Notes

Difficulty Problem And Solutions Of Floating Fish Feed Machine
Difficulty Problem And Solutions Of Floating Fish Feed Maker

Your floating fish feed equipment will certainly appear many different problems after it worked a long time, or due to your wrong procedure, your fish feed equipment has actually taken place problems or not functioning well even quit working.

Common problems are low production result, too high puffing or not enough puffing, and poor pellet creating, versus these difficulty problems, specifically on bad pellet developing problem, a few of our clients satisfied this type of problem, some due to resources solution, some as a result of wrong operation, as well as in below we will offer some troubleshooting and also remedies for you.

Solutions Of Low Manufacturing Outcome

1. The screw head is used substantially, please transform the screw head or the whole screw

2. The bushing of the extrusion chamber is worn greatly, please transform the bushing in the extrusion chamber

3. If you altered the formuation or not? for sinking kind pellets: starch web content portion: ≥ 20%, for floating kind pellets: starch web content percentage: ≥ 10%. On top of that: Especially for floating products, the content of animal protein must not be too high.

The role of starch:

1) Starch has strong water absorption;

2) The gelatinized starch can improve the thickness of the product

3) Dual feature of puffing and binding in the last pellets

The duty of healthy protein:

1) Healthy protein has water absorption, flexibility and coagulation

2) Healthy protein is split into: veggie healthy protein and animal protein, Solutions containing vegetable protein are normally simpler to refine than those containing animal protein. Because pet protein is not as very easy to incorporate with various other ingredients or mass as vegetable protein or starch

4. Is the aperture area of the die is suitable or not?

A= 1aperture area area= πr2, 10holes-8mm die 8mm diameter= 4mm redius.


area= πr2, 3.14 × 16= 50.24 mm2.

10 holes × 50.24= 502.4 mm2.


animal feed pelletizer Of Too Expensive Puffing Or Not Sufficient Puffing.

1. The raw products are puffed a lot too very.

1) the conditioner temperature is too high( for damp type machine).

2) The turning rate of the host machine is too expensive.

3) Way too much or as well less water included the raw products or in the conditioner.

4) the holes of the die mould is blocked.

2. The blowing level of the material is inadequate.

1) The extruder manufacturing ourput is low.

2) The conditioner temperature level is insufficient high.

3) The revolving speed of the host equipment is as well low.

4) The heating plate temperature level in the extrusion chamber is too low.

5) Water material is too low in the conditioner or in the raw material.

6) Have you ever altered the formula.

3. fish pellet machine developing.

1) The raw products formula is not so excellent.

2) The functioning temperature is expensive or too low.

3) Feeding raw materials is not stabilized.

4) The cutting rate is not appropriate, too high or also low.

5) The cutting blades are put on.

6) The size of powder basic materials is as well large, you can inspect below the raw products size need.

Die mold aperture φ (mm) grinding fineness needed.

1.095% reach to 90-100 mesh.
1.595% reach to 80 mesh.
2.095% reach to 80 mesh.
3.095% reach to 60 mesh.
4.095% reach to 60 mesh.
5.095% reach to 60 mesh.

4. The final pellets are harsh surface area and various sizes.

1) Some partial holes of the die mould are blocked.

2) The finness of the raw materials is insufficient.

3) The raw materials conditioning is not good.

4) The high quality of the die mould holes is poor.

5) The cutting blades are worn.

6) The water percent in the raw products is not deal with.

5. The extrusion temperature is too low.

1) The heavy steam conditioning temperature is also low (for damp kind maker).

2) The vapor inlet pipeline of the puffing chamber is blocked or the temperature level of the electrical heating gadget is not nearly enough( for damp type machine).

3) Jacketed vapor line (catch) plugged( for wet type machine).

4) The temperature level of the electrical home heating plate is as well low or the electric home heating button is not activated.

5) Raw material dampness is expensive.

6. Particles are blocked before leaving the die hole.

1) The particle dimension of the raw product is too large about the size of the die hole.

2) The amount of water is inadequate to make the product flow.

3) The screw pole is worn considerably.

4) The feeding inlet is blocked.


Here's my website: https://feedmakermachine.com/how-to-stop-chicken-diseases-of-poultry-diarrhea/