Notes

3 Reasons You're Timber Sash Windows Cambridge Is Broken (And How To Repair It)
Door Hinge Repair Cambridge

The hinges on your doors are a minor but crucial element that can make a significant difference in the look and performance of your doors. Replacing your noisy hinges is an inexpensive, quick fix to improve the appearance of your home.

One method of fixing hinges that are squeaky is to make use of petroleum jelly or bar soap. Rub the item onto the hinges to cover it.

Replacement Hinges

If they're worn down or damaged, hinges can cause major damage. Fortunately, hinges can be repaired without the need for special tools. It is essential to select the proper hinge for your home. This will ensure that your door shuts and opens smoothly. If your hinges for your door aren't working properly, call an expert as soon as you can to fix them.


A defective hinge for a door could cause the door to become stretched or pulled away from the frame's base. This is often caused by improper use or weight too much. To prevent this from happening, it's crucial to keep your hinges lubricated. This will stop the hinge from rusting or squeaking and will extend the lifespan of your doors.

There are several different types of hinges. Each type has its own advantages and drawbacks. The butt joint is the most basic hinge. It attaches a door to both sides using pins. This type of hinge is perfect for doors with light weights as it doesn't need the most strength to open and shut. However the butt joint is more prone to deterioration than other hinges.

It's best to use continuous piano hinges on heavier doors. This type hinge is fixed to the door and runs the full length of the door and allows it to open and close without difficulty. This kind of hinge has the advantage of not requiring a center support, and is more sturdy.

Another type of hinge is the storefront door pivot hinge, which permits a door to be pivoted from one location at the top and the bottom of the door. These hinges are typically found in commercial buildings and are hard to repair when damaged. A professional can help with this issue by mounting the new pivot hinge or changing the old one. The cost of hinges will vary according to the type.

Loose Hinges

If hinges aren't tight, they will cause the door to hang in a crooked manner and may even start to scrape against the floor, which is irritating at the very least. Loose hinges are a common problem that can be easily fixed by any homeowner who has the use of a few tools. Most of the time, simply tightening hinge screws will fix the problem however, in some cases, the screw holes might have become stripped and won't stay in place. If the holes in the screws have become soiled and you need to drill them and plug them using wooden dowels or glue-coated matches made of wood.

It is important to lubricate and tighten your door hinges on a regular basis to prevent them from becoming loose. Look for signs of damage to the hinges. If you spot any chips or cracks on the metal, it might be time to replace the hinge. It's also a good idea to replace the hinges when you find that they're beginning to bind or stick when you open and close the door.

The most frequent reason door hinges become loose is due to wear and tear from continuous use without proper lubrication and tightening. ventilation repair cambridgeshire is particularly the case for doors used frequently by children, as they might hang from the door handles or even swing the door on the hinges. This could cause the hinges to loosen and even fall out.

If the hinges were loose for a short period of time, you may just tighten them with an screwdriver. However, if they are loose for a longer period of time, the constant movement of the hinge plate and the screws will eventually enlarge the holes that the screws are inserted into. This eventually makes it impossible for the screws to remain tight and they'll end up stripped, making them ineffective. To fix this, dip the naked end of a match made of wood into a regular carpenter's glue and then tap it with a hammer to work the glue into the hole as deep as you can. It is likely that you'll have to insert several matches coated with glue to fill the hole.

Rusty Hinges

Rust can cause problems with hinges for doors. This is especially the case for doors that are older. It can make them look awful, but more important, it can cause the hinge to fail and break which could pose a danger to those who use the door. It is possible to save an old hinge by performing some work. The first step is to take the hinges from the door and then clean them of any gunk. After the hinges have been cleaned and oiled, they are ready to use them again.

Modern doors are made from brass or metal alloys which are resistant to rust. However, some people still prefer old-fashioned iron hinges for their aesthetics and durability even though they're more likely to rust than modern ones. The best way to prevent this is to stop the hinge from getting rusty.

It is easiest to clean your hinges frequently by using steel wool and water, especially when they are damp. If you do this frequently, rust won't be as problematic for your door hinges.

If you're looking to take things one step further, you can use stainless steel hinges. Unlike iron, stainless steel will not rust and can provide your home with modern look. If you aren't able to change the hinges on your existing door but you want to the best way to prevent rust is to keep it off your door hinges by periodically scrubbing them down and then applying lubrication.

It is best to take the hinges off completely to scrub any rust that has accumulated. When the hinges are clean you can use a mix of oil and vinegar to further lubricate them and help keep them safe from corrosion. This is a cheap and easy solution that can be easily found in the majority of homes, so it's worth a shot before you consider replacing hinges.

Doors that won't shut

In time, doors become displaced due to the expansion and contraction of wooden frames. This can cause the door catch on the corners or to latch when you close it. A little work can often fix these problems. If you can tighten the hinges, and fix the misalignment of the door, it will likely close again.

Examine the hinges to determine whether there are loose screws. The loose screws can cause the hinge to sag and create a gap between the leaf of the hinge and the jamb. This could cause the latch not to reach the strike plate's hole, and cause a jammed-up door.

To fix this, take off the hinge screw and slide a piece of cardboard (we make use of the back of old legal pads to guide us) between the hinges and the door jamb. Screw the hinge into place. This will widen the gap along the hinge's side, and narrow it down on the latch side and allow the latch to clear the strike plate. If this solves the issue then repeat the process on the remaining hinges.

If you are still having issues you could hammer or shim the strike plate in order to align it with the hole in the latch. If this is the case you're in, a small amount paint or wood filler is usually enough to conceal the changes.

Long-term use or physical damage can also cause the strikeplate to be warped or curved, which can cause it to touch the edge and not extend far enough into the hole to secure the door. To check for this, apply lipstick to the latch and then stick a strip of masking tape on the strike plate. Close the door and then open it. The lipstick should leave an impression on the tape where the latch meets the strike plate hole. If the mark is located below the hole, it means that your latch needs to be moved upwards.

Here's my website: https://www.repairmywindowsanddoors.co.uk/cambridge-windowrepair/