list below.

Please note that this measurement is taken from the part of the hinge that attaches to the frame, not the sash. The actual hinge length could be shorter or longer dependent on how the windows were originally made. When choosing the width of your hinge, the majority of upvc windows can be fitted with 13mm stack height, however should your old window frame has 17mm, then select the option that fits this. You can also opt for the 4mm packer to compensate for the difference. All hinges come handed (1 left and one right). The hinges do not include screws. These can be bought separately if required. We recommend using our Upvc window hinge repair screws. These screws are designed to enhance your hinges' performance and allow them to operate efficiently for a longer. They feature a less friction design, and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These child safety hinges can help overcome this problem and offer a fantastic solution when ventilation is needed but access to clean up or escape in the case of fire isn't possible. They work by restricting the amount the sash can open, and allow for the control of this limitation with an option. They can be used for side and top-hung windows and are available in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinges blend the features of both the standard restrictor, as well as a fire escape pivot to provide a simple and efficient method of complying with building regulations. It is available in 13mm and 17mm stack heights and is suitable for the top and side openings of uPVC window. It is available in two parts that has one hinge which is the one with restricted egress and the other hinge being unrestricted. window hinge repair near me Repair My Windows And Doors allows one to be installed at the bottom while the other is set on top.

These uPVC hinges are restrictive and have been tested to BS6375 part 2 and are designed to be used on windows that cannot be fully opened like a small children's bedroom. The mechanism restricts the amount the sash can open up to 100mm for safety and re-engages once the window is closed.

These uPVC hinges with friction can be used with all types of windows. They are particularly useful for windows that are difficult to reach, such as those in three-storey homes or those that require ladders. They can be upgraded with our security features, including hinge guards, or dog bolts to attain PAS 24 performance.

It is important to measure the hinge on your current window to ensure that you get replacements that are the same size. This can be done by looking through the image gallery of the hinge and deciding where you want it positioned. Top-hung hinges are limited on both sides and the side-hung hinges are only restricted on one side.

Standard Hinge

A standard hinge is made of metal-to-metal contact and no extra components to reduce friction. It is available in a variety of finishes and fire-rated. To quickly determine the radius of a hinge, lay it out flat and align a quarter and dime in two corners. If the dime is more snug, the corner is rounded by 1/4 inch. If the quarter fit better, it's rounded to 5/8 inch.

Selecting the right hinge can be the difference between making or breaking your door's appearance. It's essential to match the finish and style of your door to the hinges to create a seamless appearance that is both functional and visually attractive.

Homepage: https://www.repairmywindowsanddoors.co.uk/southend-window-hinge-repairs-near-me/