Notes

15 Of The Best Documentaries On Boarding Up Windows And Doors
Boarding Up Windows and Doors Before a Storm Hits

Insuring your windows and doorways before an event can give you measurable protection against damage. To accomplish boarding up commercial property www.repairmywindowsanddoors.co.uk , you will should have a few things in the go.

First, measure the window's height and width, including the framing (not the trim or masonry). Keep these measurements in mind so you won't forget.

Preparation

It is best to board up your windows and doors prior to an event like a hurricane or natural disaster. This will stop property damage and reduce the loss of life. It requires an enormous amount of planning to build a board around windows. You must purchase and measure plywood boards and you must know the exact dimensions of each window. It also takes time to cut the boards and then install them correctly. Fortunately it is possible to make the process simplified by starting the preparations when you first hear of a possible storm coming in your area. You can avoid a stressful rush in the last minute and make it easier for you and your employees.

Start by listening to the forecasters of the weather and following the guidelines provided by your local government. If you start earlier in the process, you will have more time to collect the materials and store them without being overwhelmed by the approaching storm. You may need a large amount of plywood to cover your windows according to the severity and imminence of the storm. Use a tape measure to determine the width and height of each window opening. Make sure to consider the framing or trim around each window as and any sills with extended extensions in the event that they are required.

Divide the total width and the height of your window by two to determine the amount of plywood sheets that you will need. If your window is wide of 16 inches, then the thickness of each sheet is 8 inches. If your exterior is made of wood drill pilot holes into the plywood sheet so that they align with the window frame below. This will reduce splitting when you screw in the screws.

To make sure that the window's opening is bigger than what a sheet of plywood can handle cut two sheets that are each half the size of the desired window and place them side-by-side on the wall. Then cut a piece 2 by 4 in (5.1 by 10.2 cm) lumber to the length of the connecting edges of the plywood sheets and place it on top of the seam. Then you can drive 2.25 in (5.7 cm) screws through the bracing and into the plywood sheet to join them.

Materials

To ensure security and safety For your safety and security, only use materials that are sturdy and won't break or splinter in strong winds. The most popular material used to encase windows is plywood, which is cheap, readily available and easy to work with. Select plywood that is exterior grade (CDX) since it will be stronger and have less knots and warps. Storm shutters or hurricane shutters are a more durable option. They can be installed over existing windows and offer better protection against glass breakage and storms.

Once you've identified the location of your windows, measure the height and width of each one to determine how much plywood you will need. Then you can use the power drill to drill pilot holes into the plywood sheets at two-inch intervals around each window. Mark the studs on the wall before attaching the plywood to ensure the boards are secured. If you have wood siding in your home, search for nailheads to determine stud locations. You can also use a drill to find the studs' locations. Drive the screws into the framing, not into the trim or sheathing. A plywood panel attached only to these materials can be a danger to safety during severe winds.


If your window is too large for one sheet of plywood, you could cut two pieces of plywood each half the size and join them using two by four inches of lumber. Label each piece of plywood so that you know which window it will be covering.

To affix the plywood panels to the wall, make use of corrosion-resistant screws that are long enough to penetrate both the sheathing and studs. To attach the plywood panels to the wall, make use of corrosion-resistant screws that are long enough to penetrate the sheathing as well as the studs.

It is also worth considering installing polycarbonate security glass similar to DefenseLite on your primary windows. These transparent shields adhere to the existing glass to guard your doors and windows. They are virtually unbreakable, deterring criminals from breaking into.

Installation

If you live in a region susceptible to hurricanes, or are planning on moving to one the best option is to secure your windows and doors before the threat of a storm approaches. This project can be completed quickly and efficiently, but only if you take the time to measure and cut your plywood panels before the storm arrives.

You'll require other tools as well such as a drill, a saw (or nail-driven hammer in the event that you don't have the power tool), a level, gloves, and safety glasses. It's an excellent idea for the plywood to be coated with sealant to make it waterproof.

Begin by measuring each window opening's height and width. Then cut your plywood sheets to fit into the frames. This is best done on site since you will have more control over the exact dimensions.

Cut the boards to the size you want using a circular or track saw. Once installed it is necessary to sand all of them. After your boards are set then screw the 3" stainless steel hanger screws into the framing posts around each window. Use washers on each bolt, and wings nuts to secure them. Make sure that every screw penetrates at least 2 inches into the studs, to ensure that the boarding is sturdy enough to withstand strong winds.

If you're building with concrete block, you could attach the plywood to the structure by using galvanized pan-head screws that are driven through the overlapping edges of each panel into masonry blocks or cinder blocks. It is also necessary to drill pilot holes in the masonry and then screw corrosion-resistant screws into the holes. This project can take up to three hours per window, which is why it's essential to begin the process when you learn that a hurricane watch has been issued. This will give you time to finish the project before the storm hits.

Maintenance

If you're a homeowner or business owner, you should have the necessary materials to board up windows and doors ahead of a severe storm. This can save you from costly repairs and also protect your home from further damage from wind, rain, flying debris and other elements that can affect windows.

Having the right materials can make the boarding up process much easier and quicker to complete. It is important to precisely measure the windows. This will ensure that the OSB or plywood fits well and will not fall off easily. If you are using plywood, be sure to use exterior grade sheets and consider adding a second protective finish.

Note the locations where the screws are going to be inserted into the board once you have taken measurements of the OSB or plywood. Make use of a drill to drill holes at 12-inch intervals in the plywood. This will allow you to safely fasten the boards with hanger bolts in an emergency or disaster. Once the storm has passed and the local authorities have given you the all-clear, remove the bolts, but save them in case of emergency.

The next step is to install the plywood panels over the windows. This is a job for two people, so be prepared before starting. If you're using plywood make sure you sand the edges to ensure they're smooth and won't scratch paint or trim. Then use corrosion-resistant screws to attach the plywood using the pilot holes. If your home has shingles made of vinyl it, nail the plywood directly to the shingles, and not to the wood framing.

A boarded-up window can also be used to deter burglars. The burglars will be more likely to target a structure with a window that is broken or one that's not locked. Also, they are more likely to break in stores with a smashed-up window than one that has no. If you're a retail business owner, this is a matter you need to consider seriously.

Here's my website: https://www.repairmywindowsanddoors.co.uk/dover-emergency-boarding-up-near-me/