Notes

The History Of Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However If you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan to attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any shards fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they may be afflicted by a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need to open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and verify the an appropriate fit. If you are happy with the size of the window, tighten the screws to keep them in place.

If you aren't able to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.


This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repair s, do not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens with the breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is an easy procedure, but it is simpler with someone else to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to offer assistance.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges, also because of wear and tear, can become misaligned, this causes an opening to appear where the sash joins the frame. If they are beyond repair, it may be required to realign them. The second is the interlock, which is on the hinge side of the window, can be misaligned. Again, it is feasible to give them a clean but in certain cases, it may be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional immediately.

Homepage: https://www.repairmywindowsanddoors.co.uk/aylesbury-windowrepair/