Notes

5 Things That Everyone Is Misinformed About About Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

It is crucial that your double-glazed doors function smoothly, or else you'll lose energy and increase the chances of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

It can be frustrating when a key snaps inside a lock. It can also be a security problem in that it can leave you vulnerable to burglars if your door does not lock. There are a couple of quick fixes you can make to repair the issue and get your door working again.

Be calm. If you panic and start playing around with your keys, you might just end up pushing the broken piece of the key further into the lock, thereby making the situation worse.

Spray WD-40 or another penetrating lubricant into the lock. This will allow the broken piece to come out more easily. You can also use the screwdriver to break up any pieces stuck. If you're lucky enough to have a small piece of the key that is visible it, you can make use of a paperclip or other thin metal object to grab it and pull it out. Both of these methods work, but be very careful not to push the broken piece of the key even further into the keyway.

Some paperclips have grooved edges that could serve as a hook extractor and some jigsaw blades are also suitable for this purpose. If you don't have any of them available, you can use needle-nose pliers to bend them and create hooks. Also, a pair tweezers can be used to grip and remove the remaining part of the broken key.

If you are unable to get the broken piece of key out, try using a lock de-icer. It is available at all hardware stores, and it works by freezing any moisture or ice that might be in the lock.

If none of these methods appear to be working then it's probably time to call in locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are easier to use. You can schedule a double-glazing repair online or call us to discuss your needs.

Broken Cylinder

A broken cylinder can be a major security risk. A professional locksmith is able to repair the cylinder. To fix the cylinder, locksmiths will need to tap it. They can do this with the hammer or any other tool, but the most efficient method is to make use of a long match or piece of wire. Position the match or the wire end near the keyway. The locksmith can then hit the lock to crack it. This is much better than using a heavy hammer that could cause damage to the lock.

Overheating is the main cause of cylinder heads cracking. This can happen when the cylinder block and head are made of different metals, like cast iron and aluminum. When the various metals are heated and cool at different rates, it can cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion is a different cause of cracks in the cylinder. If the head and block of a cylinder are not maintained correctly they could rust or corrode, which can cause them to expand faster than they would normally. As time passes, this may also cause cracks.

If your uPVC window lock or door is stiff or requires an enormous amount of pressure to turn, it could be due to many things. This can be caused by a faulty locking mechanism or misalignment as well as a worn-out handle.

Fortunately it is a simple and affordable fix for the majority of homeowners with double glazing. A professional locksmith will usually solve this issue within an hour of arriving at your property. They can replace the locking mechanisms, or replace the window handles and change the gearboxes, based on the specific requirements of your home. A professional locksmith will be able to inform you of the most cost-effective option for your home. They can even recommend upgrades to 3 Star security TS007 euro cylinders that will add an extra layer of protection against burglars. double glazing repair is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks may break. They have complex mechanisms that wear out over time. It can be difficult to determine the reason behind a broken window handle lock and fix it correctly.

If the issue is in the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you stop the draughts. It can be expensive to repair or replace your handle incorrectly and it can also harm the frame and lock of your door.

With the window open then loosen the screw that secures the handle with a screwdriver. The screw should be located on the inside of the backplate, which is usually covered by an eye-catching cap to conceal it to enhance the appearance. You should not be able to replace any internal parts of the handle, such as the levers and plates on either side. It is best to keep them in the same order so that you can replace them in the event of a need.

Then, with another screwdriver, loosen the screw that connects the handle with the spindle in the back. Once the screw is loose, you should be in a position to pull the handle away and pull off the damaged spindle. Replace this with a new one, making sure it's the same length as the old one (you will typically find them online or in hardware stores) and then securely screw it into place. Do not tighten the screw too much because this could cause damage to the handle and window frame.

Close the handle and test it. It should operate smoothly, and you will be able to open your window once again.

Be sure to double-check that your uPVC window is shut properly when you're using the handle. If they're not closing properly, you could experience damp or draughts inside your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure that they shut properly.

Broken Spindle


It is usually the case that the spindle inside the handle breaks, rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These kinds of windows require a handle which operates a locking mechanism in the window frame. The handle is attached to a central rod that triggers the cams with a mushroom shape that secure the window frame keep. If the dead latch mechanism fails to open after the handle has been turned, it is likely the spindle is damaged. This can be a frustrating issue.

Luckily there are options to remedy this situation. A reputable locksmith can swiftly and efficiently fix this problem. They can remove the window handle using a tool that removes the wheel part of the mechanism where the spindle goes. This can be done with no damage to the handle or the window frame.

After removing the wheel the technician can examine the spindle and determine what caused it to break. This involves disassembling the spindle, and then examining each component part, noting any damage or excessive wear. This process is usually performed by technicians in a clean and safe environment.

Then, clean the damaged spindle. This will help get rid of any dirt or other debris that might be preventing it from functioning normally. After that the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle cannot be repaired, it might require replacement. Home centers can sell generic replacements however if your window design is unique you'll have to speak with an expert in cabinet making or woodworking who can make the exact part. Once the new spindle is installed, it can be positioned to the handle by lining up the screw holes on the handle and the frame existing screws. Once the handle is firmly seated, you can operate your uPVC windows.

Homepage: https://www.repairmywindowsanddoors.co.uk/brentwood-windowrepair/