Notes

Looking Into The Future What's The Patio Door Lock Repair Industry Look Like In 10 Years?
Patio Door Lock Repairs

Over time, patio doors go through wear and tear which can result in lock malfunctions. There are fortunately, a number of simple and effective methods that can restore your uPVC patio door's security.

It's about realigning the lock or cleaning the mechanism for locking, these quick fixes can help you make your home more secure.

Clean the Lock

Although patio doors are a great way to bring the outside in and keep the elements out, they can also be a security risk when your lock isn't functioning as it should. Over time, wear, tear, hot and cold weather dirt, and other debris can cause your patio door lock to become difficult to operate. With some minor maintenance you can make sure that your patio door's locks always perform effectively.

It is essential to first clean the patio door lock as well as all moving parts. This helps remove any dirt and coatings that may be preventing the lock from working as it should. Start by wiping down the moving parts of the lock for your patio door with a damp, clean cloth. then use a scouring pad or rough damp cloth to scrub any hard-to-reach areas of the door or frame that are ingrained with dirt. You should then wipe down the entire lock using dry cloths to eliminate any remaining dampness and allow it to air dry prior to using it again.

If you have a patio door that uses a pin tumbler latch mechanism, you can apply lubrication to the lock by applying powdered graphite to the key or using an lubricant based on Teflon like WD-40 Multi-Use. This kind of lubricant is easy to apply and doesn't break down over time. If you're unable to find the right lubricant for your lock, you can apply a pencil that has a more of a thicker tip. Insert the pencil into the lock and jiggle it around a bit to spread the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors clear of dust, dirt and other debris. sliding patio door repair are particularly vulnerable to snow, ice and other debris that can cause them get stuck or to bind. This could make it difficult for your patio door to open and close.

Sliding patio door track rails and rollers can be cleaned by removing damaged or dirty weather stripping and cleaning them before replacing it. Patio door rollers can also be cleaned and sprayed down with a nonstick lubricant.

Lubricate the moving parts

uPVC french doors, like sliding patio doors, work using 3-4 or sometimes 5-point locking mechanisms which include the handle and lock cylinder operated by the key. These doors also require maintenance, specifically lubrication on the moving parts. This can be accomplished using an oil that is thin (never WD40) and should be done every year.

If sagging hinges don't cause the problem, it could be that the door isn't aligned. It may be rubbing or catching the strike plate's opening in the frame. Remove the strike plate and employ a sharp tool enlarge the mortise. This will permit the latch to fit properly into the hole, and also prevent it from scratching against the frame.

Once the cylinder is cleared of the way and out of the way, measure its width using the help of a book or piece wood that fits into the gap between the adjustment screw and the lock. The outer dimension is the distance from the outside of the door to the middle of the cylinder, while the inner dimension runs from the center of the adjustment screw until the end of the cylinder.

Check patio doors repairs near me of the lock.

If your patio door latch is difficult to turn even after cleaning and lubricating, it's possible that it's out of alignment with the strike plate hole. Check if your door is properly balanced and if the hinge screws are secure. In many cases, moving the strike plate upwards or downwards can solve the issue.

Oftentimes, the problem occurs when the strike of the lock is too small for the latch to engage. In this instance you'll need to expand the hole using the hammer or chisel and then test the latch to ensure that it connects to the strike plate in a smooth manner without rubbing against or landing on the frame of the door jamb.

It is important to identify the type of mortise lock you currently are using before you purchase the replacement. This can be done by looking at the faceplate and noting whether it is square or round. Then, look at the screw holes on the existing lock and note the size of each one. This will help you find an alternative lock that is the same width and is a perfect fit for the hole that you already have.

In addition to identifying the mortise lock that is currently in use, you'll also need to check it for any nicks or bends that may require repairing. A bent or damaged latch is more prone to break than one that's been utilized often, so make sure to replace the lock with a brand new one that is secure if you find any signs of damage or wear.


After you've determined the type of lock replacement that you require It's time to start the actual repair. Take the old handle and spindle from the patio door, and then put in the new one. Start by installing the interior handle. Align it with the spindle, and then secure it in position using two screws or bolts. Once the interior handle is installed, put in the handle on the outside and screw it into place as well. After you've completed the steps you can test the new handles to ensure that they are able to open and close with ease and that the latch catches correctly when you strike the plate.

Make sure the door's strike is checked

The strike plate and the door latch are two components that work together in order to secure the door. An incorrectly aligned strike plate and door latches can result in the latch not being able to latch the door correctly. Fortunately, the issue is usually easy to correct.

Check the holes for receiving of the strike plate to make sure they are clear of obstructions like dirt or plastic plugs. Then loosen the screws that keep the strike plate in place, allowing it to move vertically, but not detaching it from the door frame. Adjust the strike plate to align its holes for receiving with the latch hooks of the door latch. Once the strike plate is adjusted tighten the screws, and test the door to see whether it locks smoothly after the new adjustment.

These plates are difficult to reach for homeowners with sliding patio doors. However they are crucial to secure and unlock your door. The plates made of metal are located at the top and bottom jambs of your door, where they serve as the support for the latch. The door latch is able to slide into the strike plate to create an airtight seal when closed. If the strike plate is damaged, rusted, or not installed correctly, it can stop the latch from locking the door securely.

A misalignment between the strike plate and latch is one common cause for the patio lock not to close or remain in place. This can be confirmed using the "lipstick" test. Apply some lipstick across the edge of the deadbolt and then cover it with masking tape. When you shut the door, the lipstick will leave a mark on the tape, indicating exactly where the latch meets the strike plate. If the mark is too high or low it is possible to adjust the strike plate.

If your sliding patio door locks aren't functioning properly they could be a problem in keeping your home secure from intruders. You need to resolve this issue as quickly as possible. By following these simple steps, you'll be able to fix your patio door's lock and get it back to normal within a short time.

Website: https://blogfreely.net/heliumrose0/5-laws-anyone-working-in-patio-doors-repair-should-know