Notes

Then You've Found Your Timber Sash Windows Cambridge ... Now What?
Door Hinge Repair Cambridge

The hinges on your doors are a small but crucial element that can make a huge impact on the appearance and functionality of your doors. Replacing the hinges that sound squeaky is a cheap and quick improvement that can increase your home's curb appeal.

A common method to fix hinges that are squeaky is to use bar soap or petroleum jelly. Simply rub the item on the hinges until it's coated.

Replacement Hinges

Hinges are a small component that can cause a large amount of damage when they wear out or break. The good news is that hinges can be repaired without any special tools. It is crucial to choose the proper hinge for your home. This will help ensure that your door can be closed and opened easily. If your door hinges do not work properly contact a professional immediately to fix them.

A faulty hinge can cause the door to swell or pull away from the frame. Often, this is due to improper use or a heavy weight. Lubricating your hinges is crucial to avoid this. This will stop the hinge from getting damaged or rusty, and will extend the lifespan of your door.

There are several different types of hinges. Each has its distinct advantages and drawbacks. The most common hinge is the butt joint that is attached to a door using a pin on each side. This hinge is ideal for doors with light weights since it doesn't require much strength to open or close. However the butt joint is also more susceptible to deterioration than other hinges.

For doors that weigh a lot, it's best to use a continuous piano hinge. This kind hinge is fixed to the door and runs the entire length of the door and allows it to close and open without difficulty. This style has the advantage of not needing an additional center support, and is more stable.

Another type of hinge is the storefront pivot hinge, which enables the door to be pivot from one point at the top and bottom of the door. These are usually used in commercial spaces and can be difficult to fix if they're damaged. A professional can help you with this issue by mounting an entirely new pivot hinge or changing the old one. The price of hinges can vary depending on the type.

Loose Hinges

If hinges aren't in good condition they will cause the door to hang in a crooked manner and could even begin to scrape against the floor, which can be annoying at the best. Loose hinges are a common problem which can be easily solved by anyone with a few basic tools. In most instances, tightening screws on the hinges will solve the issue. However, in some cases the screw holes may have been stripped and they will not stay in place. If the holes in the screws are damaged, you'll need to bore the holes and plug them with wooden dowels, or glue-coated wooden matches.


To stop your door hinges from becoming loose, you must keep them lubricated and tightening them regularly. Check for any signs of damage on the hinges. If you notice cracks or chips on the metal, it might be time to replace your hinge. cambridge windows and doors is also recommended to replace hinges if they begin to stick or bind as you open and close the door.

The most common cause of hinges on doors becoming loose is wear and tear resulting from continuous use, but without proper lubrication or tightening. This is true especially for doors that are commonly used by children. They may hang on handles of doors or even swing on the hinges. This puts a lot of unnecessary stress on the hinges, which could cause them to become loose and then falling out completely.

If the hinges are loose you can tighten them up using a screwdriver. However, if the hinges are loose for a long period of time, the constant movement of the hinge plate and screws will start to enlarge holes in the area where screws go. The screws will cease to be useful if they are unable to stay tight. To remedy this, dip the bare end a wooden match in some regular carpenter glue, then tap it lightly with the Hammer. This will force the glue as far into the hole as possible. It is likely that you will need to use several matches that are coated with glue to fill in the hole.

Rusty Hinges

Rust can be a problem with hinges for doors. This is especially relevant for older doors. It can make them appear bad, but more importantly it could cause the hinge to break and fail which could pose a danger to those who use the door. It is possible to save an old hinge by performing some work. The first step is taking off hinges and cleaning them to eliminate any gunk. Once the hinges are cleaned and oiled, they are ready for use again.

In days gone by, low quality hinges were made of steel and iron that were prone to be rusty, but modern doors are usually made with brass or metal alloys which don't rust as easily. However, there are some who still rely on traditional iron hinges due to their durability and beauty, even though they are more susceptible to rust than modern hinges. The best way to avoid this is to prevent the hinge from rusting in first place.

The easiest way to do this is to clean the hinges with a steel wool and some water, especially if they are damp. If you do this regularly, rust will not be a problem for your hinges for doors.

If you're looking to take things a step further, try using stainless steel for your hinges. In contrast to iron, stainless steel will not get rusty and can provide your home with a more modern aesthetic. If you're not able to change the hinges on your existing door, however, the best way to stop corrosion is to keep it away from the hinges on your doors by regularly scrubbing them down and then oiling them.

It is best to take the hinges off completely to remove any excess rust. When the hinges are clean you can use a mix of oil and vinegar to further lubricate them and aid in helping to protect them from corrosion. This is a cheap and simple solution that you will find in many homes. It's worth a shot before you replace your hinges.

Doors that won't close

Over time, doors may become displaced due to the expansion and contraction of wooden frames. When this happens, the door may be caught on the edges of the frame, or snag on the latch when you attempt to shut it. A little work will often solve these issues. If you are able to tighten the hinges and fix the issue then your door will close correctly again.

Begin by checking the hinges for any loose screws. A loose screw can cause a hinge leaf to sag and create a gap between it and the jamb. This can cause the latch to be unable to pass through the strike plate hole and cause a jammed door.

To fix this issue, remove the hinge screw and slide a piece of cardboard (we use the back of old legal pads to guide us) between the hinges and the door jamb. Then screw the hinge back in its place. This will widen the gap along the hinge's side, and narrow it on the latch side which allows the latch to be free of the strike plate. If this resolves the issue, repeat the procedure on the remaining hinges.

If you are still having issues then you can hammer or shim your strike plate to align it with the hole for the latch. If this is the situation, a small amount of wood filler or paint is usually enough to hide the changes.

Long-term use and physical damage can cause the strike plate to become curled or warped, which can cause the latch to touch the edge of the hole, but not extend enough to keep the door closed. Apply lipstick to the latch, and then stick an edging strip onto the strike plate. Close the door and open it. The lipstick will leave an impression on the tape at the point that the latch meets the strike plate hole. If the mark is below the hole, this means that your latch needs to be moved upwards.

Homepage: https://www.repairmywindowsanddoors.co.uk/cambridge-windowrepair/