Notes

10 Misconceptions Your Boss Holds Concerning Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap between the window and the door is substantial, you may want to use an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a number of problems such as sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. window repairs near me is typically caused by screws that have become undone over time, but it can be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. The first step is to close the window and then perform an experiment fit. The corners of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and wet floors. Windows that leak water do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

It is a fairly easy fix that can be done by any skilled DIYer. Based on the severity of the problem the old caulking may require removal before a new layer of caulk is applied. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze, it may be hinges at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change a window hinge however it is easier if someone else helps you hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation in the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it may be feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.


Another, and most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on the top of your windowsill. They will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc window you should consult a professional as soon as possible.

Homepage: https://www.repairmywindowsanddoors.co.uk/birmingham-windowrepair/