Notes

Repairs To Upvc Windows Explained In Fewer Than 140 Characters
Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need to source some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a good idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional arrives to repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a number of problems such as sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to reach the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and verify the fitting. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform a test fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.


This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open in a breeze, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a simple process, but it's easier to do with someone else to assist in holding the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this shows which way the window should open.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also because of wear and tear, could become misaligned. This will cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it is feasible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen draughts.

repairmywindowsanddoors of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them than to repair them. If you encounter any issues with your Upvc window you should consult an expert as soon as possible.

My Website: https://www.repairmywindowsanddoors.co.uk/spalding-windowrepair/