Notes

7 Practical Tips For Making The Greatest Use Of Your Door Lock Replacement
Door Lock Replacement - What You Need to Know

If the locks on your door start to show signs of wear and tear it's an ideal time to replace them. These signs include things like experiencing difficulty turning the lock, or a key that doesn't fit.

It is good to know that installing new hardware for your door is surprisingly easy. You only need to follow these simple steps.

Deadbolt

The deadbolt on your door is the primary defense against forced entry. It is stronger and more secure than the latch that opens the lock. So, you will want to make sure that the deadbolt you choose to purchase is compatible with your requirements. If you can, opt for a deadbolt that's made with case hardened steel and no screw heads exposed on the outside to stop unauthorized drilling. The interior side of the deadbolt needs to be mortised into your door frame to improve security.


During the installation, ensure that the bolt on your new deadbolt extends smoothly through the strike plate while you shut and lock the doors. If not, mortise the bolt into the strike plate using a wood chisel and then install the deadbolt. When you close and lock your door, make sure that the latch of the doorknob is in line with the deadbolt's hole.

Before installing the new deadbolt, check that it matches the size of the previous one. Repair My Windows And Doors of door locks come with a template showing how far the bolt should be above the doorknob. However, it is always recommended to consult an expert in hardware if you are unsure what backset size you require for your doors. They will be able to direct you in the direction of models that will work with your door and the existing deadbolt opening.

After ensuring your new bolt assembly is of the correct length, insert it into the hole of the door. Screw the latch faceplate in the hole if the new deadbolt is equipped with one. It's an excellent idea to screw the latch faceplate using the recommended screws to the frame.

Some lock sets include a "dummy" or decorative bolt that allows you to install the deadbolt with a key and still have a functioning latch. If you have this option, the dummy bolt should be installed using the same screws as your faceplate for your latch, and it's important that the two bolts are positioned properly for maximum security.

Some deadbolts are accessible only through a thumb-turn and others come with two cylinders that permit both keyed and non-keyed access. No matter which type you choose, it's a good idea to purchase a commercial grade lock for the highest level of security. They're tested to withstand up to 250,000 cycles of closing and opening before being sold to homeowners.

Latch

The latch is the part that retracts the bolt when you open or close the door. It's usually secured by screws that are located on the side of the lock, but it can also be attached to the strike plate or the inside of the jamb. When replacing a door latch it is important to ensure that you purchase the correct one that matches the hardware you have. You can either put the latch against the hardware you have already installed or look up the label on the replacement. Dunn Lumber offers a wide variety of brands. However, it is recommended to select the same brand that matches the hardware you already have. This will ensure that the latch you buy will fit properly.

Some doors feature a hasp instead of a latch. A hasp is a strap with a slot punched into it that can be placed over a staple. The staple is then attached to the frame of the door or door using nails. When the door is closed the strap pulls back on the staple and locks it into the position. Commercial buildings employ a hasp because it is less expensive than the lock.

Locks are susceptible to wear and tear over time like any other mechanism that has moving parts. Sometimes, the internal mechanism could "stick" or be difficult to turn. This may require replacement of the entire lockset. Other times the exterior handle or doorknob will fail, requiring to replace it as well.

If your lock is sticking it is possible to try using some graphite in the keyhole. You can either dust or spray it onto the key, and then turn the lock a couple of times to incorporate the graphite. You can also use a screwdriver to remove the knob and reveal the inside components and allow you to observe what's happening inside.

After taking the knobs off and tightening the two or three screws at the edges of the cylinder by turning them clockwise. The faceplate needs to be removed and replaced. Surface-mounted rimlocks have an additional set cylinder setscrews on the back of the case that must be removed along with the faceplate.

Strike Plate

The strike plate is a way to strengthen and upgrade to the locking system. It is affixed to the holes that are used for deadbolts or master key systems bolts. It helps keep intruders out by making sure that the lock's latch is secured in the strike plate when the bolt or latch is engaged. A strikeplate that is of high-quality can improve the longevity of locks as well as enhance security.

Standard strike plates are flat pieces of metal with holes, or a series of holes, cut into them. It is fastened, usually by screws, to the frame of a doorway to provide the latch with a place to rest in when it closes. It is essential that the strike plate be properly aligned with the lockset to provide the best protection against burglaries.

If the strike plate of the door is damaged, you must replace it as soon as you can. This will ensure that the door will close and latch properly. The first step in replacing the strike plate is to ensure that it is aligned correctly with the bolt hole inside the doorjamb. This can be done by placing a piece adhesive tape over the bolt hole and then testing the latch. If the latch doesn't catch, you must remove the tape and chisel out the area so that the striker will be in line with the doorjamb.

After the area has been chiseled out it is essential to use a more powerful screw to fix the strike plate. They should be at least 3 inches in length in order to ensure they are securely fixed to the stud behind the trim board. If you don't install the longer screws, the wood in the doorjamb could split during a kick-in attack by a burglar and leave the door vulnerable.

A professional locksmith can quickly replace a strike plate that has become worn or damaged. They can also put an entirely new strike plate on a door that has never had one before. They can also modify existing strikeplates to enhance the security of the building and its aesthetics. This could help property owners draw in tenants seeking a secure living environment and greater peace of mind.

Keys

The key cylinder of your lock is the part that accepts the key to move pins so that the inner handle can turn. The key cylinder is also the most crucial component of your door lock since it carries out the function that locks were made to protect you, your family members and your possessions. Rekeying locks is a more economical option than replacing them.

The replacement of a lock is more complex than simply replacing the existing handle-lock combo or deadbolt. A complete change in the lock requires removing the old cylinder and hardware from the door (including the handle if you have a knob-lock combo) and putting a brand new one in its place. There are numerous DIY-friendly tools that can be used to replace a door lock. However, it's best to contact an expert locksmith to ensure that the job is done correctly.

It is essential to have the right key before you install your new lock and cylinder. A key that is a duplicate will not work properly and could cause the lock to fail completely, making it impossible to open. A professional can stop this from happening by making sure you have a a working, real key for your home.

The next step is to remove the faceplate, and then the latch plate. You will require a screwdriver to remove the screws that hold them in place. It is possible to leave them in place if the new plates are identical to the original ones. This will cut down on time. If you need to replace them, don't overtighten screws, as this can weaken their grip.

After removing the plates, you will need to determine the measurements for your new locks. Although many modern locksets will be able to fit a standard width of door, it is best to know the dimensions of your door prior to installation to avoid a headache when you arrive at the hardware store. Doorknob locksets tend to be different sizes than deadbolt locks commercial models might have a bigger latch or bolt.

Read More: https://www.repairmywindowsanddoors.co.uk/dover-door-locks-replacement-near-me/