Notes

Connection between calculated tomography angiography and also histology of carotid artery coronary artery disease: Can semi-automated image software anticipate a plaque's arrangement?
Annular-illumination quantitative phase imaging based on space-domain Kramers-Kronig relations (AIKK) is a newly developed technique that is object-independent and non-iterative reconstructed inherently. Only capturing four low-resolution images, the AIKK system gains a resolution enhancement of nearly twofold. Under matching constraints between the illumination wave vector and pupil function aperture, we set a spectrum sampling criterion and establish a spectrum effective utilization model to search for the optimal solution of spectrum distribution for the specific annular structure. In view of the square spectrum structure, a diagonal-expanded sampling based AIKK method (DES-AIKK) is presented to get rid of the pixel aliasing problem. It is worth noting that the space-bandwidth-time product (SBP-T) further increases to 439.51 megapixels (1.8× of AIKK). Our work provides the guidelines and insights for designing the most suitable AIKK platform for high-throughput microscopic applications in pathology and real-time dynamic observation.We introduce optical isolation based on reorientational solitary waves in nonuniformly oriented uniaxial soft matter, namely nematic liquid crystals. A longitudinally nonsymmetric angular distribution of the optic axis provides the system with direction-dependent routing, resulting in an all-optical diode owing to input-side sensitive steering. Numerical experiments demonstrate the phenomenon and its effectiveness in realistic samples.An ultra-broadband wavelength-swept laser (WSL) was generated using glass-clad Tisapphire crystal fiber as the gain media. Due to the low signal propagation loss of the crystal fiber, the swept laser has a tuning bandwidth of 250 nm (i.e., 683 nm to 933 nm) at a repetition rate of 1200 Hz. The steady-state and pulsed dynamics of the WSL were analyzed. The 0.018-nm instantaneous linewidth corresponds to a 3-dB coherence roll-off of 7 mm. When using the laser for swept-source optical coherence tomography, an estimated axial resolution of 1.8 µm can be achieved.Incoherent digital holography (IDH) enables the recording of holograms with incoherent light. However, there is unnatural bokeh with ringing on reconstructed 2D images, owing to the diffraction calculation based on the coherent nature of the light. Thus, we propose a transformation method that converts it into incoherent bokeh. This proposed method can generate 2D images without ringing from recorded holograms through a virtual incoherent imaging system, while focusing on the non-linearity problem of reconstruction distances in IDH. Flexible depth-of-field control is also made possible by the judicious selection of parameters in this method. A proof-of-principle demonstration verifies its feasibility.This Letter proposes a random plasmonic laser in the metal-insulator-metal (MIM) structure, in which the dielectric core with gain is dispersed with circular dielectric nanoscatterers. The numerical results from finite-difference time-domain simulation indicate that scattering by the randomly distributed dielectric nanoscatterers in the MIM waveguide provides feedback to the random laser with surface plasmon. The design bypasses the requirement of a distributed feedback structure for the plasmonic waveguide-based nanolasers, which is challenging and expensive in fabrication. Additionally, the MIM structure makes this type of random laser easily applicable to nanoscale integrated photonic devices and circuits.We demonstrate a high-sensitivity bidirectional magnetic field sensor based on a packaged optofluidic microbottle resonator (OFMBR) filled with magnetic fluid (MF). The relationship between sensitivity and different wall thicknesses and radial modes of OFMBR is theoretically analyzed. Then the thin-wall OFMBR is fabricated by etching a capillary with the fusion discharge process. The OFMBR and tapered fiber is packaged with a portable and robust coupling configuration. By applying perpendicular or parallel magnetic field directions to the OFMBR, opposite refractive index responses of the MF can be obtained, with resonant wavelengths redshifted or blueshifted as the magnetic field intensity is increased. A magnetic field sensitivity of 98.23 pm/mT can be obtained by using the second-order radial mode when the magnetic field is perpendicular to the packaged OFMBR. When the magnetic field is parallel to the packaged OFMBR, the sensitivity is -304.80 pm/mT by using the third-order radial mode and the detection limit reaches 0.0656 mT. The proposed sensor has the advantages of easy fabrication, high sensitivity, and reliability, showing a great potential in bidirectional magnetic field application.A monolithic 6 × 6 transmitter-router with both port and wavelength switching at sub-nanosecond speed is proposed and experimentally demonstrated. Based on an intra-cavity cyclic echelle diffraction grating router (EDGR) and semiconductor optical amplifier (SOA) arrays, each selectable output port can realize a selected multi-wavelength laser (MWL) output. The measurement results show that all 36 input-output combinations have a single-mode emission spectrum with a sidemode suppression ratio (SMSR) over 30 dB. Simultaneous switching of six laser wavelengths is achieved together with the switching of the output port by a single electrode selection. The switching time is less than 1 ns. It can offer a cost-effective solution to multi-wavelength multi-port optical transmitter-routers for fast distributed optical switching in datacenters and high-performance computers (HPCs).The 2-µm wave band has attracted significant research interest due to its potential applications for next-generation high-capacity optical communication and sensing. As the key component, fast optical switches are essential for an advanced and reconfigurable optical network. Motivated by this prospect, we propose and demonstrate two typical silicon PIN diode switches at 2 µm. One is based on a coupled microring resonator (CMRR), and the other is based on a Mach-Zehnder interferometer (MZI) with a push-pull-like configuration. The measured insertion loss of the CMRR switch is less then 2.5 dB, and the cross talk is less then -10.8 dB. The insertion loss of the MZI switch is less then 2 dB, and the cross talk is less then -15.6 dB. The switch times of these two structures are both lower than 12.5 ns.The polarization singularities in momentum space, rather than in real space, are capturing interest for active singular optics with exotic light scattering and various topological phenomena, which have potential applications in vortex nano-lasers, valley exciton emission, and others. Here, we propose to magnetically control the polarization singularities in momentum space in the photonic crystal slabs with inversion spatial symmetry (P symmetry). A pair of C points (circular polarization points) with the same topological charge is spawned from a V point (polarization vortex center), and they can be dynamically shifted in momentum space with the variation of the magnetic field. Moreover, the coupling between transverse electric (TE) and transverse magnetic (TM) modes induced by the magnetic field gives rise to a hybrid mode, which can close certain leaky channels to achieve an accidental V point. Such active manipulation of polarization singularities with magnetic field is promised for various applications in light-matter interactions and reveals novel phenomena and physics in singular optics and topological photonics.We present a photoinduced reconfigurable metasurface to enable high spatial resolution terahertz (THz) wave modulation. Conventional photoinduced THz wave modulation uses optically induced conductive patterns on a semiconductor substrate to create programmable passive THz devices. The technique, albeit versatile and straightforward, suffers from limited performance resulting from the severe lateral diffusion of the photogenerated carriers that undermines the spatial resolution and conductivity contrast of the photoinduced conductive patterns. The proposed metasurface overcomes the limitation using a metal-jointed silicon mesa array with subwavelength-scaled dimensions on an insulator substrate. The structure physically restrains the lateral diffusion of the photogenerated carriers while ensuring the electrical conductivity between the silicon mesas , which is essential for THz wave modulation. The metasurface creates high-definition photoconductive patterns with dimensions smaller than the diffusion length of photogenerated carriers. The metasurface provides a modulation depth of -20 to -10 dB for the THz waves between 0.2 to 1.2 THz and supports a THz bandpass filter with a tunable central frequency. The new, to the best of our knowledge, design concept will benefit the implementation of reconfigurable THz devices.Metrology experiments can be limited by the noise produced by the laser involved via small fluctuations in the laser's power or frequency. Typically, active power stabilization schemes consisting of an in-loop sensor and a feedback control loop are employed. Those schemes are fundamentally limited by shot noise coupling at the in-loop sensor. In this Letter, we propose to use the optical spring effect to passively stabilize the classical power fluctuations of a laser beam. In a proof of principle experiment, we show that the relative power noise of the laser is stabilized from approximately 2 × 10-5 Hz-1/2 to a minimum value of 1.6 × 10-7 Hz-1/2, corresponding to the power noise reduction by a factor of 125. The bandwidth at which stabilization occurs ranges from 400 Hz to 100 kHz. The work reported in this Letter further paves the way for high power laser stability techniques which could be implemented in optomechanical experiments and in gravitational wave detectors.We experimentally demonstrate 10-channel mode-division multiplexed free-space optical transmission with five spatial modes, each carrying 19.6925-Gbaud dual-polarization quadrature phase shift keying signals. selleck chemicals llc Strong inter-mode cross talk is observed in our commercially available photonic lantern based system when using a complete orthogonal mode set as independent channels. A successive interference cancellation based multiple-input multiple-output digital signal processing (DSP) algorithm is first applied to mitigate the inter-mode cross talk in mode-division multiplexed systems. The DSP also supports unequal transmit and receive channel numbers to further improve the cross talk resiliency. Compared to the conventional minimum mean square error DSP, the required optical signal-to-noise ratio of the successive interference cancellation DSP is decreased by approximately 5 dB at the hard-decision forward error correction limit. As a result, this system demonstrates a record-high independent channel number of 10 and spectral efficiency of 13.7 b/s/Hz in mode-division multiplexed free-space optical systems.Digital optical phase conjugation (DOPC) can be applied for light-field focusing and imaging through or within scattering media. Traditional DOPC only recovers the phase but loses the polarization information of the original incident beam. In this Letter, we propose a dual-polarization-encoded DOPC to recover the full information (both phase and polarization) of the incident beam. The phase distributions of two orthogonal polarization components of the speckle field coming from a multimode fiber are first measured by using digital holography. Then, the phase distributions are separately modulated on two beams and their conjugations are superposed to recover the incident beam through the fiber. By changing the phase difference or amplitude ratio between the two conjugate beams, light fields with complex polarization distribution can also be generated. This method will broaden the application scope of DOPC in imaging through scattering media.
My Website: https://www.selleckchem.com/products/brivudine.html