Notes

Five People You Should Know In The Sliding Patio Doors Repair Industry
Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This could be due to a variety of issues, including dirty tracks or improperly aligned rollers.

Start by cleaning and lubricating your rollers. You can also utilize the adjustment holes on the lower part of the movable panel to adjust the alignment of your rollers.

Dirty or Damaged Track

A sliding door that does not slide smoothly could be due to an unclean or damaged track. Over time dirt, grit and even rust may accumulate, preventing the track to slide smoothly. The solution is a thorough cleaning with the use of a brush and mild detergent. It is best to do this task frequently to ensure the smooth operation of your door, and to avoid the need for costly repairs down the road.

A door that is leaky is another common issue that requires prompt attention to avoid water damage, mold growth and structural damage. The issue is usually caused by worn weather stripping and a misaligned door. This can be corrected by replacing the old weather stripping and aligning the doors.

Another issue that can be solved with a bit of DIY work is the problem of rollers that veer off their track. This can be a difficult task, so ask a friend to help you. Sit inside the house and lean a panel toward you to move the rollers. Once the panel is lifted off the bottom track, you'll need to place it on sawhorses to keep it from falling off. Then, loosen patio door repair of the roller's screws and remove them with a screwdriver. It is now possible to remove any dirt that is caught between the wheels and the tracks. Clean each wheel by rubbing denatured alcohol on a rug. Reposition the wheels back to their tracks and attach them once more.

If a section of the track is bent, it might be possible to straighten it by using a rubber mallet or block of wood. However, if the bent section is close to the hinges and is likely to cause more damage, you'll be better off calling an expert to ensure safety.

Rollers that are not aligned

If your sliding door has difficulty sliding, it's most likely that the rollers are not aligned correctly. The wheels may be dirty or rusted and their bearings are worn down. This friction causes the door to become snagged and grind when it is opened or closed. This can also result in the sound of squeaking.

Fortunately it's a simple fix. The wheels are mounted on an adjustable bracket that can be adjusted, which means you don't have to remove the door. Find the holes for adjustment (usually on either side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise turn lowers it. Continue to adjust the door until it is open and shuts smoothly.

It is essential to adjust the wheel prior making adjustments to your latch. To ensure that the lock functions properly the latch hooks need to be aligned with the strike plate. If you don't do this, the latch could accidentally shut or open while you're not in the room.

Patio doors that slide are a major investment, and making sure they are functioning correctly helps keep your family safe and secure. You can prevent costly repairs by fixing common issues like faulty tracks, rollers and handles. For more help with your patio doors, call our team. We can help you maintain your sliding patio doors in good condition by evaluating the repairs needed. Our experts are also able to assist with any replacement parts you might require.

Damaged or loosely held door frame

Sliding patio doors are a great option for any home. They provide a convenient and attractive alternative to hinged or swing-open doors for patios. Like other hardware items sliding patio doors may be prone to problems over time. Fortunately, a lot of these issues are easy to fix with a bit of DIY expertise.

A gap in the frame is a typical issue with sliding patio doors. It can be caused by many factors, such as misaligned track or rollers or a damaged door track or bent door frame. In the majority of instances, the issue can be easily fixed by removing the doors and reattaching the track. It is important to be very careful not to damage either the frame or the track.

In some instances, it might be necessary for the entire track to be replaced. This can be accomplished easily with the universal kit that is readily available at major hardware stores. These kits are simple to install and will have your door functioning perfectly in no time.


Regularly inspect the hardware of your sliding door and frame for signs of wear, such as loose screws or bolts. This is a simple and effective DIY patio maintenance task that can be done with an electric screwdriver. In addition, it is essential to grease your tracks and rollers to make sure they operate smoothly and prevent premature wear.

Patio doors are usually the primary entry point to the backyard and outdoor living area for many homeowners. To ensure security and comfort in the home, it's important that they function properly. If you follow these easy DIY maintenance tips, homeowners can extend the lifespan of their sliding patio door and save money on repairs or replacements.

A faulty handle

The sliding patio doors are a great way to get into your home and gain access to your backyard, however they can become difficult to operate when they become misaligned. A defective handle could cause the door to get stuck or be difficult to open and close. The good news is that repairing the handle that is loose is a simple task that can be accomplished at home.

In many cases the loose grip is the result of screws that have slipped out of the backplate. To remedy the issue tighten the screws on the inside of the handle with the help of a screwdriver. If you notice that the handle remains loose, it may be an indication that the threads are worn and need to be replaced.

A damaged latch could be the reason. It is more likely that the latch will break if made of metal instead of plastic. Try applying lubrication to the latch to see if it's not catching, or turning. If this does not work, you may need to replace the lock.

If the handle is damaged or broken, it could be difficult to use. If this is the case it is necessary to replace it with a new handle that is in line with the design of your sliding patio door.

If your patio doors are old and outdated or brand new, Feldco can help you get them back on the right track. We have a variety of high-quality patio doors in different sizes and styles. Contact us today to find out more about our doors! We offer services to Southern California homeowners, including Ventura County and Orange County.

Poor weatherstripping

If you're seeing light around closed doors and windows or notice a draft pulsing on the door or window It's time to change your weather stripping. These strips create an airtight seal that prevents unwanted water, air and pests from entering your home. This helps keep your heated and conditioned air inside, saving money on energy costs.

Depending on the condition of your weather stripping, it may have deflated, and lost its bouncy positive seal. This is easy to diagnose by taking a dollar bill and putting it under the seal on top of the door frame and below the jamb of the door where the two meet. If the dollar bill slides effortlessly between the seal and the door is the time to replace the weather stripping.

If you only replace the worn-out portion of weather stripping, it could cause problems in the future with the seal. It's much more efficient to replace all the stripping. This will let you rest sure that your door will be properly sealed.

Follow our DIY guide for weather stripping to put the correct material for your sliding patio door and frame to ensure a strong, lasting seal. It's a great method to repair your door and reduce your energy bills, so don't put off the project until it's too late. Your wallet and your home will be grateful.

Read More: https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-epsom/