Notes

The Most Important Reasons That People Succeed In The Repairs To Upvc Windows Industry
Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However when windows with double panes are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case, you will need to find some plastic spacers that help the new pane to fit perfectly into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is large, you might want to use security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can access the frame. Then, double glazing repair Altrincham can remove the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle wears out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need close your window and do an experiment fit. The corner joints of the sash need to align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix that can be done by any skilled DIYer. Based on the severity of the problem the old caulking may need to be removed before a new layer of caulk is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.


Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens with a breeze. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. It's very simple to change a window hinge however it is simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are happy to provide suggestions.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form between the sash and the frame. These can be easily fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. The interlock, which is on the hinge side of the window, may also become misaligned, again it's feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as possible.

My Website: https://www.repairmywindowsanddoors.co.uk/altrincham-windowrepair/