Notes

24 Hours To Improve Saab Key Fob Programming
Saab 93 Key Fob Replacement

Saab 93 key fobs can be costly to replace. The process is simple.

You'll need a flathead phillips screwdriver and some patience. Simply insert the screwdriver into the middle of the case, and slowly push to open it.

It is an excellent idea to keep spare keys and fobs. They can prevent you from being stranded or having to pay towing charges.

How to replace the battery

All car key fobs that can lock and unlock your vehicle remotely contain a battery that will eventually fail. When that occurs, owners can change the battery on their key fob themselves with a few simple steps. The key fob comes with two plastic flaps on one side that you need to lift to remove the old battery and install a new one. The replacement battery is a standard CR1632 coin cell and the procedure to install it is easy.

After you have removed the emergency key, apply the flathead screwdriver to the wood to break the case. Be cautious not to press it too much, as the electronics inside the case are delicate and could be damaged if you push too hard.

Saab produced some incredible cars. Many of them are still in circulation today. The ignition keys are among the biggest problems with these automobiles. They can become stuck or fall off with time. It can be expensive for the Saab owner to get a new key from a dealer when they lose their one functioning one. They will need to replace the computer module and then program the new key to convince the car you're not trying to steal it. You can save money by replacing the case.

How do you remove the Manual Key

Key fobs that are used to allow you to lock and unlock your car contain batteries and those batteries have a life span. If you're like the majority you'll lose yours at some time. It's easy to replace batteries that you can use to operate the key fob manually. The only tricky part of the procedure is taking out the old battery from the case. If you're patient and a flathead screwdriver, you can accomplish the task.

Once you have the new battery in place Now it's time to put everything back together. To do this, you'll need to remove the key fob case, which is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. Gently work the case until it splits, then you can remove it from the key fob.

You may have to reprogram the new key fob if your previous key fob lost its connection to the car's security system. This can be done using the manual learning procedure to add a new FOB to your 2010 Saab 9-5. This method DOES NOT make keys previously learned invalid which means you can use your existing FOBs if they need to be re-programmed. To begin this process the FOB that is to be programmed must have a mechanical key cut that matches the one of the vehicle.

How to change the case

Whether you're replacing the battery or the manual key, it's best to replace the case as well. The cases are susceptible to wear out, particularly after a lot of use. Removing the case from your SAAB 9-3 is a relatively simple process, and you don't even need any special tools to complete the task.

The first step in changing the case is to remove the manual key from the key fob. This can be done by pressing the blue SAAB logo on the fob and then pulling the manual key out. The key fob may be a bit sticky, so it might take a amount of force to get the key out.

Once you've removed the manual key from the case, you can begin to remove the electronic components. You'll require an flathead screwdriver to accomplish this. Be careful not to scratch the electronics inside, so use care when using your screwdriver. After you've removed the electronics, it's time to remove the battery. After you have replaced the battery you can put everything back in a brand new case. You can purchase new cases online for a very low cost.

How to program the new Key

Key fobs that allow you to lock and unlock your car remotely use batteries, however they have a limited life. It is crucial to keep in mind this and change the battery on your key fob each 3-4 years. Fortunately this is a simple process that can be accomplished at home. All you need is a small flathead screwdriver and a bit of patience.

The first step is to remove the manual key. This can be done by pressing the blue SAAB logo on the fob of your key and pulling the emergency key out. It may take some force but the key will be released easily. Once you are able to open the key fob then you can remove the old battery by gently pushing the screwdriver into the slot in the middle of the case. The case will be split making it easier for you to access the electronic components.

Once you have the new battery and key fob case in place Now is the time to program the new key. saab key programming near me can be done by following the instructions in this YouTube video from YouTube user Cyclone Cyd. This is an excellent video channel that provides instructions on how to perform simple maintenance and repair jobs on vehicles.


A key fob can be an ideal way to store an extra car key in the event you break or lose your original. You can purchase a replacement key fob from the internet or at an authorised locksmith in your area, like United Locksmith. The cost is significantly less than if you purchase the key at a dealership. They would charge for the key, and then program it into your vehicle.

Website: https://thekeylab.co.uk/saab-car-keys/