Notes

The 10 Scariest Things About Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is large, you might prefer an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues, including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit, you can tighten the screws until they remain in place.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to take action if awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.


It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, the old caulking might need to be removed. When it is time to uPVC repair, you should avoid over-caulking. This can make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also important to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. First, the hinges due to wear and tear may become displaced, which causes a gap to form between the sash and the frame. If they're beyond repair, it may be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it is possible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

With West Bromwich window repair and repair windows made of upvc will provide a great level of insulation and security for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional immediately.

Homepage: https://www.repairmywindowsanddoors.co.uk/westbromwich-windowrepair/