Notes

Repairs To Upvc Windows: It's Not As Difficult As You Think
Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. window repairs near me is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need source some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, over time, they can suffer from a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll have to open the window so that you can access the frame. With an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. You'll first need to close the window and do an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may require removal before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.


If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with an ease. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is very easy to change the hinges on a window but it's much easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be happy to give you advice.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges can also become misaligned due to wear, creating an opening between the frame and sash. This can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. In addition, the interlock could also become disaligned. This happens on the hinge's side and may need to be cleaned. In some instances it is possible to replace them.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder, these are typically fabric tubes filled with some sort of filler and can be placed on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it could be cheaper to replace them rather than repair them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as you can.

Homepage: https://www.repairmywindowsanddoors.co.uk/carshalton-windowrepair/