Notes

Is Your Company Responsible For A Double Glazing Lock Repairs Budget? 12 Tips On How To Spend Your Money
Double Glazing Lock Repairs

Good locks on your windows and doors can stop burglars from getting into your home. In general, they don't enjoy breaking glass or squeezing through windows that are not closed.

Some owners of double glazing, however, have experienced problems with their door or window lock after installing. These issues can be fixed without the need for a new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or broken and requires a locksmith, they can fix it for you. They can fix hinges, striker plates and locks for double glazing. They will also be able to adjust the cylinder's position to fix any misalignment issues that could be causing your handle to not operate correctly.

The mechanism may be locked when the key is inserted into the lock, but it does not turn or is difficult for you to insert. Grease or dirt can be trapped in the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon but not oil as oil can attract dirt, and cause it to stick to the inside of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should make through the mechanism, and the lock should be able turn without difficulty.

A malfunctioning lock could be caused by loose screws within the lock mechanism. They can loosen and fall out or break off completely, preventing the lock from working correctly. A screwdriver is a tool to tighten these screws, but it is important not to tighten them too much, as this can damage the internal components.

A damaged lock can be dangerous for you and your family. This is especially the case if you have children. It can be easy for them to open the door without your knowledge, and this can give them access to your home. If you're worried about the possibility that this could occur, a licensed professional locksmith can assist you re-secure the double glazing doors.

Richmond double glazing repairs is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your particular needs, which means that in many cases replacement doors and windows are not necessary.

Handles that are broken or are damaged

As part of their overall security package, most double-glazed windows feature a multipoint lock. This is a great choice for those concerned with potential thieves who may try to gain entry to your home. Ask your installer about antilift blocks. They can be installed as an addition to the existing locks and ensure that your windows are securely closed.

It's not uncommon for the handle locks to become damaged or fail. They are the first part of your window to be pushed open by criminals who want to break in. The good news is, this is one of the easiest parts to fix.

Modern handles made of aluminium and uPVC operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is usually provided as an additional option on new uPVC window installation. As an upgrade option older style uPVC or aluminium handles that are no longer used can be upgraded to shoot bolt locking systems.

If a handle is damaged, it is essential to get the handle repaired as quickly as you can. The damaged handles could stop the window from closing properly and permit drafts to get in. It could also be a weak point that burglars with a plethora of opportunities could exploit, placing your home and belongings at risk of theft.


To fix the malfunctioning mechanism, you must first access the window frame and remove the broken handle. The gearbox that opens the handle is located and the model is identified so a replacement can be sourced which matches the profile of the internal window frame mechanisms.

Once the mechanism has been replaced, the handle can be re-affixed using the original screws - but we would recommend replacing them with more long screws because this will ensure a more secure fit. The final stage is to apply a layer of clear sealant to shield the handle from further corrosion. Once that's done, your window will be fully operational again and at less than the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not close properly, draughts can enter your home, the security measures will be compromised, and there is an increased chance of water damage or damp. Window hinges that break or fail are a common problem and can be easily repaired.

If you have a window made of uPVC that won't close or open and close, it's likely that your hinges are damaged or broken and require replacement. While most window manufacturers require you to purchase a new window unit in order to fix this simple problem We're able to repair the hinges that are damaged and save you money.

Window hinges are often damaged from repeated use or they might be damaged through rust over time. If you've broken a window hinge, it's important to take precautions to prevent further damage. This includes not forcing the window to open or close.

You can locate the appropriate parts for your hinge by identifying its model. Common types of window hinges are Maco, Mila, Roto and many other brands. It is recommended to speak with an expert in this situation to ensure that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and could cause further damage.

The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be a significant source of noise and also allow water infiltration that can cause damage to your windows.

Make sure whether the pin barrels on both hinge halves are aligned. If not then tap the headpin using the hammer to create a slight bend in hinge barrel. This will help keep the pin in the right position. Then, ask a friend to hold the door while you take the hinges and hinge screws from both the doorjamb and the door. Replace the hinges with ones of a matching size and install the screws with glue. Finally put the hinges in place using clamps or weights until the glue dries.

After you have fixed your hinges, you can install the door again. You can also reattach the handle. It is a good idea to replace the screws using the same length of wood dowels as the screw that was originally used so that they match up with each one.

Broken or damaged glass

While uPVC windows do a great job of keeping cold out and warm in, they can become damaged over time. This can include broken or damaged glass, as well as defective locks. If left unattended, this can become a very costly issue. It can also affect the appearance of your home and can lead to a loss in insulation. It is important to repair any damage immediately.

If your glass is cracked but not shattered it is usually possible to repair it yourself using the right tools and methods. Be sure that the area around the broken glass is clear of debris so that any pieces of glass do not cause injuries or cause a trip hazard. Next, remove any broken pieces and dispose of them appropriately. Apply masking tape over the entire area. This will stop glass shards from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's a good idea to prepare the glass before gluing it back into place to ensure that you'll have enough space to complete the project.

Before applying the glue, wipe the surface of the damaged frame and the glass with a a dry, clean cloth. Follow the curing and application directions that may differ from product to product. You may have to clamp the broken glass with clamps made of lightweight materials designed to hold fragile materials, depending on the angle.

After the adhesive has completely cured, carefully install the glass inside the window frame. Make sure that it is aligned with the frame's edge and that there aren't gaps between the glass sash as well as the frame. Be careful not to bend the window while it's put back in place, as this can weaken the seal and lead to water infiltration and condensation.

Get in touch with a professional glazier, such as O'Brien(r) to arrange a replacement if your glass window is completely broken. If you leave broken glass unattended, it could pose a safety risk for pet and children It's therefore essential to act quickly.

Website: https://www.repairmywindowsanddoors.co.uk/richmond-windowrepair/