Notes

The Advanced Guide To Double Glazing Door Lock Repairs
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism deteriorated? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

It's important that your double-glazed doors work smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

If a key breaks within a lock, it can be extremely annoying. It can also be a security risk in that it can make you vulnerable to burglars if your door is not locked. Fortunately, there are quick fixes that you can attempt to fix the issue and get your door functioning correctly.

First, remember to stay calm. If you panic you may end up pushing the damaged key further into the lock.

Then spray WD-40 or a different penetrating oil into the lock to make the broken piece slip out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you're fortunate enough to have a little bit of the key that is sticking out, you can make use of a paperclip or other metal object that is thin to grab it and remove it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that could serve as hook extractors and jigsaw blades are also suitable for this function. If you do not have any of these available, you can use needle-nose pliers to bend them and create a hook. Finally, you can make use of a pair of tweezers to grab and pull out the last piece of broken keys.

If you are unable to remove the broken piece of key Use a lock deicer. It's available at most hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these strategies appear to be working, it might be time to call a locksmith. Fitlocks experts can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms so that they are simpler to operate. Get a double glazing repair through us online, or give us a phone call to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose an extremely risky security issue. It's a good thing that it's a simple repair for a professional locksmith to complete. A locksmith will have to tap the cylinder to repair it. They can do this using an hammer or another tool, but the best method is to make use of an extended match or piece of wire. Then, position the match's tip or wire in the keyway. The locksmith will then strike the lock in order to crack it. This is better than using a hammer that could damage the lock.

The most frequent cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and head are made of various metals, including cast iron and aluminum. When the different metals are heated and cool at different rates, it could cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.


Another possible cause for cracks in the cylinder is corrosion. If the cylinder head and the cylinder block aren't maintained properly, this could lead to rusting or corrosion and cause them to expand at a a higher rate than they should. As time passes, this may also cause cracks.

If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, this could be due to a number of things. A faulty locking mechanism, misalignment, or a worn handle are common reasons for this issue.

It is a quick and affordable fix that the majority of double glazing owners can do. A professional locksmith should be able solve this issue within a matter of hours of arriving at your home. Depending on the needs of your home, they can replace the locking mechanism, replace the window handles, and also change the gearboxes. A professional locksmith will be able to advise you of the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection from burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.

double glazing repair near me 's not surprising that window handle locks can break. They have complex mechanisms which deteriorate over time. If yours fails, it can be difficult to pinpoint the cause of the issue. Make sure you fix it properly.

Whether the problem is with the internal locking mechanism or the latch, fixing your broken handle will improve your uPVC double glazing door's security and allow you to stop the draughts. If you do not repair or replace your handle can be expensive and can cause damage to the door's frame and lock and frame, so it's worth spending some time to do it correctly.

Screwdriver: With the window open remove the screw that holds the handle. The screw should be on the inside of the backplate, which is usually hidden by a screw cap for aesthetic reasons. Be sure not to damage any of the internal components within the handle, for example the plates or levers on either side of the spindle. Keep them in the same order to make it easier to replace if necessary.

Then, using another screwdriver take the screw off that connects the handle to the spindle at the back. Once the screw is free, you can take the handle off and remove the broken spindle. Replace it with a brand new one, ensuring it's the same length as the old one (you will typically find them online or in hardware stores) and then securely screw it in place. Don't over tighten the screw because this could cause damage to the handle and window frame.

Close the handle and test it. It should operate smoothly, and you will be able to open your window once more.

While you're working on the handle, be sure to check your uPVC windows are shut properly. If they aren't closing properly, you may experience draughts or damp in your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on the window frames to ensure that they close properly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate a locking device in the frame of the window. The handle is attached to a central rod that triggers the locks that are shaped like mushrooms and secure the window frame keep. If the dead latch mechanism is not able to open after the handle has been turned, it's likely the spindle is broken. This could be a frustrating problem.

There are ways to fix this issue. A professional locksmith will be able to quickly and efficiently repair this problem. A good locksmith will be able disassemble the window's handle using a tool to remove the wheel part that houses the spindle. This can be done without damaging the handle or causing any other damage to the window frame.

After the wheel has been removed, the technician will examine the spindle to determine what caused it to break. This involves breaking down the spindle into its component parts and carefully recording their general condition, as well as any specific areas of wear or damage. This procedure is usually performed in a clean room by highly skilled technicians.

Then, clean the damaged spindle. This will help get rid of any dirt or other debris that could be hindering it from working normally. After this the spindle can be repaired or replaced. If it's being replaced, the technician could use a dowel of a similar size to the one used in the first and drill mating holes into both parts of the spindle. This ensures that the new spindle has precisely matched to the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centers sell generic replacements. However, if the design of your window is unique then it is necessary to contact a wood worker or cabinet maker who can make the exact part for you. Once the new spindle is installed, it can be fitted to the handle by line up the screw holes on the handle with the frame's existing screws. Once the handle is seated, you can operate your uPVC windows.

My Website: https://www.repairmywindowsanddoors.co.uk/acton-windowrepair/