Notes

17 Reasons You Shouldn't Ignore Repairs To Upvc Windows
Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However If windows with double panes are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to source some plastic spacers that assist the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is large, you might want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fit. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. The first step is to close the window and perform an experiment to ensure that it fits. The corners of the sash should align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is important to take action if get up each morning to find a smoky wall and wet floors. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repair s, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal rather than the frame. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens in the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.


Like any mechanical component, hinges can be damaged over time. It is essentially a simple process but it can be easier when you have a person to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be disaligned as a result of wear, creating gaps where the sash and frame meet. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to have them re-aligned or replaced. In addition, the interlock could be unbalanced. It is located on the hinge's side, and may need to be cleaned. In some instances it is possible to replace them.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. They can help keep cold air out and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your upvc window you should consult an expert as soon as possible.

Website: https://www.repairmywindowsanddoors.co.uk/crystalpalace-windowrepair/